patch-2.3.15 linux/drivers/atm/eni.h

• Lines: 116
• Date: Mon Aug 23 09:56:31 1999
• Orig file: v2.3.14/linux/drivers/atm/eni.h
• Orig date: Wed Dec 31 16:00:00 1969

diff -u --recursive --new-file v2.3.14/linux/drivers/atm/eni.h linux/drivers/atm/eni.h
@@ -0,0 +1,115 @@
+/* drivers/atm/eni.h - Efficient Networks ENI155P device driver declarations */
+ 
+/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */
+ 
+ 
+#ifndef DRIVER_ATM_ENI_H
+#define DRIVER_ATM_ENI_H
+
+#include <linux/atm.h>
+#include <linux/atmdev.h>
+#include <linux/sonet.h>
+#include <linux/skbuff.h>
+#include <linux/time.h>
+#include <linux/pci.h>
+
+#include "midway.h"
+
+
+#define KERNEL_OFFSET	0xC0000000	/* kernel 0x0 is at phys 0xC0000000 */
+#define DEV_LABEL	"eni"
+
+#define UBR_BUFFER	(128*1024)	/* UBR buffer size */
+
+#define RX_DMA_BUF	  8		/* burst and skip a few things */
+#define TX_DMA_BUF	100		/* should be enough for 64 kB */
+
+
+struct eni_free {
+	unsigned long start;		/* counting in bytes */
+	int order;
+};
+
+struct eni_tx {
+	unsigned long send;		/* base, 0 if unused */
+	int prescaler;			/* shaping prescaler */
+	int resolution;			/* shaping divider */
+	unsigned long tx_pos;		/* current TX write position */
+	unsigned long words;		/* size of TX queue */
+	int index;			/* TX channel number */
+	int reserved;			/* reserved peak cell rate */
+	int shaping;			/* shaped peak cell rate */
+	struct sk_buff_head backlog;	/* queue of waiting TX buffers */
+};
+
+struct eni_vcc {
+	int (*rx)(struct atm_vcc *vcc);	/* RX function, NULL if none */
+	unsigned long recv;		/* receive buffer */
+	unsigned long words;		/* its size in words */
+	unsigned long descr;		/* next descriptor (RX) */
+	unsigned long rx_pos;		/* current RX descriptor pos */
+	struct eni_tx *tx;		/* TXer, NULL if none */
+	int rxing;			/* number of pending PDUs */
+	int servicing;			/* number of waiting VCs (0 or 1) */
+	int txing;			/* number of pending TX cells/PDUs */
+	struct timeval timestamp;	/* for RX timing */
+	struct atm_vcc *next;		/* next pending RX */
+	struct sk_buff *last;		/* last PDU being DMAed (used to carry
+					   discard information) */
+};
+
+struct eni_dev {
+	/*-------------------------------- base pointers into Midway address
+					   space */
+	unsigned long phy;		/* PHY interface chip registers */
+	unsigned long reg;		/* register base */
+	unsigned long ram;		/* RAM base */
+	unsigned long vci;		/* VCI table */
+	unsigned long rx_dma;		/* RX DMA queue */
+	unsigned long tx_dma;		/* TX DMA queue */
+	unsigned long service;		/* service list */
+	/*-------------------------------- TX part */
+	struct eni_tx tx[NR_CHAN];	/* TX channels */
+	struct eni_tx *ubr;		/* UBR channel */
+	struct sk_buff_head tx_queue;	/* PDUs currently being TX DMAed*/
+	wait_queue_head_t tx_wait;	/* for close */
+	int tx_bw;			/* remaining bandwidth */
+	u32 dma[TX_DMA_BUF*2];		/* DMA request scratch area */
+	/*-------------------------------- RX part */
+	u32 serv_read;			/* host service read index */
+	struct atm_vcc *fast,*last_fast;/* queues of VCCs with pending PDUs */
+	struct atm_vcc *slow,*last_slow;
+	struct atm_vcc **rx_map;	/* for fast lookups */
+	struct sk_buff_head rx_queue;	/* PDUs currently being RX-DMAed */
+	wait_queue_head_t rx_wait;	/* for close */
+	/*-------------------------------- statistics */
+	unsigned long lost;		/* number of lost cells (RX) */
+	/*-------------------------------- memory management */
+	unsigned long base_diff;	/* virtual-real base address */
+	int free_len;			/* free list length */
+	struct eni_free *free_list;	/* free list */
+	int free_list_size;		/* maximum size of free list */
+	/*-------------------------------- ENI links */
+	struct atm_dev *more;		/* other ENI devices */
+	/*-------------------------------- general information */
+	int mem;			/* RAM on board (in bytes) */
+	int asic;			/* PCI interface type, 0 for FPGA */
+	unsigned char irq;		/* IRQ */
+	struct pci_dev *pci_dev;	/* PCI stuff */
+};
+
+
+#define ENI_DEV(d) ((struct eni_dev *) (d)->dev_data)
+#define ENI_VCC(d) ((struct eni_vcc *) (d)->dev_data)
+
+
+struct eni_skb_prv {
+	struct atm_skb_data _;		/* reserved */
+	unsigned long pos;		/* position of next descriptor */
+	int size;			/* PDU size in reassembly buffer */
+};
+
+#define ENI_PRV_SIZE(skb) (((struct eni_skb_prv *) (skb)->cb)->size)
+#define ENI_PRV_POS(skb) (((struct eni_skb_prv *) (skb)->cb)->pos)
+
+#endif