Scientific Linux "SL 5.2" for i386 June 26, 2008 Items marked with a "*" indicate changes since 5.1 See SL.documentation for Upstream vendor release notes. Send comments/issues/test reports to scientific-linux-devel@fnal.gov -------------------------------------------------------------------------- Table of contents DOWNLOAD INFO ADDED compared to Enterprise 5.2 UPDATED compared to Enterprise 5.2 Installer/legal modifications ADDED by Upstream Vendor /contrib SRPMS HARDWARE REQUIREMENTS LIMITATIONS INFO ERRATA _____________________________________________________________________________ DOWNLOAD INFO _____________________________________________________________________________ ftp://ftp.scientificlinux.org/linux/scientific/52/i386 ftp://ftp.scientificlinux.org/linux/scientific/52/iso/i386 ----------------------------------------------------------------------------- ADDED compared to vendor ----------------------------------------------------------------------------- 915resolution-0.5.3-6.el5.i386.rpm 915resolution is a tool to modify the video BIOS of the 800 and 900 series Intel graphics chipsets. This includes the 845G, 855G, and 865G chipsets, as well as 915G, 915GM, and 945G chipsets. This modification is necessary to allow the display of certain graphics resolutions for an Xorg or XFree86 graphics server. 915resolution's modifications of the BIOS are transient. There is no risk of permanent modification of the BIOS. This also means that 915resolution must be run every time the computer boots inorder for it's changes to take effect. 915resolution is derived from the tool 855resolution. However, the i code differs substantially. 915resolution's code base is much simpler.i 915resolution also allows the modification of bits per pixel. alpine Alpine is a tool for reading, sending, and managing electronic messages. Alpine is the successor to Pine and was developed by Computing & Communications at the University of Washington. * alpine-1.10-1.i386.rpm cfitsio CFITSIO is a library of C and FORTRAN subroutines for reading and writing data files in FITS (Flexible Image Transport System) data format CFITSIO is widely used in the astronomical community. cfitsio-3.030-1.sl5.i386.rpm cfitsio-devel-3.030-1.sl5.i386.rpm *dkms * * This package contains the framework for the Dynamic * Kernel Module Support (DKMS) method for installing * module RPMS as originally developed by Dell. * * dkms-2.0.17.4-1.9.noarch.rpm dropit dropit's intended purpose is to remove directories entries from a PATH shell variable value, which has colon separated fields. dropit is usable in sh, ksh, and csh shell script files. dropit-1.2-1.i386.rpm *FUSE With FUSE it is possible to implement a fully functional filesystem in a userspace program. fuse-smb: you can seamlessly browse your network neighbourhood as if it were on your own filesystem. Only when you're accessing a share is a connection made to the remote computer. This also allows users to mount smb shares using kerberos. fuse-sshfs: A FUSE-filesystem client based on the SSH File Transfer Protocol. On the client side mounting the filesystem is as easy as logging into the server with ssh. * Updated to latest fuse-smb and fuse-sshfs fuse-2.6.3-1.SL.i386.rpm fuse-devel-2.6.3-1.SL.i386.rpm fuse-libs-2.6.3-1.SL.i386.rpm * fuse-smb-0.8.7-1.SL.i386.rpm * fuse-sshfs-2.0-1.SL.i386.rpm * kernel-module-fuse-2.6.18-92.1.6.el5-2.6.3-1.sl5.i686.rpm * kernel-module-fuse-2.6.18-92.1.6.el5PAE-2.6.3-1.sl5.i686.rpm * kernel-module-fuse-2.6.18-92.1.6.el5xen-2.6.3-1.sl5.i686.rpm *Graphviz Graph Visualization Tools * Updated to latest release * * graphviz-2.18-3.sl.i386.rpm * graphviz-devel-2.18-3.sl.i386.rpm * graphviz-doc-2.18-3.sl.i386.rpm * graphviz-graphs-2.18-3.sl.i386.rpm * graphviz-guile-2.18-3.sl.i386.rpm * graphviz-java-2.18-3.sl.i386.rpm * graphviz-lua-2.18-3.sl.i386.rpm * graphviz-ocaml-2.18-3.sl.i386.rpm * graphviz-perl-2.18-3.sl.i386.rpm * graphviz-php-2.18-3.sl.i386.rpm * graphviz-python-2.18-3.sl.i386.rpm * graphviz-ruby-2.18-3.sl.i386.rpm * graphviz-tcl-2.18-3.sl.i386.rpm *icewm A lightweight window manager for the X Window System. * Updated to the latest version * icewm-1.2.35-1.i386.rpm * icewm-l10n-1.2.35-1.i386.rpm Intel wireless firmware Firmware for the Intel® PRO/Wireless 2100 and 2200 Driver. Please read the license that comes in the rpm carefully. ipw2200-firmware-3.0 includes version 2.2, 2.3, 2.4, and 3.0 ipw2100-firmware-1.3-5.noarch.rpm ipw2200-firmware-3.0-1.noarch.rpm ipw3945d is needed to control the ipw3945 wireless card * ipw3945d is now turned on by default. The startup script * looks for the ipw3945 hardware, and if it finds it * it starts up the ipw3945 deamon. kernel-module-ipw3945 is needed because this driver is not in the standard kernel. This driver is known to work on the Dell 820 and Dell 620. It is known to NOT work on the FJS S7110 (Fujitsu). ipw3945-1.2.0-2.sl5.i686.rpm * ipw3945d-1.7.22-11.sl5.i386.rpm ipw3945-firmware-1.14.2-1.sl5.noarch.rpm * kernel-module-ipw3945-2.6.18-92.1.6.el5-1.2.0-2.sl5.i686.rpm * kernel-module-ipw3945-2.6.18-92.1.6.el5PAE-1.2.0-2.sl5.i686.rpm * kernel-module-ipw3945-2.6.18-92.1.6.el5xen-1.2.0-2.sl5.i686.rpm The file iwlwifi-4965.ucode is required to be present on your system in order for the Intel Wireless WiFi Link 4965AGN driver for Linux (iwlwifi) to be able to operate on your system. iwlwifi-4965-ucode-4.44.17-5.sl5.noarch.rpm *JAVA * java-1.5.0-sun-compat-1.5.0.15-1jpp.noarch.rpm * jdk-1.5.0_15-fcs.i586.rpm This packages is the java sdk from sun. It's license is found at SL.documentation/jdk-1.5.x.license To have all of it's links (including plugins) setup correctly you should also install java-1.5.0-sun-compat So the easiest thing to do is yum install java-1.5.0-sun-compat as it will automatically pull in the current j2sdk-1.5.0 rpm. java-1.5.0-sun-compat-1.5.0.15-1jpp.noarch.rpm This package provides JPackage compatibility symlinks and directories for Sun's JDK rpm. *kdeedu * * Educational/Edutainment applications for KDE * kstars is part of this package * * kdeedu-3.5.4-1.el5.i386.rpm * kdeedu-devel-3.5.4-1.el5.i386.rpm madwifi Support for Atheros G wireless madfifi is the Multiband Atheros Driver for WiFi, a linux device driver for 802.11a/b/g universal NIC cards - either Cardbus, PCI or MiniPCI - that use Atheros chipsets (ar5210, ar5211, ar5212). * madwifi-0.9.4-15.i686.rpm * kernel-module-madwifi-2.6.18-92.1.6.el5-0.9.4-15.sl5.i686.rpm * kernel-module-madwifi-2.6.18-92.1.6.el5PAE-0.9.4-15.sl5.i686.rpm * kernel-module-madwifi-2.6.18-92.1.6.el5xen-0.9.4-15.sl5.i686.rpm * kernel-module-madwifi-hal-2.6.18-92.1.6.el5-0.9.4-15.sl5.i686.rpm * kernel-module-madwifi-hal-2.6.18-92.1.6.el5PAE-0.9.4-15.sl5.i686.rpm * kernel-module-madwifi-hal-2.6.18-92.1.6.el5xen-0.9.4-15.sl5.i686.rpm Multimedia gstreamer-plugins-extras-0.10.9-2.sl.i386.rpm from SL4 (updated tarball) k3b-extras-0.12.17-3.sl.i386.rpm from livna Repository These are dependencies of the above rpms. lame-3.97-1.sl.i386.rpm from RPMforge lame-devel-3.97-1.sl.i386.rpm from RPMforge libid3tag-0.15.1b-3.sl.i386.rpm from RPMforge libid3tag-devel-0.15.1b-3.sl.i386.rpm from RPMforge libmad-0.15.1b-4.sl.i386.rpm from RPMforge libmad-devel-0.15.1b-4.sl.i386.rpm from RPMforge taglib-1.4-1.2.sl.i386.rpm from RPMforge taglib-devel-1.4-1.2.sl.i386.rpm from RPMforge *ndiswrapper The ndiswrapper project makes it possible to use WLAN-Hardware with Linux by means of a loadable kernel module that "wraps around" NDIS (Windows network driver API) drivers. These rpms contain just the kernel module and loader. You will also need the Windows driver for your card. WARNING: Scientific Linux-Kernels use 4K size stack. Many Windows drivers will need at least 8K size stacks. For details read the wiki on: http:/ndiswrapper.sourceforge.net * Updated to the latest version * ndiswrapper-1.53-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.18-92.1.6.el5-1.53-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.18-92.1.6.el5PAE-1.53-1.SL.i686.rpm * kernel-module-ndiswrapper-2.6.18-92.1.6.el5xen-1.53-1.SL.i686.rpm nedit NEdit is a GUI text editor for the X Window System and Motif. nedit-5.5-10.el5.i386.rpm NumPy http://numpy.scipy.org// NumPy derives from the old Numeric code base and can be used as a replacement for Numeric. It also adds the features introduced by Numarray and can also be used to replace Numarray. This package contains: - a powerful N-dimensional array object - sophisticated (broadcasting) functions - basic linear algebra functions - basic Fourier transforms - sophisticated random number capabilities - tools for integrating Fortran code. numpy-1.0.4-1.i386.rpm *OpenAFS * We have put in the latest 1.4.7 release of openafs * openafs-1.4.7-68.SL5.i686.rpm * openafs-authlibs-1.4.7-68.SL5.i686.rpm * openafs-authlibs-devel-1.4.7-68.SL5.i686.rpm * openafs-client-1.4.7-68.SL5.i686.rpm * openafs-compat-1.4.7-68.SL5.i686.rpm * openafs-debug-1.4.7-68.SL5.i686.rpm * openafs-devel-1.4.7-68.SL5.i686.rpm * openafs-kernel-source-1.4.7-68.SL5.i686.rpm * openafs-kpasswd-1.4.7-68.SL5.i686.rpm * openafs-krb5-1.4.7-68.SL5.i686.rpm * openafs-server-1.4.7-68.SL5.i686.rpm * gfs-utils-0.1.12-1.el5_1.1.i386.rpm openafs-firstboot-1.4-1.SL.noarch.rpm * kernel-module-openafs-2.6.18-92.1.6.el5-1.4.7-68.SL5.i686.rpm * kernel-module-openafs-2.6.18-92.1.6.el5PAE-1.4.7-68.SL5.i686.rpm * kernel-module-openafs-2.6.18-92.1.6.el5xen-1.4.7-68.SL5.i686.rpm These perl modules have been added as they are useful. They came from CERN perl-MailTools-1.62-1.noarch.rpm perl-Parse-RecDescent-1.94-1.noarch.rpm perl-SQL-Statement-1.06-1.noarch.rpm perl-TermReadKey-2.20-12.i386.rpm perl-Text-CSV_XS-0.23-1.i386.rpm perl-Text-Template-1.44-1.noarch.rpm perl-Tk-804.027-1.i386.rpm perl-TimeDate has been added to the release by The Upstream Vendor We decided to use TUV's version of perl-TimeDate *R http://www.r-project.org/ R is a language and environment for statistical computing and graphics. R is a GNU project which is similar to the S language and environment which was developed at Bell Laboratories by John Chambers and colleagues. R can be considered as a different implementation of S. There are some important differences, but much code written for S runs unaltered under R. * Latest version * R-2.7.0-1.sl5.i386.rpm * R-devel-2.7.0-1.sl5.i386.rpm * libRmath-2.7.0-1.sl5.i386.rpm * libRmath-devel-2.7.0-1.sl5.i386.rpm *r1000 * * The r1000 driver is now the r8169 driver, now in the SL 5.2 kernel. * Because it is now in the kernel, we have removed the r1000 packages. SL_afs_no_dynroot-2.0-2.noarch.rpm This package removes the -dynroot option from the openafs config Restarting of afs is needed for this to take effect. This rpm does not restart afs SL_desktop_tweaks-5-4.noarch.rpm This adds a terminal icon to the kicker panel for both KDE and GNOME. This also changed the KDE startup background from red to black Installed by default for both KDE and GNOME. SL_enable_serialconsole-3.1-6.noarch.rpm This script makes all the changes necessary to send console output to both the serial port and the screen. This also creates a login prompt on the serial port and allows users to login at this prompt. SL_no_colorls-1.0-3.noarch.rpm Turns off "color" of ls. Not installed by default. SL_password_for_singleuser-1.0-1.noarch.rpm Changes /etc/inittab to require the root password for single user mode. Not installed by default. This used to be SL_inittab_change *SL_rpm_show_arch-1.0-2.noarch.rpm Adds arch to "rpm -qa" listing. * Now umask friendly SL_sendmail_accept-1.1-3.noarch.rpm Changes Sendmail config so that it allows incomming mail. Not installed by default. tidy When editing HTML it's easy to make mistakes. Wouldn't it be nice if there was a simple way to fix these mistakes automatically and tidy up sloppy editing into nicely layed out markup? Well now there is! Dave Raggett's HTML TIDY is a free utility for doing just that. It also works great on the atrociously hard to read markup generated by specialized HTML editors and conversion tools, and can help you identify where you need to pay further attention on making your pages more accessible to people with disabilities. tidy-0.99.0-12.20070228.sl5.i386.rpm libtidy-0.99.0-12.20070228.sl5.i386.rpm libtidy-devel-0.99.0-12.20070228.sl5.i386.rpm *XFS * XFS is a highly scalable, high-performance journaling filesystem * that provides rapid recovery from system crashes. * * xfs-0.4-1.el5.i686.rpm * xfsdump-2.2.46-1.sl5.i386.rpm * xfsprogs-2.9.4-1.sl5.i386.rpm * xfsprogs-devel-2.9.4-1.sl5.i386.rpm * dmapi-2.2.8-1.sl5.i386.rpm * dmapi-devel-2.2.8-1.sl5.i386.rpm * kernel-module-xfs-2.6.18-92.1.6.el5-0.4-1.sl5.i686.rpm * kernel-module-xfs-2.6.18-92.1.6.el5PAE-0.4-1.sl5.i686.rpm * kernel-module-xfs-2.6.18-92.1.6.el5xen-0.4-1.sl5.i686.rpm *Yumex Yumex is a graphical user interface for yum. * Updated to the latest stable version * yumex-2.0.3-1.0.el5.noarch.rpm *yum-utils yum-utils is a collection of utilities and examples for the yum package manager. It includes utilities by different authors that make yum easier and more powerful to use. Some utilities are plugin's. * These plugin's have been updated to version 1.1.10, corresponding * to the yum-utils version provided by TUV * yum-installonlyn has been incorporated into yum * See comments in yum.conf on how to change settings for installonlyn * yum-allowdowngrade-1.1.10-10.el5.noarch.rpm * yum-fastestmirror-1.1.10-10.el5.noarch.rpm * yum-merge-conf-1.1.10-10.el5.noarch.rpm * yum-priorities-1.1.10-10.el5.noarch.rpm * yum-refresh-updatesd-1.1.10-10.el5.noarch.rpm * yum-tsflags-1.1.10-10.el5.noarch.rpm * yum-upgrade-helper-1.1.10-10.el5.noarch.rpm * The following have been replaced by a new version which is included * by TUV * yum-metadata-parser-1.0.4-1.sl5.i386.rpm * yum-utils-1.0.4-1.el5.noarch.rpm * yum-downloadonly-1.0.4-1.el5.noarch.rpm * yum-changelog-1.0.4-1.el5.noarch.rpm * yum-fedorakmod-1.0.4-1.el5.noarch.rpm * yum-installonlyn-1.0.4-2.sl5.noarch.rpm * yum-protectbase-1.0.4-1.el5.noarch.rpm * yum-skip-broken-1.0.4-1.el5.noarch.rpm * yum-updateonboot-1.0.4-1.el5.noarch.rpm * yum-versionlock-1.0.4-1.el5.noarch.rpm MISC Added these rpms because they are important but upstream vendor did not include them. gv-3.6.2-2.sl5.i386.rpm from Stephan Wiesand * Pine has been replaced by alpine ------------------------------------------------------------------------- Changed RPMS compared to vendor ------------------------------------------------------------------------- Installer(anaconda) * anaconda-11.1.2.113-3.SL.i386.rpm * anaconda-runtime-11.1.2.113-3.SL.i386.rpm * * Added kernel-module.py yum plugin during the install Modified pkgorder with patches from CentOS Modified installclasses/rhel.py to remove key request Modified installclasses/rhel.py to include SL groups sites support see sites/example Note: Installing sites on a virtual machine When installing a paravirtulized site, you have to point at the site directory, such as 5rolling/i386/sites/example When installing a fully virtulized site, you only have to point to the base directory, like you usually would, such as 5rolling/x86_64/sites/example *comps.xml * * Updated some group names and descriptions to work better internationally * * In Update 1 The Upstream Vendor changed their comps.xml files to * reflect a different sorting structure, as well as clean up extra * files from their short term linux release. * * In Update 2 The Upstream Vendor added more packages to their comps.xml * comps-sl.xml has been changed to incorporate most of * TUV changes. Since we have merged their various comps.xml files, * our comps.xml will never really look like theirs. But this * change brings ours more in line with their Update 2 versions. There are minimal changes compared to the "vendor" release. We have changed the "rpms" that are required to be changed. These changes are defined by the "vendor". redhat-artwork-5.0.9-1.SL.2.i386.rpm redhat-logos-4.9.16-1.SL.6.noarch.rpm * sl-release-5.2-1.i386.rpm * sl-release-notes-5.2-1.noarch.rpm sl-release changes the default mozilla and firefox bookmarks. sl-release changes the default rhn configuration to use yum and points this configuration to ftp.scientificlinux.org sl-release removed the firstboot additional cd's question redhat-logos was changed to add the "photographs" shown during the install These rpm's are not required to be changed by the vendor, but we felt they needed to be changed * gdm-2.16.0-46.sl5.i386.rpm Changed the default theme from RHEL to EaseOfBlue * pirut-1.3.28-13.sl.noarch.rpm * Removed "Requires: rhn-setup-gnome" rhgb-0.16.4-8.sl.1.i386.rpm Changed the colors. python-virtinst virtinst is a module to help in starting installations inside of virtual machines. It supports both paravirt guests as well as fully virtualized guests. It uses libvirt (http://www.libvirt.org) for starting things. Also contained is a simple script virt-install which uses virtinst in a command line mode. It was only configured to know about TUV virtual machines. We added a patch so that it knew about Scientific Linux, and thus be able to install SL paravirtual machines. * python-virtinst-0.300.2-8.sl.noarch.rpm yum Yum version 2.4 and above has the kernel-module plugin that let's yum understand how kernel-module rpm's are related to kernels. Because of this updates dealing with kernel-module rpm's (such as afs) now work yum-conf * priorities have been set on the repositories. But you have to have * yum-priorities installed for them to take effect. metadata_expire variable was set to 20 hours to allow for normal users to be able to use yum for those commands they can run yum-conf has the following repositories in it sl-base (enabled) sl-security (enabled) sl-testing (not enabled) sl-fastbugs (not enabled) sl-bugfix-51 (not enabled) atrpms (not enabled) dag (not enabled) flash (not enabled) Not all repositories are enabled by default. To enable them for one time use, use the --enablerepo command, such as yum --enablerepo=atrpms list mplayer yum --enablerepo=dag install xine yum --enablerepo=adobe install flash-player If you want the repositories to be enabled all the time then you need to edit the config files and change enabled=0 to enabled=1. The config files are in the /etc/yum.repos.d/ directory and are named like /etc/yum.repos.d/atrpms.repo /etc/yum.repos.d/dag.repo NOTE1: Just because a yum repository exists does NOT mean it is compatible with all other yum repositories. We have included the repositories we did because they usually work well together. But if there is a problem with one of the packages in a repository, please contact that repository maintainer. yum-autoupdate yum-autoupdate has the check for a running yum in it, so that if yum has been running for a long time (close to 24 hours), when the yum.cron starts up, it will kill the old yum. This was changed because we had reports that yum was hanging and we didn't want this to interfere with updates. yum-autoupdate checks to see how long the machine is been up If it is up less than 20 hours, it doesn't wait, but does the update. If it is longer than 20 hours, it waits a random time, up to 3 hours. This uptime check was done to help laptops and other machines that might not be on long enough to wait for the random time. The random time was put it in so that servers arn't overwhelmed. yum-conf-5x was created for those users who want to be at the latest stable release. It is always pointing at the 5x area. This means that when we make new versions you will automatically be upgraded to them. * yum-conf-epel has been added so that people could use the epel yum * repository. This rpm requires both yum-provides and yum-fastestmirror * yum-3.2.8-10.sl.noarch.rpm yum-autoupdate-1-1.SL.noarch.rpm * yum-conf-52-2.SL.noarch.rpm * yum-conf-5x-1-5.SL.noarch.rpm * yum-conf-epel-5-1.noarch.rpm * yum-rhn-plugin-0.5.3-6.el5_2.6.noarch.rpm * yum-updatesd-0.9-2.sl.noarch.rpm Apache Changed index.html to not have Upstream Vendor info but to have SL info. * httpd-2.2.3-11.sl5.3.1.i386.rpm * httpd-devel-2.2.3-11.sl5.3.1.i386.rpm * httpd-manual-2.2.3-11.sl5.3.1.i386.rpm * mod_ssl-2.2.3-11.sl5.3.1.i386.rpm Changed in order to be built Some rpm's had to be changed in order for us to build them. The following rpm's had to have a variable changed so that they point to the current include file brlapi-0.4.1-1.fc6.1.i386.rpm brlapi-devel-0.4.1-1.fc6.1.i386.rpm brltty-3.7.2-1.fc6.1.i386.rpm ----------------------------------------------------------------------------- /SL/ ----------------------------------------------------------------------------- The Upstream Vendor's release consists of 2 cd sets, Server and Client. Each cd set has a group of directories which contain the actual rpms. On the Client cd this consists of Client,Workstation and VT. On the Server cd this consists of Server,VT,Cluster, ClusterStorage. The VT directory contains the same rpms on each cd. The Cluster, ClusterStorage and Workstation directories do not have any common rpms. The Client and Server directories contain many common rpms along with many unique rpms. Scientific Linux has combined all of the rpm's from Client, Server, VT, Cluster, ClusterStorage, and Workstation into the SL directory. You are not asked to enter any key, since you have access to all packages. ----------------------------------------------------------------------------- /contrib/ ------------------------------------------------------------------------------ RPMS provided by colaboraters that either cannot go in main release or are intesting before going into main release. See the SRPMS section for source rpms ----------------------------------------------------------------------------- /updates/ ----------------------------------------------------------------------------- security Security errata fastbugs Packages rebuilt from the Upstream Vendor Fastrack rpms These are rpms that are expected to be in the next Update They have gone through full QA by the Upstream Vendor bugfix51 Reserved for packages from the next Update. --------------------------------------------------------------------------- /../SRPMS/ --------------------------------------------------------------------------- /SL/ Contains the SRPMS for what we added or changed. Put these in the top level directory as these are really the ones we changed. All the others can be obtained from the upstream vendor ftp updates area /vendor/ The upstream vendors SRPMS. This directory contains both the original released SRPMS, as well as the updated SRPMS /contrib/ SRPMS for the contrib packages /sites//SRPMS SRPMS for sites, if there is a site --------------------------------------------------------------------------- /../archive/ --------------------------------------------------------------------------- /obsolete/ Packages that used to be in the release but have been updated /debuginfo/ Debuginfo packages ----------------------------------------------------------------------------- LIMITATIONS ----------------------------------------------------------------------------- ipw2100, ipw2200, ipw3945 Does not work in the installer ftp install Currently, during an ftp install when it get's the the graphical section, there is a long pause (close to a minute) when it sits at a blank screen. It is NOT frozen, it is just searching for files that are not there. Give it a couple minutes and it will continue. This will be fixed before the final release. NVIDIA motherboard chipsets May need to use linux noapic to install. Intel 965 motherboard chipset May need to use linux all-generic-ide if you have pata hardware ----------------------------------------------------------------------------- INFO ----------------------------------------------------------------------------- Web Site https://www.scientificlinux.org FTP ftp://ftp.scientificlinux.org/linux/scientific/52/ Mailing Lists scientific-linux-devel@fnal.gov Development of Scientific Linux scientific-linux-users@fnal.gov Users of Scientific Linux supporting each other scientific-linux-announce@fnal.gov Announcements concerning Scientific Linux scientific-linux-errata@fnal.gov Announcements about Security Errata ------------------------------------------------------------------------- ERRATA rebuilt from SRPMS that were released after TUV Update 2 ------------------------------------------------------------------------- * cups-1.2.4-11.18.el5_2.1.i386.rpm * cups-devel-1.2.4-11.18.el5_2.1.i386.rpm * cups-libs-1.2.4-11.18.el5_2.1.i386.rpm * cups-lpd-1.2.4-11.18.el5_2.1.i386.rpm * evolution-2.12.3-8.el5_2.2.i386.rpm * evolution-devel-2.12.3-8.el5_2.2.i386.rpm * evolution-help-2.12.3-8.el5_2.2.i386.rpm * kmod-gfs2-1.92-1.1.el5_2.2.i686.rpm * kmod-gfs2-PAE-1.92-1.1.el5_2.2.i686.rpm * kmod-gfs2-xen-1.92-1.1.el5_2.2.i686.rpm * paps-0.6.6-18.el5.i386.rpm * rgmanager-2.0.38-2.el5_2.1.i386.rpm * scim-1.4.4-41.el5.i386.rpm * scim-bridge-0.4.5-8.el5.i386.rpm * scim-bridge-gtk-0.4.5-8.el5.i386.rpm * scim-devel-1.4.4-41.el5.i386.rpm * scim-doc-1.4.4-41.el5.i386.rpm * scim-libs-1.4.4-41.el5.i386.rpm * net-snmp-5.3.1-24.el5_2.1.i386.rpm * net-snmp-devel-5.3.1-24.el5_2.1.i386.rpm * net-snmp-libs-5.3.1-24.el5_2.1.i386.rpm * net-snmp-perl-5.3.1-24.el5_2.1.i386.rpm * net-snmp-utils-5.3.1-24.el5_2.1.i386.rp * dhcpv6-1.0.10-4.el5_2.2.i386.rpm * dhcpv6-client-1.0.10-4.el5_2.2.i386.rpm * gdm-2.16.0-46.sl5.i386.rpm * ipsec-tools-0.6.5-9.el5_2.1.i386.rpm * kernel-2.6.18-92.1.1.el5.i686.rpm * kernel-debug-2.6.18-92.1.1.el5.i686.rpm * kernel-debug-devel-2.6.18-92.1.1.el5.i686.rpm * kernel-devel-2.6.18-92.1.1.el5.i686.rpm * kernel-doc-2.6.18-92.1.1.el5.noarch.rpm * kernel-headers-2.6.18-92.1.1.el5.i386.rpm * kernel-PAE-2.6.18-92.1.1.el5.i686.rpm * kernel-PAE-devel-2.6.18-92.1.1.el5.i686.rpm * kernel-xen-2.6.18-92.1.1.el5.i686.rpm * kernel-xen-devel-2.6.18-92.1.1.el5.i686.rpm * libdhcp6client-1.0.10-4.el5_2.2.i386.rpm * libdhcp6client-devel-1.0.10-4.el5_2.2.i386.rpm * openswan-2.6.14-1.el5_2.1.i386.rpm * openswan-doc-2.6.14-1.el5_2.1.i386.rpm * perl-5.8.8-10.el5_2.3.i386.rpm * perl-suidperl-5.8.8-10.el5_2.3.i386.rpm * xorg-x11-server-randr-source-1.1.1-48.41.el5_2.1.i386.rpm * xorg-x11-server-sdk-1.1.1-48.41.el5_2.1.i386.rpm * xorg-x11-server-Xdmx-1.1.1-48.41.el5_2.1.i386.rpm * xorg-x11-server-Xephyr-1.1.1-48.41.el5_2.1.i386.rpm * xorg-x11-server-Xnest-1.1.1-48.41.el5_2.1.i386.rpm * xorg-x11-server-Xorg-1.1.1-48.41.el5_2.1.i386.rpm * xorg-x11-server-Xvfb-1.1.1-48.41.el5_2.1.i386.rpm * desktop-printing-0.19-20.2.el5.i386.rpm * diffstat-1.41-1.2.3.el5.i386.rpm * gdb-6.5-37.el5_2.2.i386.rpm * ghostscript-8.15.2-9.3.el5.i386.rpm * ghostscript-devel-8.15.2-9.3.el5.i386.rpm * ghostscript-gtk-8.15.2-9.3.el5.i386.rpm * openoffice.org-base-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-calc-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-core-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-draw-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-emailmerge-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-graphicfilter-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-headless-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-impress-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-javafilter-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-af_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ar-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-as_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-bg_BG-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-bn-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ca_ES-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-cs_CZ-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-cy_GB-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-da_DK-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-de-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-el_GR-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-es-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-et_EE-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-eu_ES-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-fi_FI-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-fr-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ga_IE-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-gl_ES-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-gu_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-he_IL-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-hi_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-hr_HR-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-hu_HU-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-it-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ja_JP-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-kn_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ko_KR-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-lt_LT-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ml_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-mr_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ms_MY-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-nb_NO-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-nl-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-nn_NO-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-nr_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-nso_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-or_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-pa_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-pl_PL-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-pt_BR-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-pt_PT-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ru-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-sk_SK-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-sl_SI-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-sr_CS-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ss_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-st_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-sv-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ta_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-te_IN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-th_TH-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-tn_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-tr_TR-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ts_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ur-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-ve_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-xh_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-zh_CN-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-zh_TW-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-langpack-zu_ZA-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-math-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-pyuno-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-sdk-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-sdk-doc-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-testtools-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-writer-2.3.0-6.5.1.el5_2.i386.rpm * openoffice.org-xsltfilter-2.3.0-6.5.1.el5_2.i386.rpm * freetype-2.2.1-20.el5_2.i386.rpm * freetype-demos-2.2.1-20.el5_2.i386.rpm * freetype-devel-2.2.1-20.el5_2.i386.rpm * sblim-cim-client-1.3.3-31.el5_2.1.i386.rpm * sblim-cim-client-javadoc-1-31.el5_2.1.i386.rpm * sblim-cim-client-manual-1-31.el5_2.1.i386.rpm * sblim-cmpi-base-1.5.5-31.el5_2.1.i386.rpm * sblim-cmpi-base-devel-1.5.5-31.el5_2.1.i386.rpm * sblim-cmpi-base-test-1.5.5-31.el5_2.1.i386.rpm * sblim-cmpi-devel-1.0.4-31.el5_2.1.i386.rpm * sblim-cmpi-dns-0.5.2-31.el5_2.1.i386.rpm * sblim-cmpi-dns-devel-1-31.el5_2.1.i386.rpm * sblim-cmpi-dns-test-1-31.el5_2.1.i386.rpm * sblim-cmpi-fsvol-1.4.4-31.el5_2.1.i386.rpm * sblim-cmpi-fsvol-devel-1.4.4-31.el5_2.1.i386.rpm * sblim-cmpi-fsvol-test-1.4.4-31.el5_2.1.i386.rpm * sblim-cmpi-network-1.3.8-31.el5_2.1.i386.rpm * sblim-cmpi-network-devel-1.3.8-31.el5_2.1.i386.rpm * sblim-cmpi-network-test-1.3.8-31.el5_2.1.i386.rpm * sblim-cmpi-nfsv3-1.0.14-31.el5_2.1.i386.rpm * sblim-cmpi-nfsv3-test-1.0.14-31.el5_2.1.i386.rpm * sblim-cmpi-nfsv4-1.0.12-31.el5_2.1.i386.rpm * sblim-cmpi-nfsv4-test-1.0.12-31.el5_2.1.i386.rpm * sblim-cmpi-params-1.2.6-31.el5_2.1.i386.rpm * sblim-cmpi-params-test-1.2.6-31.el5_2.1.i386.rpm * sblim-cmpi-samba-0.5.2-31.el5_2.1.i386.rpm * sblim-cmpi-samba-devel-1-31.el5_2.1.i386.rpm * sblim-cmpi-samba-test-1-31.el5_2.1.i386.rpm * sblim-cmpi-sysfs-1.1.9-31.el5_2.1.i386.rpm * sblim-cmpi-sysfs-test-1.1.9-31.el5_2.1.i386.rpm * sblim-cmpi-syslog-0.7.11-31.el5_2.1.i386.rpm * sblim-cmpi-syslog-test-0.7.11-31.el5_2.1.i386.rpm * sblim-gather-2.1.2-31.el5_2.1.i386.rpm * sblim-gather-devel-2.1.2-31.el5_2.1.i386.rpm * sblim-gather-provider-2.1.2-31.el5_2.1.i386.rpm * sblim-gather-test-2.1.2-31.el5_2.1.i386.rpm * sblim-testsuite-1.2.4-31.el5_2.1.i386.rpm * sblim-tools-libra-0.2.3-31.el5_2.1.i386.rpm * sblim-tools-libra-devel-0.2.3-31.el5_2.1.i386.rpm * sblim-wbemcli-1.5.1-31.el5_2.1.i386.rpm * cryptsetup-luks-1.0.3-4.el5.i386.rpm * cryptsetup-luks-devel-1.0.3-4.el5.i386.rpm * Deployment_Guide-as-IN-5.2-11.noarch.rpm * Deployment_Guide-bn-IN-5.2-11.noarch.rpm * Deployment_Guide-de-DE-5.2-11.noarch.rpm * Deployment_Guide-en-US-5.2-11.noarch.rpm * Deployment_Guide-es-ES-5.2-11.noarch.rpm * Deployment_Guide-fr-FR-5.2-11.noarch.rpm * Deployment_Guide-gu-IN-5.2-11.noarch.rpm * Deployment_Guide-hi-IN-5.2-11.noarch.rpm * Deployment_Guide-it-IT-5.2-11.noarch.rpm * Deployment_Guide-ja-JP-5.2-11.noarch.rpm * Deployment_Guide-kn-IN-5.2-11.noarch.rpm * Deployment_Guide-ko-KR-5.2-11.noarch.rpm * Deployment_Guide-ml-IN-5.2-11.noarch.rpm * Deployment_Guide-mr-IN-5.2-11.noarch.rpm * Deployment_Guide-or-IN-5.2-11.noarch.rpm * Deployment_Guide-pa-IN-5.2-11.noarch.rpm * Deployment_Guide-pt-BR-5.2-11.noarch.rpm * Deployment_Guide-ru-RU-5.2-11.noarch.rpm * Deployment_Guide-si-LK-5.2-11.noarch.rpm * Deployment_Guide-ta-IN-5.2-11.noarch.rpm * Deployment_Guide-te-IN-5.2-11.noarch.rpm * Deployment_Guide-zh-CN-5.2-11.noarch.rpm * Deployment_Guide-zh-TW-5.2-11.noarch.rpm * kernel-2.6.18-92.1.6.el5.i686.rpm * kernel-debug-2.6.18-92.1.6.el5.i686.rpm * kernel-debug-devel-2.6.18-92.1.6.el5.i686.rpm * kernel-devel-2.6.18-92.1.6.el5.i686.rpm * kernel-doc-2.6.18-92.1.6.el5.noarch.rpm * kernel-headers-2.6.18-92.1.6.el5.i386.rpm * kernel-PAE-2.6.18-92.1.6.el5.i686.rpm * kernel-PAE-devel-2.6.18-92.1.6.el5.i686.rpm * kernel-xen-2.6.18-92.1.6.el5.i686.rpm * kernel-xen-devel-2.6.18-92.1.6.el5.i686.rpm