patch-2.2.18 linux/drivers/usb/mdc800.c

Next file: linux/drivers/usb/microtek.c
Previous file: linux/drivers/usb/maps/usb.map
Back to the patch index
Back to the overall index

diff -u --new-file --recursive --exclude-from /usr/src/exclude v2.2.17/drivers/usb/mdc800.c linux/drivers/usb/mdc800.c
@@ -0,0 +1,938 @@
+/*
+ * copyright (C) 1999/2000 by Henning Zabel <henning@uni-paderborn.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+/*
+ *	USB-Kernel Driver for the Mustek MDC800 Digital Camera
+ *	(c) 1999/2000 Henning Zabel <henning@uni-paderborn.de>
+ *
+ *
+ *	The driver brings the USB functions of the MDC800 to Linux.
+ * To use the Camera you must support the USB Protocoll of the camera
+ * to the Kernel Node.
+ * The Driver uses a misc device Node. Create it with :
+ * mknod /dev/mustek c 180 32
+ *
+ * The driver supports only one camera.
+ *
+ * version 0.7.3
+ * bugfix : The mdc800->state field gets set to READY after the
+ * the diconnect function sets it to NOT_CONNECTED. This makes the
+ * driver running like the camera is connected and causes some
+ * hang ups.
+ *
+ * version 0.7.1
+ * MOD_INC and MOD_DEC are changed in usb_probe to prevent load/unload
+ * problems when compiled as Module.
+ * (04/04/2000)
+ *
+ * The mdc800 driver gets assigned the USB Minor 32-47. The Registration
+ * was updated to use these values.
+ * (26/03/2000)
+ *
+ * The Init und Exit Module Function are updated.
+ * (01/03/2000)
+ *
+ * version 0.7.0
+ * Rewrite of the driver : The driver now uses URB's. The old stuff
+ * has been removed.
+ *
+ * version 0.6.0
+ * Rewrite of this driver: The Emulation of the rs232 protocoll
+ * has been removed from the driver. A special executeCommand function
+ * for this driver is included to gphoto.
+ * The driver supports two kind of communication to bulk endpoints.
+ * Either with the dev->bus->ops->bulk... or with callback function.
+ * (09/11/1999)
+ *
+ * version 0.5.0:
+ *	first Version that gets a version number. Most of the needed
+ * functions work.
+ * (20/10/1999)
+ */
+
+#include <linux/version.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/random.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/malloc.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+
+#include <linux/usb.h>
+
+#define VERSION 	"0.7.3"
+#define RELEASE_DATE 	"(24/04/2000)"
+
+/* Vendor and Product Information */
+#define MDC800_VENDOR_ID 	0x055f
+#define MDC800_PRODUCT_ID	0xa800
+
+/* Timeouts (msec) */
+#define TO_DOWNLOAD_GET_READY		1500
+#define TO_DOWNLOAD_GET_BUSY		1500
+#define TO_WRITE_GET_READY		1000
+#define TO_DEFAULT_COMMAND		5000
+#define TO_READ_FROM_IRQ 		TO_DEFAULT_COMMAND
+#define TO_GET_READY			TO_DEFAULT_COMMAND
+
+/* Minor Number of the device (create with mknod /dev/mustek c 180 32) */
+#define MDC800_DEVICE_MINOR_BASE 32
+
+
+/**************************************************************************
+	Data and structs
+***************************************************************************/
+
+
+typedef enum {
+	NOT_CONNECTED, READY, WORKING, DOWNLOAD
+} mdc800_state;
+
+
+/* Data for the driver */
+struct mdc800_data
+{
+	struct usb_device *	dev;			// Device Data
+	mdc800_state 		state;
+
+	unsigned int		endpoint [4];
+
+	purb_t			irq_urb;
+	wait_queue_head_t	irq_wait;
+	char*			irq_urb_buffer;
+
+	int			camera_busy;          // is camera busy ?
+	int 			camera_request_ready; // Status to synchronize with irq
+	char 			camera_response [8];	 // last Bytes send after busy
+
+	purb_t   		write_urb;
+	char*			write_urb_buffer;
+	wait_queue_head_t	write_wait;
+
+
+	purb_t	   		download_urb;
+	char*			download_urb_buffer;
+	wait_queue_head_t	download_wait;
+	int			download_left;		// Bytes left to download ?
+
+
+	/* Device Data */
+	char			out [64];	// Answer Buffer
+	int 			out_ptr;		// Index to the first not readen byte
+	int			out_count;	// Bytes in the buffer
+
+	int			open;			// Camera device open ?
+	int			rw_lock;		// Block read <-> write
+
+	char 			in [8];			// Command Input Buffer
+	int  			in_count;
+
+	int			pic_index;		// Cache for the Imagesize (-1 for nothing cached )
+	int			pic_len;
+};
+
+
+/* Specification of the Endpoints */
+static struct usb_endpoint_descriptor mdc800_ed [4] =
+{
+	{ 0,0, 0x01, 0x02,  8, 0,0,0 },
+	{ 0,0, 0x82, 0x03,  8, 0,0,0 },
+	{ 0,0, 0x03, 0x02, 64, 0,0,0 },
+	{ 0,0, 0x84, 0x02, 64, 0,0,0 }
+};
+
+
+/* The Variable used by the driver */
+static struct mdc800_data* mdc800=0;
+
+
+/***************************************************************************
+	The USB Part of the driver
+****************************************************************************/
+
+static int mdc800_endpoint_equals (struct usb_endpoint_descriptor *a,struct usb_endpoint_descriptor *b)
+{
+	return (
+		   ( a->bEndpointAddress == b->bEndpointAddress )
+		&& ( a->bmAttributes     == b->bmAttributes     )
+		&& ( a->wMaxPacketSize   == b->wMaxPacketSize   )
+	);
+}
+
+
+/*
+ * Checks wether the camera responds busy
+ */
+static int mdc800_isBusy (char* ch)
+{
+	int i=0;
+	while (i<8)
+	{
+		if (ch [i] != (char)0x99)
+			return 0;
+		i++;
+	}
+	return 1;
+}
+
+
+/*
+ * Checks wether the Camera is ready
+ */
+static int mdc800_isReady (char *ch)
+{
+	int i=0;
+	while (i<8)
+	{
+		if (ch [i] != (char)0xbb)
+			return 0;
+		i++;
+	}
+	return 1;
+}
+
+
+
+/*
+ * USB IRQ Handler for InputLine
+ */
+static void mdc800_usb_irq (struct urb *urb)
+{
+	int data_received=0, wake_up;
+	unsigned char* b=urb->transfer_buffer;
+	struct mdc800_data* mdc800=urb->context;
+
+	if (urb->status >= 0)
+	{
+
+		//dbg ("%i %i %i %i %i %i %i %i \n",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
+
+		if (mdc800_isBusy (b))
+		{
+			if (!mdc800->camera_busy)
+			{
+				mdc800->camera_busy=1;
+				dbg ("gets busy");
+			}
+		}
+		else
+		{
+			if (mdc800->camera_busy && mdc800_isReady (b))
+			{
+				mdc800->camera_busy=0;
+				dbg ("gets ready");
+			}
+		}
+		if (!(mdc800_isBusy (b) || mdc800_isReady (b)))
+		{
+			/* Store Data in camera_answer field */
+			dbg ("%i %i %i %i %i %i %i %i ",b[0],b[1],b[2],b[3],b[4],b[5],b[6],b[7]);
+
+			memcpy (mdc800->camera_response,b,8);
+			data_received=1;
+		}
+	}
+	wake_up= ( mdc800->camera_request_ready > 0 )
+				&&
+				(
+					((mdc800->camera_request_ready == 1) && (!mdc800->camera_busy))
+				||
+					((mdc800->camera_request_ready == 2) && data_received)
+				||
+					((mdc800->camera_request_ready == 3) && (mdc800->camera_busy))
+				||
+					(urb->status < 0)
+				);
+
+	if (wake_up)
+	{
+		mdc800->camera_request_ready=0;
+		wake_up_interruptible (&mdc800->irq_wait);
+	}
+}
+
+
+/*
+ * Waits a while until the irq responds that camera is ready
+ *
+ *  mode : 0: Wait for camera gets ready
+ *         1: Wait for receiving data
+ *         2: Wait for camera gets busy
+ *
+ * msec: Time to wait
+ */
+static int mdc800_usb_waitForIRQ (int mode, int msec)
+{
+	mdc800->camera_request_ready=1+mode;
+
+	interruptible_sleep_on_timeout (&mdc800->irq_wait, msec*HZ/1000);
+
+	if (mdc800->camera_request_ready>0)
+	{
+		mdc800->camera_request_ready=0;
+		err ("timeout waiting for camera.");
+		return -1;
+	}
+	
+	if (mdc800->state == NOT_CONNECTED)
+	{
+		warn ("Camera gets disconnected during waiting for irq.");
+		mdc800->camera_request_ready=0;
+		return -2;
+	}
+	
+	return 0;
+}
+
+
+/*
+ * The write_urb callback function
+ */
+static void mdc800_usb_write_notify (struct urb *urb)
+{
+	struct mdc800_data* mdc800=urb->context;
+
+	if (urb->status != 0)
+	{
+		err ("writing command fails (status=%i)", urb->status);
+	}
+	else
+	{	
+		mdc800->state=READY;
+	}
+	wake_up_interruptible (&mdc800->write_wait);
+}
+
+
+/*
+ * The download_urb callback function
+ */
+static void mdc800_usb_download_notify (struct urb *urb)
+{
+	struct mdc800_data* mdc800=urb->context;
+
+	if (urb->status == 0)
+	{
+		/* Fill output buffer with these data */
+		memcpy (mdc800->out,  urb->transfer_buffer, 64);
+		mdc800->out_count=64;
+		mdc800->out_ptr=0;
+		mdc800->download_left-=64;
+		if (mdc800->download_left == 0)
+		{
+			mdc800->state=READY;
+		}
+	}
+	else
+	{
+		err ("request bytes fails (status:%i)", urb->status);
+	}
+	wake_up_interruptible (&mdc800->download_wait);
+}
+
+
+/***************************************************************************
+	Probing for the Camera
+ ***************************************************************************/
+
+static struct usb_driver mdc800_usb_driver;
+
+/*
+ * Callback to search the Mustek MDC800 on the USB Bus
+ */
+static void* mdc800_usb_probe (struct usb_device *dev ,unsigned int ifnum )
+{
+	int 										i,j;
+	struct usb_interface_descriptor	*intf_desc;
+	int irq_interval=0;
+
+	dbg ("(mdc800_usb_probe) called.");
+
+
+	if (dev->descriptor.idVendor != MDC800_VENDOR_ID)
+		return 0;
+	if (dev->descriptor.idProduct != MDC800_PRODUCT_ID)
+		return 0;
+
+	if (mdc800->dev != 0)
+	{
+		warn ("only one Mustek MDC800 is supported.");
+		return 0;
+	}
+
+	if (dev->descriptor.bNumConfigurations != 1)
+	{
+		err ("probe fails -> wrong Number of Configuration");
+		return 0;
+	}
+	intf_desc=&dev->actconfig->interface[ifnum].altsetting[0];
+
+	if (
+			( intf_desc->bInterfaceClass != 0xff )
+		||	( intf_desc->bInterfaceSubClass != 0 )
+		|| ( intf_desc->bInterfaceProtocol != 0 )
+		|| ( intf_desc->bNumEndpoints != 4)
+	)
+	{
+		err ("probe fails -> wrong Interface");
+		return 0;
+	}
+
+	/* Check the Endpoints */
+	for (i=0; i<4; i++)
+	{
+		mdc800->endpoint[i]=-1;
+		for (j=0; j<4; j++)
+		{
+			if (mdc800_endpoint_equals (&intf_desc->endpoint [j],&mdc800_ed [i]))
+			{
+				mdc800->endpoint[i]=intf_desc->endpoint [j].bEndpointAddress ;
+				if (i==1)
+				{
+					irq_interval=intf_desc->endpoint [j].bInterval;
+				}
+
+				continue;
+			}
+		}
+		if (mdc800->endpoint[i] == -1)
+		{
+			err ("probe fails -> Wrong Endpoints.");
+			return 0;
+		}
+	}
+
+
+	usb_driver_claim_interface (&mdc800_usb_driver, &dev->actconfig->interface[ifnum], mdc800);
+	if (usb_set_interface (dev, ifnum, 0) < 0)
+	{
+		err ("MDC800 Configuration fails.");
+		return 0;
+	}
+
+	info ("Found Mustek MDC800 on USB.");
+
+	mdc800->dev=dev;
+	mdc800->state=READY;
+	mdc800->open=0;
+	mdc800->rw_lock=0;
+
+	/* Setup URB Structs */
+	FILL_INT_URB (
+		mdc800->irq_urb,
+		mdc800->dev,
+		usb_rcvintpipe (mdc800->dev,mdc800->endpoint [1]),
+		mdc800->irq_urb_buffer,
+		8,
+		mdc800_usb_irq,
+		mdc800,
+		irq_interval
+	);
+
+	FILL_BULK_URB (
+		mdc800->write_urb,
+		mdc800->dev,
+		usb_sndbulkpipe (mdc800->dev, mdc800->endpoint[0]),
+		mdc800->write_urb_buffer,
+		8,
+		mdc800_usb_write_notify,
+		mdc800
+	);
+
+	FILL_BULK_URB (
+		mdc800->download_urb,
+		mdc800->dev,
+		usb_rcvbulkpipe (mdc800->dev, mdc800->endpoint [3]),
+		mdc800->download_urb_buffer,
+		64,
+		mdc800_usb_download_notify,
+		mdc800
+	);
+
+	return mdc800;
+}
+
+
+/*
+ * Disconnect USB device (maybe the MDC800)
+ */
+static void mdc800_usb_disconnect (struct usb_device *dev,void* ptr)
+{
+	struct mdc800_data* mdc800=(struct mdc800_data*) ptr;
+
+	dbg ("(mdc800_usb_disconnect) called");
+
+	if (mdc800->state == NOT_CONNECTED)
+		return;
+	
+	mdc800->state=NOT_CONNECTED;
+
+	usb_unlink_urb (mdc800->irq_urb);
+	usb_unlink_urb (mdc800->write_urb);
+	usb_unlink_urb (mdc800->download_urb);
+
+	usb_driver_release_interface (&mdc800_usb_driver, &dev->actconfig->interface[1]);
+
+	mdc800->dev=0;
+	info ("Mustek MDC800 disconnected from USB.");
+}
+
+
+/***************************************************************************
+	The Misc device Part (file_operations)
+****************************************************************************/
+
+/*
+ * This Function calc the Answersize for a command.
+ */
+static int mdc800_getAnswerSize (char command)
+{
+	switch ((unsigned char) command)
+	{
+		case 0x2a:
+		case 0x49:
+		case 0x51:
+		case 0x0d:
+		case 0x20:
+		case 0x07:
+		case 0x01:
+		case 0x25:
+		case 0x00:
+			return 8;
+
+		case 0x05:
+		case 0x3e:
+			return mdc800->pic_len;
+
+		case 0x09:
+			return 4096;
+
+		default:
+			return 0;
+	}
+}
+
+
+/*
+ * Init the device: (1) alloc mem (2) Increase MOD Count ..
+ */
+static int mdc800_device_open (struct inode* inode, struct file *file)
+{
+	int retval=0;
+	
+	if (mdc800->state == NOT_CONNECTED)
+	{
+		return -EBUSY;
+	}
+
+	if (mdc800->open)
+	{
+		return -EBUSY;
+	}
+
+	mdc800->rw_lock=0;
+	mdc800->in_count=0;
+	mdc800->out_count=0;
+	mdc800->out_ptr=0;
+	mdc800->pic_index=0;
+	mdc800->pic_len=-1;
+	mdc800->download_left=0;
+
+	mdc800->camera_busy=0;
+	mdc800->camera_request_ready=0;
+
+	retval=0;
+	if (usb_submit_urb (mdc800->irq_urb))
+	{
+		err ("request USB irq fails (submit_retval=%i urb_status=%i).",retval, mdc800->irq_urb->status);
+		return -EIO;
+	}
+
+	mdc800->open=1;
+
+	dbg ("Mustek MDC800 device opened.");
+	return 0;
+}
+
+
+/*
+ * Close the Camera and release Memory
+ */
+static int mdc800_device_release (struct inode* inode, struct file *file)
+{
+	int retval=0;
+	dbg ("Mustek MDC800 device closed.");
+
+	lock_kernel();
+	if (mdc800->open && (mdc800->state != NOT_CONNECTED))
+	{
+		mdc800->open=0;
+		usb_unlink_urb (mdc800->irq_urb);
+		usb_unlink_urb (mdc800->write_urb);
+		usb_unlink_urb (mdc800->download_urb);
+	}
+	else
+	{
+		retval=-EIO;
+	}
+	unlock_kernel();
+
+	return retval;
+}
+
+
+/*
+ * The Device read callback Function
+ */
+static ssize_t mdc800_device_read (struct file *file, char *buf, size_t len, loff_t *pos)
+{
+	int   left=len, sts=len; /* single transfer size */
+	char* ptr=buf;
+
+	if (mdc800->state == NOT_CONNECTED)
+		return -EBUSY;
+
+	if (mdc800->state == WORKING)
+	{
+		warn ("Illegal State \"working\" reached during read ?!");
+		return -EBUSY;
+	}
+
+	if (!mdc800->open || mdc800->rw_lock)
+		return -EBUSY;
+	mdc800->rw_lock=1;
+
+	while (left)
+	{
+		if (signal_pending (current)) {
+			mdc800->rw_lock=0;
+			return -EINTR;
+		}
+
+		sts=left > (mdc800->out_count-mdc800->out_ptr)?mdc800->out_count-mdc800->out_ptr:left;
+
+		if (sts <= 0)
+		{
+			/* Too less Data in buffer */
+			if (mdc800->state == DOWNLOAD)
+			{
+				mdc800->out_count=0;
+				mdc800->out_ptr=0;
+
+				/* Download -> Request new bytes */
+				if (usb_submit_urb (mdc800->download_urb))
+				{
+					err ("Can't submit download urb (status=%i)",mdc800->download_urb->status);
+					mdc800->rw_lock=0;
+					return len-left;
+				}
+				interruptible_sleep_on_timeout (&mdc800->download_wait, TO_DOWNLOAD_GET_READY*HZ/1000);
+				if (mdc800->download_urb->status != 0)
+				{
+					err ("request download-bytes fails (status=%i)",mdc800->download_urb->status);
+					mdc800->rw_lock=0;
+					return len-left;
+				}
+			}
+			else
+			{
+				/* No more bytes -> that's an error*/
+				mdc800->rw_lock=0;
+				return -EIO;
+			}
+		}
+		else
+		{
+			/* memcpy Bytes */
+			memcpy (ptr, &mdc800->out [mdc800->out_ptr], sts);
+			ptr+=sts;
+			left-=sts;
+			mdc800->out_ptr+=sts;
+		}
+	}
+
+	mdc800->rw_lock=0;
+	return len-left;
+}
+
+
+/*
+ * The Device write callback Function
+ * If a 8Byte Command is received, it will be send to the camera.
+ * After this the driver initiates the request for the answer or
+ * just waits until the camera becomes ready.
+ */
+static ssize_t mdc800_device_write (struct file *file, const char *buf, size_t len, loff_t *pos)
+{
+	int i=0;
+
+	if (mdc800->state != READY)
+		return -EBUSY;
+
+	if (!mdc800->open || mdc800->rw_lock)
+		return -EBUSY;
+	mdc800->rw_lock=1;
+
+	while (i<len)
+	{
+		if (signal_pending (current)) {
+			mdc800->rw_lock=0;
+			return -EINTR;
+		}
+
+		/* check for command start */
+		if (buf [i] == (char) 0x55)
+		{
+			mdc800->in_count=0;
+			mdc800->out_count=0;
+			mdc800->out_ptr=0;
+			mdc800->download_left=0;
+		}
+
+		/* save command byte */
+		if (mdc800->in_count < 8)
+		{
+			mdc800->in[mdc800->in_count]=buf[i];
+			mdc800->in_count++;
+		}
+		else
+		{
+			err ("Command is to long !\n");
+			mdc800->rw_lock=0;
+			return -EIO;
+		}
+
+		/* Command Buffer full ? -> send it to camera */
+		if (mdc800->in_count == 8)
+		{
+			int answersize;
+
+			if (mdc800_usb_waitForIRQ (0,TO_GET_READY))
+			{
+				err ("Camera didn't get ready.\n");
+				mdc800->rw_lock=0;
+				return -EIO;
+			}
+
+			answersize=mdc800_getAnswerSize (mdc800->in[1]);
+
+			mdc800->state=WORKING;
+			memcpy (mdc800->write_urb->transfer_buffer, mdc800->in,8);
+			if (usb_submit_urb (mdc800->write_urb))
+			{
+				err ("submitting write urb fails (status=%i)", mdc800->write_urb->status);
+				mdc800->rw_lock=0;
+				return -EIO;
+			}
+			interruptible_sleep_on_timeout (&mdc800->write_wait, TO_WRITE_GET_READY*HZ/1000);
+			if (mdc800->state == WORKING)
+			{
+				usb_unlink_urb (mdc800->write_urb);
+				mdc800->rw_lock=0;
+				return -EIO;
+			}
+
+			switch ((unsigned char) mdc800->in[1])
+			{
+				case 0x05: /* Download Image */
+				case 0x3e: /* Take shot in Fine Mode (WCam Mode) */
+					if (mdc800->pic_len < 0)
+					{
+						err ("call 0x07 before 0x05,0x3e");
+						mdc800->state=READY;
+						mdc800->rw_lock=0;
+						return -EIO;
+					}
+					mdc800->pic_len=-1;
+
+				case 0x09: /* Download Thumbnail */
+					mdc800->download_left=answersize+64;
+					mdc800->state=DOWNLOAD;
+					mdc800_usb_waitForIRQ (0,TO_DOWNLOAD_GET_BUSY);
+					break;
+
+
+				default:
+					if (answersize)
+					{
+
+						if (mdc800_usb_waitForIRQ (1,TO_READ_FROM_IRQ))
+						{
+							err ("requesting answer from irq fails");
+							mdc800->rw_lock=0;
+							return -EIO;
+						}
+
+						/* Write dummy data, (this is ugly but part of the USB Protokoll */
+						/* if you use endpoint 1 as bulk and not as irq */
+						memcpy (mdc800->out, mdc800->camera_response,8);
+
+						/* This is the interpreted answer */
+						memcpy (&mdc800->out[8], mdc800->camera_response,8);
+
+						mdc800->out_ptr=0;
+						mdc800->out_count=16;
+
+						/* Cache the Imagesize, if command was getImageSize */
+						if (mdc800->in [1] == (char) 0x07)
+						{
+							mdc800->pic_len=(int) 65536*(unsigned char) mdc800->camera_response[0]+256*(unsigned char) mdc800->camera_response[1]+(unsigned char) mdc800->camera_response[2];
+
+							dbg ("cached imagesize = %i",mdc800->pic_len);
+						}
+
+					}
+					else
+					{
+						if (mdc800_usb_waitForIRQ (0,TO_DEFAULT_COMMAND))
+						{
+							err ("Command Timeout.");
+							mdc800->rw_lock=0;
+							return -EIO;
+						}
+					}
+					mdc800->state=READY;
+					break;
+			}
+		}
+		i++;
+	}
+	mdc800->rw_lock=0;
+	return i;
+}
+
+
+/***************************************************************************
+	Init and Cleanup this driver (Structs and types)
+****************************************************************************/
+
+/* File Operations of this drivers */
+static struct file_operations mdc800_device_ops =
+{
+	read:		mdc800_device_read,
+	write:		mdc800_device_write,
+	open:		mdc800_device_open,
+	release:	mdc800_device_release,
+};
+
+
+
+/*
+ * USB Driver Struct for this device
+ */
+static struct usb_driver mdc800_usb_driver =
+{
+	"mdc800",
+	mdc800_usb_probe,
+	mdc800_usb_disconnect,
+	{ 0,0 },
+	&mdc800_device_ops,
+	MDC800_DEVICE_MINOR_BASE
+};
+
+
+
+/************************************************************************
+	Init and Cleanup this driver (Main Functions)
+*************************************************************************/
+
+#define try(A)           if ((A) == 0) goto cleanup_on_fail;
+#define try_free_mem(A)  if (A != 0) { kfree (A); A=0; }
+#define try_free_urb(A)  if (A != 0) { usb_free_urb (A); A=0; }
+
+int __init usb_mdc800_init (void)
+{
+	/* Allocate Memory */
+	try (mdc800=kmalloc (sizeof (struct mdc800_data), GFP_KERNEL));
+
+	mdc800->dev=0;
+	mdc800->open=0;
+	mdc800->state=NOT_CONNECTED;
+	memset(mdc800, 0, sizeof(struct mdc800_data));
+
+	init_waitqueue_head (&mdc800->irq_wait);
+	init_waitqueue_head (&mdc800->write_wait);
+	init_waitqueue_head (&mdc800->download_wait);
+
+	try (mdc800->irq_urb_buffer=kmalloc (8, GFP_KERNEL));
+	try (mdc800->write_urb_buffer=kmalloc (8, GFP_KERNEL));
+	try (mdc800->download_urb_buffer=kmalloc (64, GFP_KERNEL));
+
+	try (mdc800->irq_urb=usb_alloc_urb (0));
+	try (mdc800->download_urb=usb_alloc_urb (0));
+	try (mdc800->write_urb=usb_alloc_urb (0));
+
+	/* Register the driver */
+	if (usb_register (&mdc800_usb_driver) < 0)
+		goto cleanup_on_fail;
+
+	info ("Mustek Digital Camera Driver " VERSION " (MDC800)");
+	info (RELEASE_DATE " Henning Zabel <henning@uni-paderborn.de>");
+
+	return 0;
+
+	/* Clean driver up, when something fails */
+
+cleanup_on_fail:
+
+	if (mdc800 != 0)
+	{
+		err ("can't alloc memory!");
+
+		try_free_mem (mdc800->download_urb_buffer);
+		try_free_mem (mdc800->write_urb_buffer);
+		try_free_mem (mdc800->irq_urb_buffer);
+
+		try_free_urb (mdc800->write_urb);
+		try_free_urb (mdc800->download_urb);
+		try_free_urb (mdc800->irq_urb);
+
+		kfree (mdc800);
+	}
+	mdc800=0;
+	return -1;
+}
+
+
+void __exit usb_mdc800_cleanup (void)
+{
+	usb_deregister (&mdc800_usb_driver);
+
+	usb_free_urb (mdc800->irq_urb);
+	usb_free_urb (mdc800->download_urb);
+	usb_free_urb (mdc800->write_urb);
+
+	kfree (mdc800->irq_urb_buffer);
+	kfree (mdc800->write_urb_buffer);
+	kfree (mdc800->download_urb_buffer);
+
+	kfree (mdc800);
+	mdc800=0;
+}
+
+
+MODULE_AUTHOR ("Henning Zabel <henning@uni-paderborn.de>");
+MODULE_DESCRIPTION ("USB Driver for Mustek MDC800 Digital Camera");
+
+module_init (usb_mdc800_init);
+module_exit (usb_mdc800_cleanup);
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)