patch-2.2.10 linux/drivers/net/irda/smc-ircc.c
Next file: linux/drivers/net/irda/tekram.c
Previous file: linux/drivers/net/irda/pc87108.c
Back to the patch index
Back to the overall index
- Lines: 970
- Date:
Mon Jun 7 16:19:59 1999
- Orig file:
v2.2.9/linux/drivers/net/irda/smc-ircc.c
- Orig date:
Wed Dec 31 16:00:00 1969
diff -u --recursive --new-file v2.2.9/linux/drivers/net/irda/smc-ircc.c linux/drivers/net/irda/smc-ircc.c
@@ -0,0 +1,969 @@
+/*********************************************************************
+ *
+ * Filename: smc-ircc.c
+ * Version: 0.1
+ * Description: Driver for the SMC Infrared Communications Controller (SMC)
+ * Status: Experimental.
+ * Author: Thomas Davis (tadavis@jps.net)
+ * Created at:
+ * Modified at: Wed May 19 15:30:08 1999
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-1999 Thomas Davis, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * I, Thomas Davis, admit no liability nor provide warranty for any
+ * of this software. This material is provided "AS-IS" and at no charge.
+ *
+ * Applicable Models : Fujitsu Lifebook 635t
+ * Sony PCG-505TX (gets DMA wrong.)
+ *
+ ********************************************************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/malloc.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/byteorder.h>
+
+#include <net/irda/wrapper.h>
+#include <net/irda/irda.h>
+#include <net/irda/irmod.h>
+#include <net/irda/irlap_frame.h>
+#include <net/irda/irda_device.h>
+
+#include <net/irda/smc-ircc.h>
+#include <net/irda/irport.h>
+
+static char *driver_name = "smc-ircc";
+
+#define CHIP_IO_EXTENT 8
+
+static unsigned int io[] = { 0x2e8, 0x140, ~0, ~0 };
+static unsigned int io2[] = { 0x2f8, 0x3e8, 0, 0};
+
+static struct ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL};
+
+/* Some prototypes */
+static int ircc_open( int i, unsigned int iobase, unsigned int board_addr);
+static int ircc_close( struct irda_device *idev);
+static int ircc_probe( int iobase, int board_addr);
+static int ircc_dma_receive( struct irda_device *idev);
+static int ircc_dma_receive_complete(struct irda_device *idev, int iobase);
+static int ircc_hard_xmit( struct sk_buff *skb, struct device *dev);
+static void ircc_dma_write( struct irda_device *idev, int iobase);
+static void ircc_change_speed( struct irda_device *idev, int baud);
+static void ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void ircc_wait_until_sent( struct irda_device *idev);
+static int ircc_is_receiving( struct irda_device *idev);
+
+static int ircc_net_init( struct device *dev);
+static int ircc_net_open( struct device *dev);
+static int ircc_net_close( struct device *dev);
+
+static int ircc_debug=3;
+static int ircc_irq=255;
+static int ircc_dma=255;
+
+static inline void register_bank(int port, int bank)
+{
+ outb(((inb(port+UART_MASTER) & 0xF0) | (bank & 0x07)),
+ port+UART_MASTER);
+}
+
+static inline unsigned int serial_in(int port, int offset)
+{
+ return inb(port+offset);
+}
+
+static inline void serial_out(int port, int offset, int value)
+{
+ outb(value, port+offset);
+}
+
+/*
+ * Function ircc_init ()
+ *
+ * Initialize chip. Just try to find out how many chips we are dealing with
+ * and where they are
+ */
+__initfunc(int ircc_init(void))
+{
+ int i;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+ for ( i=0; (io[i] < 2000) && (i < 4); i++) {
+ int ioaddr = io[i];
+ if (check_region(ioaddr, CHIP_IO_EXTENT))
+ continue;
+ if (ircc_open( i, io[i], io2[i]) == 0)
+ return 0;
+ }
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+
+ return -ENODEV;
+}
+
+/*
+ * Function ircc_cleanup ()
+ *
+ * Close all configured chips
+ *
+ */
+#ifdef MODULE
+static void ircc_cleanup(void)
+{
+ int i;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ for ( i=0; i < 4; i++) {
+ if ( dev_self[i])
+ ircc_close( &(dev_self[i]->idev));
+ }
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+}
+#endif /* MODULE */
+
+/*
+ * Function ircc_open (iobase, irq)
+ *
+ * Open driver instance
+ *
+ */
+static int ircc_open( int i, unsigned int iobase, unsigned int iobase2)
+{
+ struct ircc_cb *self;
+ struct irda_device *idev;
+ int ret;
+ int config;
+
+ DEBUG( ircc_debug, __FUNCTION__ " -->\n");
+
+ if ((config = ircc_probe( iobase, iobase2)) == -1) {
+ DEBUG(ircc_debug,
+ __FUNCTION__ ": addr 0x%04x - no device found!\n", iobase);
+ return -1;
+ }
+
+ /*
+ * Allocate new instance of the driver
+ */
+ self = kmalloc( sizeof(struct ircc_cb), GFP_KERNEL);
+ if ( self == NULL) {
+ printk( KERN_ERR "IrDA: Can't allocate memory for "
+ "IrDA control block!\n");
+ return -ENOMEM;
+ }
+ memset(self, 0, sizeof(struct ircc_cb));
+
+ /* Need to store self somewhere */
+ dev_self[i] = self;
+
+ idev = &self->idev;
+
+ /* Initialize IO */
+ idev->io.iobase = iobase;
+ idev->io.iobase2 = iobase2; /* Used by irport */
+ idev->io.irq = config >> 4 & 0x0f;
+ if (ircc_irq < 255) {
+ printk(KERN_INFO "smc: Overriding IRQ - chip says %d, using %d\n",
+ idev->io.irq, ircc_irq);
+ idev->io.irq = ircc_irq;
+ }
+ idev->io.io_ext = CHIP_IO_EXTENT;
+ idev->io.io_ext2 = 8; /* Used by irport */
+ idev->io.dma = config & 0x0f;
+ if (ircc_dma < 255) {
+ printk(KERN_INFO "smc: Overriding DMA - chip says %d, using %d\n",
+ idev->io.dma, ircc_dma);
+ idev->io.dma = ircc_dma;
+ }
+ idev->io.fifo_size = 16;
+
+ /* Lock the port that we need */
+ ret = check_region( idev->io.iobase, idev->io.io_ext);
+ if ( ret < 0) {
+ DEBUG( 0, __FUNCTION__ ": can't get iobase of 0x%03x\n",
+ idev->io.iobase);
+ /* ircc_cleanup( self->idev); */
+ return -ENODEV;
+ }
+ ret = check_region( idev->io.iobase2, idev->io.io_ext2);
+ if ( ret < 0) {
+ DEBUG( 0, __FUNCTION__ ": can't get iobase of 0x%03x\n",
+ idev->io.iobase2);
+ /* ircc_cleanup( self->idev); */
+ return -ENODEV;
+ }
+ request_region( idev->io.iobase, idev->io.io_ext, idev->name);
+ request_region( idev->io.iobase2, idev->io.io_ext2, idev->name);
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies( &idev->qos);
+
+#if 1
+ /* The only value we must override it the baudrate */
+ idev->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8);
+#else
+ /* The only value we must override it the baudrate */
+ idev->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600|
+ IR_115200;
+#endif
+
+ idev->qos.min_turn_time.bits = 0x07;
+ irda_qos_bits_to_value( &idev->qos);
+
+ idev->flags = IFF_FIR|IFF_SIR|IFF_DMA|IFF_PIO;
+
+ /* Specify which buffer allocation policy we need */
+ idev->rx_buff.flags = GFP_KERNEL | GFP_DMA;
+ idev->tx_buff.flags = GFP_KERNEL | GFP_DMA;
+
+ /* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
+ idev->rx_buff.truesize = 4000;
+ idev->tx_buff.truesize = 4000;
+
+ /* Initialize callbacks */
+ idev->change_speed = ircc_change_speed;
+ idev->wait_until_sent = ircc_wait_until_sent;
+ idev->is_receiving = ircc_is_receiving;
+
+ /* Override the network functions we need to use */
+ idev->netdev.init = ircc_net_init;
+ idev->netdev.hard_start_xmit = ircc_hard_xmit;
+ idev->netdev.open = ircc_net_open;
+ idev->netdev.stop = ircc_net_close;
+
+ irport_start(idev, iobase2);
+
+ /* Open the IrDA device */
+ irda_device_open( idev, driver_name, self);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+/*
+ * Function ircc_close (idev)
+ *
+ * Close driver instance
+ *
+ */
+static int ircc_close( struct irda_device *idev)
+{
+ int iobase;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ ASSERT( idev != NULL, return -1;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return -1;);
+
+ iobase = idev->io.iobase;
+
+ irport_stop(idev, idev->io.iobase2);
+
+ register_bank(iobase, 0);
+ serial_out(iobase, UART_IER, 0);
+ serial_out(iobase, UART_MASTER, UART_MASTER_RESET);
+
+ register_bank(iobase, 1);
+
+ serial_out(iobase, UART_SCE_CFGA,
+ UART_CFGA_IRDA_SIR_A | UART_CFGA_TX_POLARITY);
+ serial_out(iobase, UART_SCE_CFGB, UART_CFGB_IR);
+
+ /* Release the PORT that this driver is using */
+ DEBUG( ircc_debug,
+ __FUNCTION__ ": releasing 0x%03x\n", idev->io.iobase);
+
+ release_region( idev->io.iobase, idev->io.io_ext);
+
+ if ( idev->io.iobase2) {
+ DEBUG( ircc_debug, __FUNCTION__ ": releasing 0x%03x\n",
+ idev->io.iobase2);
+ release_region( idev->io.iobase2, idev->io.io_ext2);
+ }
+
+ irda_device_close( idev);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+/*
+ * Function ircc_probe (iobase, board_addr, irq, dma)
+ *
+ * Returns non-negative on success.
+ *
+ */
+static int ircc_probe( int iobase, int iobase2)
+{
+ int version = 1;
+ int low, high, chip, config, dma, irq;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ register_bank(iobase, 3);
+ high = serial_in(iobase, UART_ID_HIGH);
+ low = serial_in(iobase, UART_ID_LOW);
+ chip = serial_in(iobase, UART_CHIP_ID);
+ version = serial_in(iobase, UART_VERSION);
+ config = serial_in(iobase, UART_INTERFACE);
+ irq = config >> 4 & 0x0f;
+ dma = config & 0x0f;
+
+ if (high == 0x10 && low == 0xb8 && chip == 0xf1) {
+ DEBUG(0, "SMC IrDA Controller found; version = %d, "
+ "port 0x%04x, dma %d, interrupt %d\n",
+ version, iobase, dma, irq);
+ } else {
+ return -1;
+ }
+
+ serial_out(iobase, UART_MASTER, 0);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+
+ return config;
+}
+
+/*
+ * Function ircc_change_speed (idev, baud)
+ *
+ * Change the speed of the device
+ *
+ */
+static void ircc_change_speed( struct irda_device *idev, int speed)
+{
+ struct ircc_cb *self;
+ int iobase, ir_mode, select, fast;
+
+ DEBUG(ircc_debug+1, __FUNCTION__ " -->\n");
+
+ ASSERT(idev != NULL, return;);
+ ASSERT(idev->magic == IRDA_DEVICE_MAGIC, return;);
+
+ self = idev->priv;
+ iobase = idev->io.iobase;
+
+ /* Update accounting for new speed */
+ idev->io.baudrate = speed;
+
+ switch ( speed) {
+ case 9600:
+ case 19200:
+ case 37600:
+ case 57600:
+ case 115200:
+ DEBUG(ircc_debug+1,
+ __FUNCTION__ ": using irport to change speed to %d\n",
+ speed);
+ register_bank(iobase, 0);
+ serial_out(iobase, UART_IER, 0);
+ serial_out(iobase, UART_MASTER, UART_MASTER_RESET);
+ serial_out(iobase, UART_MASTER, UART_MASTER_INT_EN);
+ irport_start(idev, idev->io.iobase2);
+ irport_change_speed( idev, speed);
+ return;
+ break;
+
+ case 576000:
+ ir_mode = UART_CFGA_IRDA_HDLC;
+ select = 0;
+ fast = 0;
+ DEBUG( ircc_debug, __FUNCTION__ ": handling baud of 576000\n");
+ break;
+ case 1152000:
+ ir_mode = UART_CFGA_IRDA_HDLC;
+ select = UART_1152;
+ fast = 0;
+ DEBUG(ircc_debug, __FUNCTION__ ": handling baud of 1152000\n");
+ break;
+ case 4000000:
+ ir_mode = UART_CFGA_IRDA_4PPM;
+ select = 0;
+ fast = UART_LCR_A_FAST;
+ DEBUG(ircc_debug, __FUNCTION__ ": handling baud of 4000000\n");
+ break;
+ default:
+ DEBUG( 0, __FUNCTION__ ": unknown baud rate of %d\n", speed);
+ return;
+ }
+
+#if 0
+ serial_out(idev->io.iobase2, 4, 0x08);
+#endif
+
+ serial_out(iobase, UART_MASTER, UART_MASTER_RESET);
+
+ register_bank(iobase, 0);
+ serial_out(iobase, UART_IER, 0);
+
+ irport_stop(idev, idev->io.iobase2);
+
+ idev->netdev.tbusy = 0;
+
+ register_bank(iobase, 1);
+
+ serial_out(iobase, UART_SCE_CFGA,
+ ((serial_in(iobase, UART_SCE_CFGA) & 0x87) | ir_mode));
+
+ serial_out(iobase, UART_SCE_CFGB,
+ ((serial_in(iobase, UART_SCE_CFGB) & 0x3f) | UART_CFGB_IR));
+
+ (void) serial_in(iobase, UART_FIFO_THRESHOLD);
+ serial_out(iobase, UART_FIFO_THRESHOLD, 64);
+
+ register_bank(iobase, 4);
+
+ serial_out(iobase, UART_CONTROL,
+ (serial_in(iobase, UART_CONTROL) & 0x30)
+ | select | UART_CRC );
+
+ register_bank(iobase, 0);
+
+ serial_out(iobase, UART_LCR_A, fast);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+}
+
+/*
+ * Function ircc_hard_xmit (skb, dev)
+ *
+ * Transmit the frame!
+ *
+ */
+static int ircc_hard_xmit( struct sk_buff *skb, struct device *dev)
+{
+ struct irda_device *idev;
+ int iobase;
+ int mtt;
+
+ DEBUG(ircc_debug+1, __FUNCTION__ " -->\n");
+ idev = (struct irda_device *) dev->priv;
+
+ ASSERT( idev != NULL, return 0;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return 0;);
+
+ iobase = idev->io.iobase;
+
+ DEBUG(ircc_debug+1, __FUNCTION__ "(%ld), skb->len=%d\n", jiffies, (int) skb->len);
+
+ /* Use irport for SIR speeds */
+ if (idev->io.baudrate <= 115200) {
+ DEBUG(ircc_debug+1, __FUNCTION__ ": calling irport_hard_xmit\n");
+ return irport_hard_xmit(skb, dev);
+ }
+
+ DEBUG(ircc_debug, __FUNCTION__ ": using dma; len=%d\n", skb->len);
+
+ /* Lock transmit buffer */
+ if (irda_lock((void *) &dev->tbusy) == FALSE)
+ return -EBUSY;
+
+ memcpy( idev->tx_buff.head, skb->data, skb->len);
+
+ /* Make sure that the length is a multiple of 16 bits */
+ if ( skb->len & 0x01)
+ skb->len++;
+
+ idev->tx_buff.len = skb->len;
+ idev->tx_buff.data = idev->tx_buff.head;
+#if 0
+ idev->tx_buff.offset = 0;
+#endif
+
+ mtt = irda_get_mtt( skb);
+
+ /* Use udelay for delays less than 50 us. */
+ if (mtt)
+ udelay( mtt);
+
+ ircc_dma_write( idev, iobase);
+
+ dev_kfree_skb( skb);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+/*
+ * Function ircc_dma_xmit (idev, iobase)
+ *
+ * Transmit data using DMA
+ *
+ */
+static void ircc_dma_write( struct irda_device *idev, int iobase)
+{
+ struct ircc_cb *self;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ ASSERT( idev != NULL, return;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return;);
+
+ self = idev->priv;
+ iobase = idev->io.iobase;
+
+ setup_dma( idev->io.dma, idev->tx_buff.data, idev->tx_buff.len,
+ DMA_MODE_WRITE);
+
+ idev->io.direction = IO_XMIT;
+
+ serial_out(idev->io.iobase2, 4, 0x08);
+
+ register_bank(iobase, 4);
+ serial_out(iobase, UART_CONTROL,
+ (serial_in(iobase, UART_CONTROL) & 0xF0));
+
+ serial_out(iobase, UART_BOF_COUNT_LO, 2);
+ serial_out(iobase, UART_BRICKWALL_CNT_LO, 0);
+#if 1
+ serial_out(iobase, UART_BRICKWALL_TX_CNT_HI, idev->tx_buff.len >> 8);
+ serial_out(iobase, UART_TX_SIZE_LO, idev->tx_buff.len & 0xff);
+#else
+ serial_out(iobase, UART_BRICKWALL_TX_CNT_HI, 0);
+ serial_out(iobase, UART_TX_SIZE_LO, 0);
+#endif
+
+ register_bank(iobase, 1);
+ serial_out(iobase, UART_SCE_CFGB,
+ serial_in(iobase, UART_SCE_CFGB) | UART_CFGB_DMA_ENABLE);
+
+ register_bank(iobase, 0);
+
+ serial_out(iobase, UART_IER, UART_IER_ACTIVE_FRAME | UART_IER_EOM);
+ serial_out(iobase, UART_LCR_B,
+ UART_LCR_B_SCE_TRANSMIT|UART_LCR_B_SIP_ENABLE);
+
+ serial_out(iobase, UART_MASTER, UART_MASTER_INT_EN);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+}
+
+/*
+ * Function ircc_dma_xmit_complete (idev)
+ *
+ * The transfer of a frame in finished. This function will only be called
+ * by the interrupt handler
+ *
+ */
+static void ircc_dma_xmit_complete( struct irda_device *idev, int underrun)
+{
+ struct ircc_cb *self;
+ int iobase, d;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ ASSERT( idev != NULL, return;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return;);
+
+ register_bank(idev->io.iobase, 1);
+
+ serial_out(idev->io.iobase, UART_SCE_CFGB,
+ serial_in(idev->io.iobase, UART_SCE_CFGB) &
+ ~UART_CFGB_DMA_ENABLE);
+
+ d = get_dma_residue(idev->io.dma);
+
+ DEBUG(ircc_debug, __FUNCTION__ ": dma residue = %d, len=%d, sent=%d\n",
+ d, idev->tx_buff.len, idev->tx_buff.len - d);
+
+ self = idev->priv;
+
+ iobase = idev->io.iobase;
+
+ /* Check for underrrun! */
+ if ( underrun) {
+ idev->stats.tx_errors++;
+ idev->stats.tx_fifo_errors++;
+ } else {
+ idev->stats.tx_packets++;
+ idev->stats.tx_bytes += idev->tx_buff.len;
+ }
+
+ /* Unlock tx_buff and request another frame */
+ idev->netdev.tbusy = 0; /* Unlock */
+ idev->media_busy = FALSE;
+
+ /* Tell the network layer, that we can accept more frames */
+ mark_bh( NET_BH);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+}
+
+/*
+ * Function ircc_dma_receive (idev)
+ *
+ * Get ready for receiving a frame. The device will initiate a DMA
+ * if it starts to receive a frame.
+ *
+ */
+static int ircc_dma_receive( struct irda_device *idev)
+{
+ struct ircc_cb *self;
+ int iobase;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ ASSERT( idev != NULL, return -1;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return -1;);
+
+ self = idev->priv;
+ iobase= idev->io.iobase;
+
+ setup_dma( idev->io.dma, idev->rx_buff.data, idev->rx_buff.truesize,
+ DMA_MODE_READ);
+
+ /* driver->media_busy = FALSE; */
+ idev->io.direction = IO_RECV;
+ idev->rx_buff.data = idev->rx_buff.head;
+#if 0
+ idev->rx_buff.offset = 0;
+#endif
+
+ register_bank(iobase, 4);
+ serial_out(iobase, UART_CONTROL,
+ (serial_in(iobase, UART_CONTROL) &0xF0));
+ serial_out(iobase, UART_BOF_COUNT_LO, 2);
+ serial_out(iobase, UART_BRICKWALL_CNT_LO, 0);
+ serial_out(iobase, UART_BRICKWALL_TX_CNT_HI, 0);
+ serial_out(iobase, UART_TX_SIZE_LO, 0);
+ serial_out(iobase, UART_RX_SIZE_HI, 0);
+ serial_out(iobase, UART_RX_SIZE_LO, 0);
+
+ register_bank(iobase, 0);
+ serial_out(iobase,
+ UART_LCR_B, UART_LCR_B_SCE_RECEIVE | UART_LCR_B_SIP_ENABLE);
+
+ register_bank(iobase, 1);
+ serial_out(iobase, UART_SCE_CFGB,
+ serial_in(iobase, UART_SCE_CFGB) |
+ UART_CFGB_DMA_ENABLE | UART_CFGB_DMA_BURST);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+/*
+ * Function ircc_dma_receive_complete (idev)
+ *
+ * Finished with receiving frames
+ *
+ *
+ */
+static int ircc_dma_receive_complete( struct irda_device *idev, int iobase)
+{
+ struct sk_buff *skb;
+ struct ircc_cb *self;
+ int len, msgcnt;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ self = idev->priv;
+
+ msgcnt = serial_in(idev->io.iobase, UART_LCR_B) & 0x08;
+
+ DEBUG(ircc_debug, __FUNCTION__ ": dma count = %d\n",
+ get_dma_residue(idev->io.dma));
+
+ len = idev->rx_buff.truesize - get_dma_residue(idev->io.dma) - 4;
+
+ DEBUG(ircc_debug, __FUNCTION__ ": msgcnt = %d, len=%d\n", msgcnt, len);
+
+ skb = dev_alloc_skb( len+1);
+
+ if (skb == NULL) {
+ printk( KERN_INFO __FUNCTION__
+ ": memory squeeze, dropping frame.\n");
+ return FALSE;
+ }
+
+ /* Make sure IP header gets aligned */
+ skb_reserve( skb, 1);
+ skb_put( skb, len);
+
+ memcpy(skb->data, idev->rx_buff.data, len);
+ idev->stats.rx_packets++;
+
+ skb->dev = &idev->netdev;
+ skb->mac.raw = skb->data;
+ skb->protocol = htons(ETH_P_IRDA);
+ netif_rx( skb);
+
+ register_bank(idev->io.iobase, 1);
+ serial_out(idev->io.iobase, UART_SCE_CFGB,
+ serial_in(idev->io.iobase, UART_SCE_CFGB) &
+ ~UART_CFGB_DMA_ENABLE);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return TRUE;
+}
+
+/*
+ * Function ircc_interrupt (irq, dev_id, regs)
+ *
+ * An interrupt from the chip has arrived. Time to do some work
+ *
+ */
+static void ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ int iobase, iir;
+
+ struct irda_device *idev = (struct irda_device *) dev_id;
+
+ DEBUG(ircc_debug+1, __FUNCTION__ " -->\n");
+
+ if (idev == NULL) {
+ printk( KERN_WARNING "%s: irq %d for unknown device.\n",
+ driver_name, irq);
+ return;
+ }
+
+ if (idev->io.baudrate <= 115200) {
+ DEBUG(ircc_debug+1, __FUNCTION__
+ ": routing interrupt to irport_interrupt\n");
+ return irport_interrupt( irq, dev_id, regs);
+ }
+
+ iobase = idev->io.iobase;
+
+ idev->netdev.interrupt = 1;
+
+ serial_out(iobase, UART_MASTER, 0);
+
+ register_bank(iobase, 0);
+
+ iir = serial_in(iobase, UART_IIR);
+
+ serial_out(iobase, UART_IER, 0);
+
+ DEBUG(ircc_debug, __FUNCTION__ ": iir = 0x%02x\n", iir);
+
+ if (iir & UART_IIR_EOM) {
+ DEBUG(ircc_debug, __FUNCTION__ ": UART_IIR_EOM\n");
+ if (idev->io.direction == IO_RECV) {
+ ircc_dma_receive_complete(idev, iobase);
+ } else {
+ ircc_dma_xmit_complete(idev, iobase);
+ }
+ ircc_dma_receive(idev);
+ }
+
+ if (iir & UART_IIR_ACTIVE_FRAME) {
+ DEBUG(ircc_debug, __FUNCTION__ ": UART_IIR_ACTIVE_FRAME\n");
+ idev->rx_buff.state = INSIDE_FRAME;
+#if 0
+ ircc_dma_receive(idev);
+#endif
+ }
+
+ if (iir & UART_IIR_RAW_MODE) {
+ DEBUG(ircc_debug, __FUNCTION__ ": IIR RAW mode interrupt.\n");
+ }
+
+ idev->netdev.interrupt = 0;
+
+ register_bank(iobase, 0);
+ serial_out(iobase, UART_IER, UART_IER_ACTIVE_FRAME|UART_IER_EOM);
+ serial_out(iobase, UART_MASTER, UART_MASTER_INT_EN);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+}
+
+/*
+ * Function ircc_wait_until_sent (idev)
+ *
+ * This function should put the current thread to sleep until all data
+ * have been sent, so it is safe to change the speed.
+ */
+static void ircc_wait_until_sent( struct irda_device *idev)
+{
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ /* Just delay 60 ms */
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(6);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+}
+
+/*
+ * Function ircc_is_receiving (idev)
+ *
+ * Return TRUE is we are currently receiving a frame
+ *
+ */
+static int ircc_is_receiving( struct irda_device *idev)
+{
+ int status = FALSE;
+ /* int iobase; */
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ ASSERT( idev != NULL, return FALSE;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return FALSE;);
+
+ DEBUG(ircc_debug, __FUNCTION__ ": dma count = %d\n",
+ get_dma_residue(idev->io.dma));
+
+ status = ( idev->rx_buff.state != OUTSIDE_FRAME);
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+
+ return status;
+}
+
+/*
+ * Function ircc_net_init (dev)
+ *
+ * Initialize network device
+ *
+ */
+static int ircc_net_init( struct device *dev)
+{
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ /* Setup to be a normal IrDA network device driver */
+ irda_device_setup( dev);
+
+ /* Insert overrides below this line! */
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+
+/*
+ * Function ircc_net_open (dev)
+ *
+ * Start the device
+ *
+ */
+static int ircc_net_open( struct device *dev)
+{
+ struct irda_device *idev;
+ int iobase;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ ASSERT( dev != NULL, return -1;);
+ idev = (struct irda_device *) dev->priv;
+
+ ASSERT( idev != NULL, return 0;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return 0;);
+
+ iobase = idev->io.iobase;
+
+ if (request_irq( idev->io.irq, ircc_interrupt, 0, idev->name,
+ (void *) idev)) {
+ return -EAGAIN;
+ }
+ /*
+ * Always allocate the DMA channel after the IRQ,
+ * and clean up on failure.
+ */
+ if (request_dma(idev->io.dma, idev->name)) {
+ free_irq( idev->io.irq, idev);
+ return -EAGAIN;
+ }
+
+ /* Ready to play! */
+ dev->tbusy = 0;
+ dev->interrupt = 0;
+ dev->start = 1;
+
+ /* turn on interrupts */
+
+ MOD_INC_USE_COUNT;
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+/*
+ * Function ircc_net_close (dev)
+ *
+ * Stop the device
+ *
+ */
+static int ircc_net_close(struct device *dev)
+{
+ struct irda_device *idev;
+ int iobase;
+
+ DEBUG(ircc_debug, __FUNCTION__ " -->\n");
+
+ /* Stop device */
+ dev->tbusy = 1;
+ dev->start = 0;
+
+ ASSERT( dev != NULL, return -1;);
+ idev = (struct irda_device *) dev->priv;
+
+ ASSERT( idev != NULL, return 0;);
+ ASSERT( idev->magic == IRDA_DEVICE_MAGIC, return 0;);
+
+ iobase = idev->io.iobase;
+
+ disable_dma( idev->io.dma);
+
+ /* Disable interrupts */
+
+ free_irq( idev->io.irq, idev);
+ free_dma( idev->io.dma);
+
+ MOD_DEC_USE_COUNT;
+
+ DEBUG( ircc_debug, "--> " __FUNCTION__ "\n");
+ return 0;
+}
+
+#ifdef MODULE
+
+MODULE_AUTHOR("Thomas Davis <tadavis@jps.net>");
+MODULE_DESCRIPTION("SMC IrCC controller driver");
+MODULE_PARM(ircc_debug,"1i");
+MODULE_PARM(ircc_dma, "1i");
+MODULE_PARM(ircc_irq, "1i");
+
+/*
+ * Function init_module (void)
+ *
+ *
+ *
+ */
+int init_module(void)
+{
+ return ircc_init();
+}
+
+/*
+ * Function cleanup_module (void)
+ *
+ *
+ *
+ */
+void cleanup_module(void)
+{
+ ircc_cleanup();
+}
+
+#endif
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)