patch-2.2.10 linux/include/net/irda/smc_ircc.h

• Lines: 124
• Date: Wed Dec 31 16:00:00 1969
• Orig file: v2.2.9/linux/include/net/irda/smc_ircc.h
• Orig date: Tue Dec 22 14:16:58 1998

diff -u --recursive --new-file v2.2.9/linux/include/net/irda/smc_ircc.h linux/include/net/irda/smc_ircc.h
@@ -1,123 +0,0 @@
-#if 0
-static char *rcsid = "$Id: smc_ircc.h,v 1.5 1998/07/27 01:25:29 ratbert Exp $";
-#endif
-
-#ifndef SMC_IRCC_H
-#define SMC_IRCC_H
-
-#define FIR_XMIT	1
-#define FIR_RECEIVE	2
-#define SIR_XMIT	3
-#define SIR_RECEIVE	4
-
-#define MASTER			0x07
-#define MASTER_POWERDOWN	1<<7
-#define MASTER_RESET		1<<6
-#define MASTER_INT_EN		1<<5
-#define MASTER_ERROR_RESET	1<<4
-
-/* Register block 0 */
-
-#define IIR	0x01
-#define IER	0x02
-#define LSR	0x03
-#define LCR_A	0x04
-#define LCR_B	0x05
-#define BSR	0x06
-
-#define IIR_ACTIVE_FRAME	1<<7
-#define IIR_EOM 		1<<6
-#define IIR_RAW_MODE		1<<5
-#define IIR_FIFO		1<<4
-
-#define IER_ACTIVE_FRAME	1<<7
-#define IER_EOM 		1<<6
-#define IER_RAW_MODE		1<<5
-#define IER_FIFO		1<<4
-
-#define LSR_UNDER_RUN		1<<7
-#define LSR_OVER_RUN		1<<6
-#define LSR_FRAME_ERROR 	1<<5
-#define LSR_SIZE_ERROR		1<<4
-#define LSR_CRC_ERROR		1<<3
-#define LSR_FRAME_ABORT 	1<<2
-
-#define LCR_A_FIFO_RESET        1<<7
-#define LCR_A_FAST              1<<6
-#define LCR_A_GP_DATA           1<<5
-#define LCR_A_RAW_TX            1<<4
-#define LCR_A_RAW_RX            1<<3
-#define LCR_A_ABORT             1<<2
-#define LCR_A_DATA_DONE         1<<1
-
-#define LCR_B_SCE_MODE_DISABLED 	0x00<<6
-#define LCR_B_SCE_MODE_TRANSMIT 	0x01<<6
-#define LCR_B_SCE_MODE_RECEIVE		0x02<<6
-#define LCR_B_SCE_MODE_UNDEFINED	0x03<<6
-#define LCR_B_SIP_ENABLE		1<<5
-#define LCR_B_BRICK_WALL		1<<4
-
-#define BSR_NOT_EMPTY	1<<7
-#define BSR_FIFO_FULL	1<<6
-#define BSR_TIMEOUT	1<<5
-
-/* Register block 1 */
-
-#define SCE_CFG_A	0x00
-#define SCE_CFG_B	0x01
-#define FIFO_THRESHOLD	0x02
-
-#define CFG_A_AUX_IR		0x01<<7
-#define CFG_A_HALF_DUPLEX	0x01<<2
-#define CFG_A_TX_POLARITY	0x01<<1
-#define CFG_A_RX_POLARITY	0x01
-
-#define CFG_A_COM		0x00<<3
-#define CFG_A_IRDA_SIR_A	0x01<<3
-#define CFG_A_ASK_SIR		0x02<<3
-#define CFG_A_IRDA_SIR_B	0x03<<3
-#define CFG_A_IRDA_HDLC 	0x04<<3
-#define CFG_A_IRDA_4PPM 	0x05<<3
-#define CFG_A_CONSUMER		0x06<<3
-#define CFG_A_RAW_IR		0x07<<3
-#define CFG_A_OTHER		0x08<<3
-
-#define IR_HDLC			0x04
-#define IR_4PPM			0x01
-#define IR_CONSUMER		0x02
-
-#define CFG_B_LOOPBACK		0x01<<5
-#define CFG_B_LPBCK_TX_CRC	0x01<<4
-#define CFG_B_NOWAIT		0x01<<3
-#define CFB_B_STRING_MOVE	0x01<<2
-#define CFG_B_DMA_BURST 	0x01<<1
-#define CFG_B_DMA_ENABLE	0x01
-
-#define CFG_B_MUX_COM		0x00<<6
-#define CFG_B_MUX_IR		0x01<<6
-#define CFG_B_MUX_AUX		0x02<<6
-#define CFG_B_INACTIVE		0x03<<6
-
-/* Register block 2 - Consumer IR - not used */
-
-/* Register block 3 - Identification Registers! */
-
-#define SMSC_ID_HIGH	0x00   /* 0x10 */
-#define SMSC_ID_LOW	0x01   /* 0xB8 */
-#define CHIP_ID 	0x02   /* 0xF1 */
-#define VERSION_NUMBER	0x03   /* 0x01 */
-#define HOST_INTERFACE	0x04   /* low 4 = DMA, high 4 = IRQ */
-
-/* Register block 4 - IrDA */
-#define IR_CONTROL        0x00
-#define BOF_COUNT_LO      0x01
-#define BRICK_WALL_CNT_LO 0x02
-#define BRICK_TX_CNT_HI   0x03
-#define TX_DATA_SIZE_LO   0x04
-#define RX_DATA_SIZE_HI   0x05
-#define RX_DATA_SIZE_LO   0x06
-
-#define SELECT_1152     0x01<<7
-#define CRC_SELECT      0x01<<6
-
-#endif