patch-2.2.16 linux/drivers/net/n2.c

Next file: linux/drivers/net/olympic.c
Previous file: linux/drivers/net/irda/w83977af_ir.c
Back to the patch index
Back to the overall index

diff -urN v2.2.15/linux/drivers/net/n2.c linux/drivers/net/n2.c
@@ -0,0 +1,505 @@
+/*
+ * SDL Inc. RISCom/N2 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 1998-2000 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Requires hdlc.c, a generic HDLC support module
+ * Available from ftp://ftp.pm.waw.pl/pub/Linux/hdlc/
+ *
+ * Current status:
+ *    - this is work in progress
+ *    - no support for integrated CSU/DSU/DDS
+ *    - no support for SMP yet
+ *
+ * Tested with dual channel card with 2 Mbps FR links and with loopback
+ * at 10Mbps.
+ *
+ * Sources of information:
+ *    Hitachi HD64570 SCA User's Manual
+ *    SDL Inc. PPP/HDLC/CISCO driver
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/malloc.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include <linux/netdevice.h>
+
+#include "syncppp.h"
+#include <linux/hdlc.h>
+#include "hd64570.h"
+
+#define DEBUG_RINGS
+/* #define DEBUG_PKT */
+
+static const char* version = "SDL RISCom/N2 driver revision: 1.0-pre9";
+static const char* devname = "RISCom/N2";
+
+#define USE_WINDOWSIZE 16384
+#define USE_BUS16BITS 1
+#define CLOCK_BASE 9830400	/* 9.8304 MHz */
+
+#define N2_IOPORTS 0x10
+
+static char *hw=NULL;	/* pointer to hw=xxx command line string */
+
+/* RISCom/N2 Board Registers */
+
+/* PC Control Register */
+#define N2_PCR 0
+#define PCR_RUNSCA 1     /* Run 64570 */
+#define PCR_VPM    2     /* Enable VPM - needed if using RAM above 1 MB */
+#define PCR_ENWIN  4     /* Open window */
+#define PCR_BUS16  8     /* 16-bit bus */
+
+
+/* Memory Base Address Register */
+#define N2_BAR 2
+
+
+/* Page Scan Register  */
+#define N2_PSR 4
+#define WIN16K       0x00
+#define WIN32K       0x20
+#define WIN64K       0x40
+#define PSR_WINBITS  0x60
+#define PSR_DMAEN    0x80
+#define PSR_PAGEBITS 0x0F
+
+
+/* Modem Control Reg */
+#define N2_MCR 6
+#define CLOCK_OUT_PORT1 0x80
+#define CLOCK_OUT_PORT0 0x40
+#define TX422_PORT1     0x20
+#define TX422_PORT0     0x10
+#define DSR_PORT1       0x08
+#define DSR_PORT0       0x04
+#define DTR_PORT1       0x02
+#define DTR_PORT0       0x01
+
+
+typedef struct port_s {
+	hdlc_device hdlc;	/* HDLC device struct - must be first */
+	struct card_s *card;
+	int clkmode;		/* clock speed */
+	int loopback;
+	u8 valid;		/* port enabled */
+	u8 phy_node;		/* physical port # - 0 or 1 */
+	u8 log_node;		/* logical port # */
+	u8 rxin;		/* rx ring buffer 'in' pointer */
+	u8 txin;		/* tx ring buffer 'in' and 'last' pointers */
+	u8 txlast;
+}port_t;
+
+
+
+typedef struct card_s {
+	u8 *winbase;		/* ISA window base address */
+	u32 ram_size;		/* number of bytes */
+	u16 io;			/* IO Base address */
+	u16 buff_offset;	/* offset of first buffer of first channel */
+	u8 irq;			/* IRQ (3-15) */
+	u8 ring_buffers;	/* number of buffers in a ring */
+
+	port_t ports[2];
+	struct card_s *next_card;
+}card_t;
+
+
+
+#define sca_reg(reg, card) (0x8000 | card->io | \
+			    ((reg)&0x0F) | (((reg)&0xF0) << 6))
+#define sca_in(reg, card)		readb(sca_reg(reg, card))
+#define sca_out(value, reg, card)	writeb(value, sca_reg(reg, card))
+#define sca_inw(reg, card)		readw(sca_reg(reg, card))
+#define sca_outw(value, reg, card)	writew(value, sca_reg(reg, card))
+
+#define port_to_card(port)		(port->card)
+#define log_node(port)			(port->log_node)
+#define phy_node(port)			(port->phy_node)
+#define winsize(card)			(USE_WINDOWSIZE)
+#define winbase(card)      	     	(card->winbase)
+#define get_port(card, port)		(card->ports[port].valid ? \
+					 &card->ports[port] : NULL)
+
+
+static __inline__ u8 get_page(card_t *card)
+{
+	return inb(card->io+N2_PSR) & PSR_PAGEBITS;
+}
+
+
+static __inline__ void openwin(card_t *card, u8 page)
+{
+	u8 psr=inb(card->io+N2_PSR);
+	outb((psr & ~PSR_PAGEBITS) | page, card->io+N2_PSR);
+}
+
+
+static __inline__ void close_windows(card_t *card)
+{
+	outb(inb(card->io+N2_PCR) & ~PCR_ENWIN, card->io+N2_PCR);
+}
+
+
+static __inline__ int set_clock(port_t *port, int clock)
+{
+	int io=port->card->io;
+	u8 mcr = inb(io+N2_MCR);
+  
+	if (clock == LINE_EXT_CLOCK) /* External clock */
+		mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
+	else
+		mcr &= port->phy_node ? ~CLOCK_OUT_PORT1 : ~CLOCK_OUT_PORT0;
+
+	outb(mcr, io+N2_MCR);
+	port->clkmode = clock;
+	return 0;
+}
+
+
+
+#define select_phys_iface(port, iface) (-EINVAL) /* No hardware support */
+
+
+static __inline__ void open_port(port_t *port)
+{
+	int io=port->card->io;
+	u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
+
+	mcr &= port->phy_node ? ~DTR_PORT1 : ~DTR_PORT0; /* set DTR ON */
+	outb(mcr, io+N2_MCR);
+  
+	outb(inb(io+N2_PCR) | PCR_ENWIN, io+N2_PCR); /* open window */
+	outb(inb(io+N2_PSR) | PSR_DMAEN, io+N2_PSR); /* enable dma */
+}
+
+
+
+static __inline__ void close_port(port_t *port)
+{
+	int io=port->card->io;
+	u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
+
+	/* set DTR OFF */
+	mcr |= port->phy_node ? DTR_PORT1 : DTR_PORT0;
+	outb(mcr, io+N2_MCR);
+}
+
+
+
+#include "hd6457x.c"
+
+
+static u8 n2_count_page(card_t *card)
+{
+	u8 page;
+	int i, bcount=USE_WINDOWSIZE, wcount=USE_WINDOWSIZE/2;
+	u16 *dp=(u16*)card->winbase;
+	u8 *bp=(u8*)card->winbase;
+	u8 psr=inb(card->io+N2_PSR) & PSR_WINBITS;
+
+
+	for (page=0; page<16; page++) {
+		outb(psr | page, card->io+N2_PSR); /* select a page */
+		writeb(page, dp);
+		if (readb(dp) != page)
+			break;	/* If can't read back, no good memory */
+
+		outb(psr, card->io+N2_PSR); /* goto page 0 */
+		if (readb(dp))
+			break;	/* If page 0 changed, then wrapped around */
+
+		outb(psr | page, card->io+N2_PSR); /* select page again */
+
+		/*  first do byte tests */
+		for (i = 0; i < bcount; i++)
+			writeb(i, bp + i);
+		for (i = 0; i < bcount; i++)
+			if (readb(bp + i) != (i & 0xff))
+				return 0;
+
+		for (i = 0; i < bcount; i++)
+			writeb(~i, bp + i);
+		for (i = 0; i < bcount; i++)
+			if (readb(bp + i) != (~i & 0xff))
+				return 0;
+
+		/* next do 16-bit tests */
+		for (i = 0; i < wcount; i++)
+			writew(0x55AA, dp + i);
+		for (i = 0; i < wcount; i++)
+			if (readw(dp + i) != 0x55AA)
+				return 0;
+
+		for (i = 0; i < wcount; i++)
+			writew(0xAA55, dp + i);
+		for (i = 0; i < wcount; i++)
+			if (readw(dp + i) != 0xAA55)
+				return 0;
+
+		for (i = 0; i < wcount; i++)
+			writew(page, dp + i);
+	}
+
+	return page;
+}
+
+
+
+static void n2_destroy_card(card_t *card)
+{
+	int cnt;
+
+	for (cnt=0; cnt<2; cnt++)
+		if (card->ports[cnt].card)
+			unregister_hdlc_device(&card->ports[cnt].hdlc);
+
+	if (card->irq)
+		free_irq(card->irq, card);
+
+	if (card->io)
+		release_region(card->io, N2_IOPORTS);
+	kfree(card);
+}
+
+
+
+static int n2_run(unsigned long io, unsigned long irq, unsigned long winbase,
+		  long valid0, long valid1)
+{
+	card_t *card;
+	u8 cnt, pcr;
+
+	if (io<0x200 || io>0x3FF || (io % N2_IOPORTS)!=0) {
+		printk(KERN_ERR "n2: invalid I/O port value\n");
+		return -ENODEV;
+	}
+
+	if (irq<3 || irq>15 || irq == 6) /* FIXME */ {
+		printk(KERN_ERR "n2: invalid IRQ value\n");
+		return -ENODEV;
+	}
+    
+	if (winbase<0xA0000 || winbase>0xFFFFF || (winbase&0xFFF)!=0) {
+		printk(KERN_ERR "n2: invalid RAM value\n");
+		return -ENODEV;
+	}
+
+	if (check_region(io, N2_IOPORTS)) {
+		printk(KERN_ERR "n2: I/O port region in use\n");
+		return -EBUSY;
+	}
+
+	card=kmalloc(sizeof(card_t), GFP_KERNEL);
+	if (card==NULL) {
+		printk(KERN_ERR "n2: unable to allocate memory\n");
+		return -ENOBUFS;
+	}
+	memset(card, 0, sizeof(card_t));
+
+	request_region(io, N2_IOPORTS, devname);
+	card->io=io;
+
+	if (request_irq(irq, &sca_intr, 0, devname, card)) {
+		printk(KERN_ERR "n2: could not allocate IRQ\n");
+		n2_destroy_card(card);
+		return(-EBUSY);
+	}
+	card->irq=irq;
+
+	card->winbase=(u8*)winbase;
+
+	outb(0, io+N2_PCR);
+	outb(winbase>>12, io+N2_BAR);
+
+	switch (USE_WINDOWSIZE) {
+	case 16384:
+		outb(WIN16K, io+N2_PSR);
+		break;
+
+	case 32768:
+		outb(WIN32K, io+N2_PSR);
+		break;
+
+	case 65536:
+		outb(WIN64K, io+N2_PSR);
+		break;
+
+	default:
+		printk(KERN_ERR "n2: invalid window size\n");
+		n2_destroy_card(card);
+		return -ENODEV;
+	}
+
+	pcr = PCR_ENWIN | PCR_VPM | (USE_BUS16BITS ? PCR_BUS16 : 0);
+	outb(pcr, io+N2_PCR);
+
+	cnt = n2_count_page(card);
+	if (!cnt) {
+		printk(KERN_ERR "n2: memory test failed.\n");
+		n2_destroy_card(card);
+		return -EIO;
+	}
+
+	card->ram_size=cnt*USE_WINDOWSIZE;
+
+	/* 4 rings required for 2 ports, 2 rings for one port */
+	card->ring_buffers = card->ram_size /
+		((valid0 + valid1) * 2 * (sizeof(pkt_desc)+HDLC_MAX_MTU));
+
+	card->buff_offset = (valid0 + valid1) * 2 * (sizeof(pkt_desc))
+		* card->ring_buffers;
+
+	printk(KERN_DEBUG "n2: RISCom/N2 %u KB RAM, IRQ%u, "
+	       "using %u packets rings\n", card->ram_size/1024, card->irq,
+	       card->ring_buffers);
+
+	pcr |= PCR_RUNSCA;		/* run SCA */
+	outb(pcr, io+N2_PCR);
+	outb(0, io+N2_MCR);
+
+	sca_init(card, 0);
+	for (cnt=0; cnt<2; cnt++) {
+		port_t *port = &card->ports[cnt];
+
+		if ((cnt == 0 && !valid0) || (cnt == 1 && !valid1))
+			continue;
+
+		port->phy_node = cnt;
+		port->valid = 1;
+
+		if ((cnt == 1) && valid0)
+			port->log_node = 1;
+
+		hdlc_to_dev(&port->hdlc)->irq=irq;
+		hdlc_to_dev(&port->hdlc)->mem_start = winbase;
+		hdlc_to_dev(&port->hdlc)->mem_end = winbase + USE_WINDOWSIZE-1;
+		hdlc_to_dev(&port->hdlc)->tx_queue_len=50;
+		port->hdlc.ioctl=sca_ioctl;
+		port->hdlc.open=sca_open;
+		port->hdlc.close=sca_close;
+		hdlc_to_dev(&port->hdlc)->hard_start_xmit=sca_xmit;
+
+		if (register_hdlc_device(&port->hdlc)) {
+			printk(KERN_WARNING "n2: unable to register hdlc "
+			       "device\n");
+			n2_destroy_card(card);
+			return -ENOBUFS;
+		}
+		port->card = card;
+		sca_init_sync_port(port); /* Set up SCA memory */
+
+		printk(KERN_INFO "%s: RISCom/N2 node %d\n", port->hdlc.name,
+		       port->phy_node);
+	}
+
+	*new_card=card;
+	new_card=&card->next_card;
+
+	return 0;
+}
+
+
+
+void n2_init(void)
+{
+	if (hw==NULL)
+		return;
+
+	printk(KERN_INFO "%s\n", version);
+
+	do {
+		unsigned long io, irq, ram;
+		long valid[2] = { 0, 0 }; /* Default = both ports disabled */
+
+		io=simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		irq=simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		ram=simple_strtoul(hw, &hw, 0);
+
+		if (*hw++ != ',')
+			break;
+		while(1) {
+			if (*hw=='0' && !valid[0])
+				valid[0]=1; /* Port 0 enabled */
+			else if (*hw=='1' && !valid[1])
+				valid[1]=1; /* Port 1 enabled */
+			else
+				break;
+			hw++;
+		}
+      
+		if (!valid[0] && !valid[1])
+			break;	/* at least one port must be used */
+
+		if (*hw == ':' || *hw == '\x0')
+			n2_run(io, irq, ram, valid[0], valid[1]);
+
+		if (*hw == '\x0')
+			return;
+	}while(*hw++ == ':');
+
+	printk(KERN_ERR "n2: invalid hardware parameters\n");
+}
+
+
+#ifndef MODULE
+
+void n2_setup(char *str, int *ints)
+{
+	hw=str;
+}
+
+#else
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("RISCom/N2 serial port driver");
+MODULE_PARM(hw, "s");		/* hw=io,irq,ram,ports:io,irq,... */
+EXPORT_NO_SYMBOLS;
+
+int init_module(void)
+{
+	if (hw==NULL) {
+		printk(KERN_ERR "n2: no card initialized\n");
+		return -ENOSYS;	/* no parameters specified, abort */
+	}
+
+	n2_init();
+	return first_card ? 0 : -ENOSYS;
+}
+
+
+
+void cleanup_module(void)
+{
+	card_t *card=first_card;
+
+	while (card) {
+		card_t *ptr=card;
+		card=card->next_card;
+		n2_destroy_card(ptr);
+	}
+}
+
+#endif /* MODULE */

FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)