patch-2.2.15 linux/drivers/char/rio/map.h

• Lines: 104
• Date: Fri Apr 21 12:46:05 2000
• Orig file: v2.2.14/drivers/char/rio/map.h
• Orig date: Thu Jan 1 01:00:00 1970

diff -u --new-file --recursive --exclude-from ../../exclude v2.2.14/drivers/char/rio/map.h linux/drivers/char/rio/map.h
@@ -0,0 +1,103 @@
+/*
+** -----------------------------------------------------------------------------
+**
+**  Perle Specialix driver for Linux
+**  Ported from existing RIO Driver for SCO sources.
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**	Module		: map.h
+**	SID		: 1.2
+**	Last Modified	: 11/6/98 11:34:11
+**	Retrieved	: 11/6/98 11:34:21
+**
+**  ident @(#)map.h	1.2
+**
+** -----------------------------------------------------------------------------
+*/
+
+#ifndef __rio_map_h__
+#define __rio_map_h__
+
+#ifdef SCCS_LABELS
+static char *_map_h_sccs_ = "@(#)map.h	1.2";
+#endif
+
+/*
+** mapping structure passed to and from the config.rio program to
+** determine the current topology of the world
+*/
+
+#define MAX_MAP_ENTRY 17
+#define	TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS)
+#define	MAX_NAME_LEN 32
+
+struct Map
+{
+	uint	HostUniqueNum;	        /* Supporting hosts unique number */
+	uint	RtaUniqueNum;	        /* Unique number */
+	/*
+	** The next two IDs must be swapped on big-endian architectures
+	** when using a v2.04 /etc/rio/config with a v3.00 driver (when
+	** upgrading for example).
+	*/
+	ushort	ID;			/* ID used in the subnet */
+	ushort	ID2;			/* ID of 2nd block of 8 for 16 port */
+	ulong	Flags;			/* Booted, ID Given, Disconnected */
+	ulong	SysPort;		/* First tty mapped to this port */
+	struct Top   Topology[LINKS_PER_UNIT];	/* ID connected to each link */
+	char	Name[MAX_NAME_LEN];        /* Cute name by which RTA is known */
+};
+
+/*
+** Flag values:
+*/
+#define	RTA_BOOTED		0x00000001
+#define RTA_NEWBOOT		0x00000010
+#define	MSG_DONE		0x00000020
+#define	RTA_INTERCONNECT	0x00000040
+#define	RTA16_SECOND_SLOT	0x00000080
+#define	BEEN_HERE		0x00000100
+#define SLOT_TENTATIVE		0x40000000
+#define SLOT_IN_USE		0x80000000
+
+/*
+** HostUniqueNum is the unique number from the host card that this RTA
+** is to be connected to.
+** RtaUniqueNum is the unique number of the RTA concerned. It will be ZERO
+** if the slot in the table is unused. If it is the same as the HostUniqueNum
+** then this slot represents a host card.
+** Flags contains current boot/route state info
+** SysPort is a value in the range 0-504, being the number of the first tty
+** on this RTA. Each RTA supports 8 ports. The SysPort value must be modulo 8.
+** SysPort 0-127 correspond to /dev/ttyr001 to /dev/ttyr128, with minor
+** numbers 0-127. SysPort 128-255 correspond to /dev/ttyr129 to /dev/ttyr256,
+** again with minor numbers 0-127, and so on for SysPorts 256-383 and 384-511
+** ID will be in the range 0-16 for a `known' RTA. ID will be 0xFFFF for an
+** unused slot/unknown ID etc.
+** The Topology array contains the ID of the unit connected to each of the
+** four links on this unit. The entry will be 0xFFFF if NOTHING is connected
+** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link.
+** The Name field is a null-terminated string, upto 31 characters, containing
+** the 'cute' name that the sysadmin/users know the RTA by. It is permissible
+** for this string to contain any character in the range \040 to \176 inclusive.
+** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The
+** special character '%' IS allowable, and needs no special action.
+**
+*/
+
+#endif