patch-2.3.20 linux/arch/m68k/config.in
Next file: linux/arch/mips/config.in
Previous file: linux/arch/i386/kernel/traps.c
Back to the patch index
Back to the overall index
- Lines: 705
- Date:
Thu Oct 7 10:17:08 1999
- Orig file:
v2.3.19/linux/arch/m68k/config.in
- Orig date:
Tue Sep 7 12:14:06 1999
diff -u --recursive --new-file v2.3.19/linux/arch/m68k/config.in linux/arch/m68k/config.in
@@ -10,40 +10,31 @@
endmenu
mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
- bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
- bool 'Kernel module loader' CONFIG_KMOD
-fi
-endmenu
-
-mainmenu_option next_comment
comment 'Platform dependent setup'
bool 'Amiga support' CONFIG_AMIGA
bool 'Atari support' CONFIG_ATARI
if [ "$CONFIG_ATARI" = "y" ]; then
- bool ' Hades support' CONFIG_HADES
- if [ "$CONFIG_HADES" = "y" ]; then
- define_bool CONFIG_PCI y
- fi
+ bool ' Hades support' CONFIG_HADES
+ if [ "$CONFIG_HADES" = "y" ]; then
+ define_bool CONFIG_PCI y
+ fi
fi
bool 'Macintosh support' CONFIG_MAC
if [ "$CONFIG_MAC" = "y" ]; then
- define_bool CONFIG_NUBUS y
- define_bool CONFIG_M68K_L2_CACHE y
+ define_bool CONFIG_NUBUS y
+ define_bool CONFIG_M68K_L2_CACHE y
fi
bool 'Apollo support' CONFIG_APOLLO
bool 'VME (Motorola and BVM) support' CONFIG_VME
if [ "$CONFIG_VME" = "y" ]; then
- bool 'MVME147 support' CONFIG_MVME147
- bool 'MVME162, 166 and 167 support' CONFIG_MVME16x
- bool 'BVME4000 and BVME6000 support' CONFIG_BVME6000
+ bool ' MVME147 support' CONFIG_MVME147
+ bool ' MVME162, 166 and 167 support' CONFIG_MVME16x
+ bool ' BVME4000 and BVME6000 support' CONFIG_BVME6000
fi
bool 'HP9000/300 support' CONFIG_HP300
if [ "$CONFIG_HP300" = "y" ]; then
- bool 'DIO bus support' CONFIG_DIO
+ bool ' DIO bus support' CONFIG_DIO
fi
bool 'Sun3x support' CONFIG_SUN3X
@@ -56,19 +47,19 @@
bool '68040 support' CONFIG_M68040
bool '68060 support' CONFIG_M68060
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'Math emulation support' CONFIG_M68KFPU_EMU
- if [ "$CONFIG_M68KFPU_EMU" = "y" ]; then
- bool 'Math emulation extra precision' CONFIG_M68KFPU_EMU_EXTRAPREC
- bool 'Math emulation only kernel' CONFIG_M68KFPU_EMU_ONLY
- fi
+ bool 'Math emulation support (EXPERIMENTAL)' CONFIG_M68KFPU_EMU
+ if [ "$CONFIG_M68KFPU_EMU" = "y" ]; then
+ bool ' Math emulation extra precision' CONFIG_M68KFPU_EMU_EXTRAPREC
+ bool ' Math emulation only kernel' CONFIG_M68KFPU_EMU_ONLY
+ fi
fi
bool 'Advanced configuration options' CONFIG_ADVANCED
if [ "$CONFIG_ADVANCED" = "y" ]; then
- bool 'Use read-modify-write instructions' CONFIG_RMW_INSNS
- bool 'Use one physical chunk of memory only' CONFIG_SINGLE_MEMORY_CHUNK
- if [ "$CONFIG_M68060" = "y" ]; then
- bool 'Use write-through caching for 68060 supervisor accesses' CONFIG_060_WRITETHROUGH
- fi
+ bool 'Use read-modify-write instructions' CONFIG_RMW_INSNS
+ bool 'Use one physical chunk of memory only' CONFIG_SINGLE_MEMORY_CHUNK
+ if [ "$CONFIG_M68060" = "y" ]; then
+ bool 'Use write-through caching for 68060 supervisor accesses' CONFIG_060_WRITETHROUGH
+ fi
fi
endmenu
@@ -86,55 +77,64 @@
if [ "$CONFIG_AMIGA" = "y" ]; then
bool 'Amiga Zorro (AutoConfig) bus support' CONFIG_ZORRO
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'Amiga 1200/600 PCMCIA support' CONFIG_AMIGA_PCMCIA
+ bool 'Amiga 1200/600 PCMCIA support (EXPERIMENTAL)' CONFIG_AMIGA_PCMCIA
fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
- bool 'Support for ST-RAM as swap space' CONFIG_STRAM_SWAP
- bool 'ST-RAM statistics in /proc' CONFIG_STRAM_PROC
+ bool 'Support for ST-RAM as swap space' CONFIG_STRAM_SWAP
+ bool 'ST-RAM statistics in /proc' CONFIG_STRAM_PROC
fi
if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_ATARI" = "y" ]; then
- bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
+ bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
else
if [ "$CONFIG_HP300" = "y" ]; then
-# We have a dedicated heartbeat LED. :-)
- define_bool CONFIG_HEARTBEAT y
+ # We have a dedicated heartbeat LED. :-)
+ define_bool CONFIG_HEARTBEAT y
fi
fi
bool '/proc/hardware support' CONFIG_PROC_HARDWARE
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- tristate 'Parallel port support (EXPERIMENTAL)' CONFIG_PARPORT
- if [ "$CONFIG_PARPORT" != "n" ]; then
- if [ "$CONFIG_AMIGA" != "n" ]; then
- dep_tristate ' Amiga builtin port' CONFIG_PARPORT_AMIGA $CONFIG_PARPORT
- if [ "$CONFIG_ZORRO" != "n" ]; then
- dep_tristate ' Multiface III parallel port' CONFIG_PARPORT_MFC3 $CONFIG_PARPORT
+ tristate 'Parallel port support (EXPERIMENTAL)' CONFIG_PARPORT
+ if [ "$CONFIG_PARPORT" != "n" ]; then
+ if [ "$CONFIG_AMIGA" != "n" ]; then
+ dep_tristate ' Amiga builtin port' CONFIG_PARPORT_AMIGA $CONFIG_PARPORT
+ if [ "$CONFIG_ZORRO" != "n" ]; then
+ dep_tristate ' Multiface III parallel port' CONFIG_PARPORT_MFC3 $CONFIG_PARPORT
+ fi
fi
- fi
- if [ "$CONFIG_Q40" != "n" ]; then
- tristate ' Q40 Parallel port' CONFIG_PARPORT
- if [ "$CONFIG_PARPORT" != "n" ]; then
- define_bool CONFIG_PARPORT_PC y
- fi
- fi
- fi
- if [ "$CONFIG_ATARI" == "y" ]; then
- dep_tristate ' Atari builtin port' CONFIG_PARPORT_ATARI $CONFIG_PARPORT
- fi
- dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
- if [ "$CONFIG_PRINTER" != "n" ]; then
- bool ' Support IEEE1284 status readback' CONFIG_PRINTER_READBACK
- fi
+ if [ "$CONFIG_Q40" != "n" ]; then
+ tristate ' Q40 Parallel port' CONFIG_PARPORT
+ if [ "$CONFIG_PARPORT" != "n" ]; then
+ define_bool CONFIG_PARPORT_PC y
+ fi
+ fi
+ fi
+ if [ "$CONFIG_ATARI" = "y" ]; then
+ dep_tristate ' Atari builtin port' CONFIG_PARPORT_ATARI $CONFIG_PARPORT
+ fi
+ dep_tristate ' Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT
+ if [ "$CONFIG_PRINTER" != "n" ]; then
+ bool ' Support IEEE1284 status readback' CONFIG_PRINTER_READBACK
+ fi
fi
endmenu
+mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ]; then
+ bool ' Set version information on all symbols for modules' CONFIG_MODVERSIONS
+ bool ' Kernel module loader' CONFIG_KMOD
+fi
+endmenu
+
source drivers/block/Config.in
if [ "$CONFIG_NET" = "y" ]; then
- source net/Config.in
+ source net/Config.in
fi
mainmenu_option next_comment
@@ -144,154 +144,154 @@
if [ "$CONFIG_SCSI" != "n" ]; then
-comment 'SCSI support type (disk, tape, CD-ROM)'
-
-dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
-dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
-dep_tristate 'SCSI CD-ROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
-if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
- bool ' Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
-fi
-dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
-
-comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
-
-bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
-
-bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
-bool 'SCSI logging facility' CONFIG_SCSI_LOGGING
+ comment 'SCSI support type (disk, tape, CD-ROM)'
-mainmenu_option next_comment
-comment 'SCSI low-level drivers'
-
-if [ "$CONFIG_AMIGA" = "y" ]; then
- dep_tristate 'A3000 WD33C93A support' CONFIG_A3000_SCSI $CONFIG_SCSI
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'A4000T SCSI support' CONFIG_A4000T_SCSI
- fi
-fi
-if [ "$CONFIG_ZORRO" = "y" ]; then
- dep_tristate 'A2091 WD33C93A support' CONFIG_A2091_SCSI $CONFIG_SCSI
- dep_tristate 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI $CONFIG_SCSI
- dep_tristate 'CyberStorm SCSI support' CONFIG_CYBERSTORM_SCSI $CONFIG_SCSI
- dep_tristate 'CyberStorm Mk II SCSI support' CONFIG_CYBERSTORMII_SCSI $CONFIG_SCSI
- dep_tristate 'Blizzard 2060 SCSI support' CONFIG_BLZ2060_SCSI $CONFIG_SCSI
- dep_tristate 'Blizzard 1230IV/1260 SCSI support' CONFIG_BLZ1230_SCSI $CONFIG_SCSI
- dep_tristate 'Fastlane SCSI support' CONFIG_FASTLANE_SCSI $CONFIG_SCSI
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- bool 'A4091 SCSI support' CONFIG_A4091_SCSI
- bool 'WarpEngine SCSI support' CONFIG_WARPENGINE_SCSI
- bool 'Blizzard PowerUP 603e+ SCSI' CONFIG_BLZ603EPLUS_SCSI
- dep_tristate 'BSC Oktagon SCSI support' CONFIG_OKTAGON_SCSI $CONFIG_SCSI
- bool 'Cyberstorm Mk III SCSI support' CONFIG_CYBERSTORMIII_SCSI
-# bool 'GVP Turbo 040/060 SCSI support' CONFIG_GVP_TURBO_SCSI
- fi
-fi
-if [ "$CONFIG_ATARI" = "y" ]; then
- dep_tristate 'Atari native SCSI support' CONFIG_ATARI_SCSI $CONFIG_SCSI
- if [ "$CONFIG_ATARI_SCSI" != "n" ]; then
- bool ' Long delays for Toshiba CD-ROMs' CONFIG_ATARI_SCSI_TOSHIBA_DELAY
- bool ' Reset SCSI-devices at boottime' CONFIG_ATARI_SCSI_RESET_BOOT
- if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_HADES" = "y" ]; then
- bool ' Hades SCSI DMA emulator (EXPERIMENTAL)' CONFIG_TT_DMA_EMUL
- fi
- fi
-fi
-if [ "$CONFIG_MAC" = "y" ]; then
- bool 'Macintosh NCR5380 SCSI' CONFIG_MAC_SCSI
- dep_tristate 'Macintosh NCR53c9[46] SCSI' CONFIG_SCSI_MAC_ESP $CONFIG_SCSI
-fi
-#dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
-
-if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
- bool 'WD33C93 SCSI driver for MVME147' CONFIG_MVME147_SCSI
-fi
-
-if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
- bool 'NCR53C710 SCSI driver for MVME16x' CONFIG_MVME16x_SCSI
-fi
+ dep_tristate ' SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
+ dep_tristate ' SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
+ dep_tristate ' SCSI CD-ROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
+ if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
+ bool ' Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
+ fi
+ dep_tristate ' SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
+
+ comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
+
+ bool ' Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
+
+ bool ' Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
+ bool ' SCSI logging facility' CONFIG_SCSI_LOGGING
+
+ mainmenu_option next_comment
+ comment 'SCSI low-level drivers'
+
+ if [ "$CONFIG_AMIGA" = "y" ]; then
+ dep_tristate 'A3000 WD33C93A support' CONFIG_A3000_SCSI $CONFIG_SCSI
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ bool 'A4000T SCSI support (EXPERIMENTAL)' CONFIG_A4000T_SCSI
+ fi
+ fi
+ if [ "$CONFIG_ZORRO" = "y" ]; then
+ dep_tristate 'A2091 WD33C93A support' CONFIG_A2091_SCSI $CONFIG_SCSI
+ dep_tristate 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI $CONFIG_SCSI
+ dep_tristate 'CyberStorm SCSI support' CONFIG_CYBERSTORM_SCSI $CONFIG_SCSI
+ dep_tristate 'CyberStorm Mk II SCSI support' CONFIG_CYBERSTORMII_SCSI $CONFIG_SCSI
+ dep_tristate 'Blizzard 2060 SCSI support' CONFIG_BLZ2060_SCSI $CONFIG_SCSI
+ dep_tristate 'Blizzard 1230IV/1260 SCSI support' CONFIG_BLZ1230_SCSI $CONFIG_SCSI
+ dep_tristate 'Fastlane SCSI support' CONFIG_FASTLANE_SCSI $CONFIG_SCSI
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ bool 'A4091 SCSI support (EXPERIMENTAL)' CONFIG_A4091_SCSI
+ bool 'WarpEngine SCSI support (EXPERIMENTAL)' CONFIG_WARPENGINE_SCSI
+ bool 'Blizzard PowerUP 603e+ SCSI (EXPERIMENTAL)' CONFIG_BLZ603EPLUS_SCSI
+ dep_tristate 'BSC Oktagon SCSI support (EXPERIMENTAL)' CONFIG_OKTAGON_SCSI $CONFIG_SCSI
+ bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI
+# bool 'GVP Turbo 040/060 SCSI support (EXPERIMENTAL)' CONFIG_GVP_TURBO_SCSI
+ fi
+ fi
+ if [ "$CONFIG_ATARI" = "y" ]; then
+ dep_tristate 'Atari native SCSI support' CONFIG_ATARI_SCSI $CONFIG_SCSI
+ if [ "$CONFIG_ATARI_SCSI" != "n" ]; then
+ bool ' Long delays for Toshiba CD-ROMs' CONFIG_ATARI_SCSI_TOSHIBA_DELAY
+ bool ' Reset SCSI-devices at boottime' CONFIG_ATARI_SCSI_RESET_BOOT
+ if [ "$CONFIG_EXPERIMENTAL" = "y" -a "$CONFIG_HADES" = "y" ]; then
+ bool ' Hades SCSI DMA emulator (EXPERIMENTAL)' CONFIG_TT_DMA_EMUL
+ fi
+ fi
+ fi
+ if [ "$CONFIG_MAC" = "y" ]; then
+ bool 'Macintosh NCR5380 SCSI' CONFIG_MAC_SCSI
+ dep_tristate 'Macintosh NCR53c9[46] SCSI' CONFIG_SCSI_MAC_ESP $CONFIG_SCSI
+ fi
+# dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
+
+ if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
+ bool 'WD33C93 SCSI driver for MVME147' CONFIG_MVME147_SCSI
+ fi
+
+ if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
+ bool 'NCR53C710 SCSI driver for MVME16x' CONFIG_MVME16x_SCSI
+ fi
+
+ if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
+ bool 'NCR53C710 SCSI driver for BVME6000' CONFIG_BVME6000_SCSI
+ fi
+
+ if [ "$CONFIG_SUN3X" = "y" ]; then
+ bool 'ESP SCSI driver' CONFIG_SUN3X_ESP
+ fi
-if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
- bool 'NCR53C710 SCSI driver for BVME6000' CONFIG_BVME6000_SCSI
-fi
-
-if [ "$CONFIG_SUN3X" = "y" ]; then
- bool 'ESP SCSI driver' CONFIG_SUN3X_ESP
-fi
-
-endmenu
+ endmenu
fi
endmenu
if [ "$CONFIG_NET" = "y" ]; then
-mainmenu_option next_comment
-comment 'Network device support'
+ mainmenu_option next_comment
+ comment 'Network device support'
-bool 'Network device support' CONFIG_NETDEVICES
-if [ "$CONFIG_NETDEVICES" = "y" ]; then
-#
-# Network device configuration
-#
-tristate 'Dummy net driver support' CONFIG_DUMMY
-tristate 'SLIP (serial line) support' CONFIG_SLIP
-if [ "$CONFIG_SLIP" != "n" ]; then
- bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
- bool ' Keepalive and linefill' CONFIG_SLIP_SMART
- bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
-fi
-tristate 'PPP (point-to-point) support' CONFIG_PPP
-if [ ! "$CONFIG_PPP" = "n" ]; then
- comment 'CCP compressors for PPP are only built as modules.'
-fi
-tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
-if [ "$CONFIG_ZORRO" = "y" ]; then
- tristate 'Ariadne support' CONFIG_ARIADNE
- tristate 'Ariadne II support' CONFIG_ARIADNE2
- tristate 'A2065 support' CONFIG_A2065
- tristate 'Hydra support' CONFIG_HYDRA
-fi
-if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
- tristate 'PCMCIA NE2000 support' CONFIG_APNE
-fi
-if [ "$CONFIG_APOLLO" = "y" ] ; then
- tristate 'Apollo 3c505 support' CONFIG_APOLLO_ELPLUS
-fi
-if [ "$CONFIG_MAC" = "y" ]; then
- bool 'Mac NS 8390 based ethernet cards' CONFIG_DAYNAPORT
-# bool 'Macintosh (AV) onboard MACE ethernet' CONFIG_MACMACE
- bool 'Macintosh (Quadra) onboard SONIC ethernet' CONFIG_MACSONIC
-fi
-if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
- tristate 'MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET
-fi
-if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
- tristate 'MVME16x Ethernet support' CONFIG_MVME16x_NET
-fi
-if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
- tristate 'BVME6000 Ethernet support' CONFIG_BVME6000_NET
-fi
-if [ "$CONFIG_ATARI" = "y" ]; then
- tristate 'Atari Lance support' CONFIG_ATARILANCE
- if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
- tristate 'BioNet-100 support' CONFIG_ATARI_BIONET
- tristate 'PAMsNet support' CONFIG_ATARI_PAMSNET
- fi
-fi
-if [ "$CONFIG_SUN3X" = "y" ]; then
- bool 'Sun3x Lance support' CONFIG_SUNLANCE
-fi
-if [ "$CONFIG_HP300" = "y" ]; then
- bool 'HP on-board LANCE support' CONFIG_HPLANCE
-fi
-if [ "$CONFIG_Q40" = "y" ]; then
- if [ ! "$CONFIG_PARPORT" = "n" ]; then
- dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
- fi
-fi
-fi
-endmenu
+ bool 'Network device support' CONFIG_NETDEVICES
+ if [ "$CONFIG_NETDEVICES" = "y" ]; then
+ #
+ # Network device configuration
+ #
+ tristate ' Dummy net driver support' CONFIG_DUMMY
+ tristate ' SLIP (serial line) support' CONFIG_SLIP
+ if [ "$CONFIG_SLIP" != "n" ]; then
+ bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
+ bool ' Keepalive and linefill' CONFIG_SLIP_SMART
+ bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
+ fi
+ tristate ' PPP (point-to-point) support' CONFIG_PPP
+ if [ ! "$CONFIG_PPP" = "n" ]; then
+ comment 'CCP compressors for PPP are only built as modules.'
+ fi
+ tristate ' EQL (serial line load balancing) support' CONFIG_EQUALIZER
+ if [ "$CONFIG_ZORRO" = "y" ]; then
+ tristate ' Ariadne support' CONFIG_ARIADNE
+ tristate ' Ariadne II support' CONFIG_ARIADNE2
+ tristate ' A2065 support' CONFIG_A2065
+ tristate ' Hydra support' CONFIG_HYDRA
+ fi
+ if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
+ tristate ' PCMCIA NE2000 support' CONFIG_APNE
+ fi
+ if [ "$CONFIG_APOLLO" = "y" ]; then
+ tristate ' Apollo 3c505 support' CONFIG_APOLLO_ELPLUS
+ fi
+ if [ "$CONFIG_MAC" = "y" ]; then
+ bool ' Mac NS 8390 based ethernet cards' CONFIG_DAYNAPORT
+# bool ' Macintosh (AV) onboard MACE ethernet' CONFIG_MACMACE
+ bool ' Macintosh (Quadra) onboard SONIC ethernet' CONFIG_MACSONIC
+ fi
+ if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then
+ tristate ' MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET
+ fi
+ if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then
+ tristate ' MVME16x Ethernet support' CONFIG_MVME16x_NET
+ fi
+ if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then
+ tristate ' BVME6000 Ethernet support' CONFIG_BVME6000_NET
+ fi
+ if [ "$CONFIG_ATARI" = "y" ]; then
+ tristate ' Atari Lance support' CONFIG_ATARILANCE
+ if [ "$CONFIG_ATARI_ACSI" != "n" ]; then
+ tristate ' BioNet-100 support' CONFIG_ATARI_BIONET
+ tristate ' PAMsNet support' CONFIG_ATARI_PAMSNET
+ fi
+ fi
+ if [ "$CONFIG_SUN3X" = "y" ]; then
+ bool ' Sun3x Lance support' CONFIG_SUNLANCE
+ fi
+ if [ "$CONFIG_HP300" = "y" ]; then
+ bool ' HP on-board LANCE support' CONFIG_HPLANCE
+ fi
+ if [ "$CONFIG_Q40" = "y" ]; then
+ if [ ! "$CONFIG_PARPORT" = "n" ]; then
+ dep_tristate ' PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT
+ fi
+ fi
+ fi
+ endmenu
fi
@@ -303,85 +303,85 @@
fi
if [ "$CONFIG_SERIAL" = "y" ]; then
- bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE
- bool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED
+ bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE
+ bool ' Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED
fi
if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then
- bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
- bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
-# bool ' Autodetect IRQ - do not yet enable !!' CONFIG_SERIAL_DETECT_IRQ
- bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT
- bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
+ bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS
+ bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ
+# bool ' Autodetect IRQ - do not yet enable !!' CONFIG_SERIAL_DETECT_IRQ
+ bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT
+ bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6
fi
if [ "$CONFIG_VME" = "n" ]; then
- define_bool CONFIG_VT y
- if [ "$CONFIG_VT" = "y" ]; then
- bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
- fi
+ define_bool CONFIG_VT y
+ if [ "$CONFIG_VT" = "y" ]; then
+ bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
+ fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
- define_bool CONFIG_NVRAM y
+ define_bool CONFIG_NVRAM y
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
- tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE
- if [ "$CONFIG_AMIGAMOUSE" != "n" ]; then
- define_bool CONFIG_BUSMOUSE y
- fi
+ tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE
+ if [ "$CONFIG_AMIGAMOUSE" != "n" ]; then
+ define_bool CONFIG_BUSMOUSE y
+ fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
- tristate 'Atari mouse support' CONFIG_ATARIMOUSE
- if [ "$CONFIG_ATARIMOUSE" != "n" ]; then
- define_bool CONFIG_BUSMOUSE y
- fi
+ tristate 'Atari mouse support' CONFIG_ATARIMOUSE
+ if [ "$CONFIG_ATARIMOUSE" != "n" ]; then
+ define_bool CONFIG_BUSMOUSE y
+ fi
fi
if [ "$CONFIG_MAC" = "y" ]; then
bool 'Mac ADB mouse support' CONFIG_ADBMOUSE
- if [ "$CONFIG_ADBMOUSE" != "n" ]; then
- define_bool CONFIG_BUSMOUSE y
- fi
+ if [ "$CONFIG_ADBMOUSE" != "n" ]; then
+ define_bool CONFIG_BUSMOUSE y
+ fi
fi
if [ "$CONFIG_ATARI" = "y" ]; then
- tristate 'Atari MFP serial support' CONFIG_ATARI_MFPSER
- tristate 'Atari SCC serial support' CONFIG_ATARI_SCC
- if [ "$CONFIG_ATARI_SCC" = "y" -o "$CONFIG_ATARI_SCC" = "m" ]; then
- bool 'Atari SCC serial DMA support' CONFIG_ATARI_SCC_DMA
- fi
- tristate 'Atari MIDI serial support' CONFIG_ATARI_MIDI
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- tristate 'Atari DSP56k support (EXPERIMENTAL)' CONFIG_ATARI_DSP56K
- fi
+ tristate 'Atari MFP serial support' CONFIG_ATARI_MFPSER
+ tristate 'Atari SCC serial support' CONFIG_ATARI_SCC
+ if [ "$CONFIG_ATARI_SCC" = "y" -o "$CONFIG_ATARI_SCC" = "m" ]; then
+ bool ' Atari SCC serial DMA support' CONFIG_ATARI_SCC_DMA
+ fi
+ tristate 'Atari MIDI serial support' CONFIG_ATARI_MIDI
+ if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+ tristate 'Atari DSP56k support (EXPERIMENTAL)' CONFIG_ATARI_DSP56K
+ fi
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
- tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
- if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
- tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
- fi
+ tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
+ if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then
+ tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL
+ fi
fi
if [ "$CONFIG_PARPORT" = "n" ]; then
- if [ "$CONFIG_ZORRO" = "y" ]; then
- tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
- dep_tristate 'GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
- dep_tristate 'GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
- tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
- fi
+ if [ "$CONFIG_ZORRO" = "y" ]; then
+ tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
+ dep_tristate ' GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
+ dep_tristate ' GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
+ tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
+ fi
fi
if [ "$CONFIG_MAC" = "y" ]; then
- bool 'Mac SCC serial support' CONFIG_MAC_SCC
+ bool 'Mac SCC serial support' CONFIG_MAC_SCC
fi
if [ "$CONFIG_HP300" = "y" -a "$CONFIG_DIO" = "y" ]; then
- tristate 'HP DCA serial support' CONFIG_HPDCA
+ tristate 'HP DCA serial support' CONFIG_HPDCA
fi
if [ "$CONFIG_SUN3X" = "y" ]; then
- bool 'Sun3x builtin serial support' CONFIG_SUN3X_ZS
- if [ "$CONFIG_SUN3X_ZS" = "y" ]; then
- bool 'Sun keyboard support' CONFIG_SUN_KEYBOARD
- bool 'Sun mouse support' CONFIG_SUN_MOUSE
- if [ "$CONFIG_SUN_MOUSE" != "n" ]; then
- define_bool CONFIG_BUSMOUSE y
+ bool 'Sun3x builtin serial support' CONFIG_SUN3X_ZS
+ if [ "$CONFIG_SUN3X_ZS" = "y" ]; then
+ bool ' Sun keyboard support' CONFIG_SUN_KEYBOARD
+ bool ' Sun mouse support' CONFIG_SUN_MOUSE
+ if [ "$CONFIG_SUN_MOUSE" != "n" ]; then
+ define_bool CONFIG_BUSMOUSE y
fi
define_bool CONFIG_SBUS y
define_bool CONFIG_SBUSCHAR y
@@ -391,43 +391,43 @@
if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_ATARI" = "y" -o \
"$CONFIG_MAC" = "y" -o "$CONFIG_HP300" = "y" -o \
"$CONFIG_SUN3X" = "y" ]; then
- if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \
- "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \
- "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o \
- "$CONFIG_GVPIOEXT" = "y" -o "$CONFIG_MULTIFACE_III_TTY" = "y" -o \
- "$CONFIG_HPDCA" = "y" -o "$CONFIG_SUN3X_ZS" = "y" ]; then
- bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
- fi
+ if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \
+ "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \
+ "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o \
+ "$CONFIG_GVPIOEXT" = "y" -o "$CONFIG_MULTIFACE_III_TTY" = "y" -o \
+ "$CONFIG_HPDCA" = "y" -o "$CONFIG_SUN3X_ZS" = "y" ]; then
+ bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
+ fi
fi
if [ "$CONFIG_VME" = "y" ]; then
- define_bool CONFIG_SERIAL_CONSOLE y
- if [ "$CONFIG_MVME147" = "y" ]; then
- bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC
- fi
- if [ "$CONFIG_MVME16x" = "y" ]; then
- bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167
- bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC
- fi
- if [ "$CONFIG_BVME6000" = "y" ]; then
- bool 'SCC support for BVME6000 serial ports' CONFIG_BVME6000_SCC
- fi
+ define_bool CONFIG_SERIAL_CONSOLE y
+ if [ "$CONFIG_MVME147" = "y" ]; then
+ bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC
+ fi
+ if [ "$CONFIG_MVME16x" = "y" ]; then
+ bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167
+ bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC
+ fi
+ if [ "$CONFIG_BVME6000" = "y" ]; then
+ bool 'SCC support for BVME6000 serial ports' CONFIG_BVME6000_SCC
+ fi
fi
if [ "$CONFIG_APOLLO" = "y" ]; then
- bool 'Support for DN serial port (dummy)' CONFIG_SERIAL
- bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
+ bool 'Support for DN serial port (dummy)' CONFIG_SERIAL
+ bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
fi
bool 'Support for user serial device modules' CONFIG_USERIAL
bool 'Watchdog Timer Support' CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
- bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
- bool ' Software Watchdog' CONFIG_SOFT_WATCHDOG
+ bool ' Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
+ bool ' Software Watchdog' CONFIG_SOFT_WATCHDOG
fi
if [ "$CONFIG_ATARI" = "y" ]; then
- bool 'Enhanced Real Time Clock Support' CONFIG_RTC
+ bool 'Enhanced Real Time Clock Support' CONFIG_RTC
fi
bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
- int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
+ int ' Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
fi
endmenu
@@ -437,22 +437,22 @@
tristate 'Sound support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
- dep_tristate 'Amiga or Atari DMA sound support' CONFIG_DMASOUND $CONFIG_SOUND
+ dep_tristate ' Amiga or Atari DMA sound support' CONFIG_DMASOUND $CONFIG_SOUND
fi
endmenu
source fs/Config.in
if [ "$CONFIG_VME" = "n" ]; then
- mainmenu_option next_comment
- comment 'Console drivers'
- if [ "$CONFIG_HP300" = "y" ]; then
- bool 'Frame buffer support' CONFIG_FB
- else
- define_bool CONFIG_FB y
- fi
- source drivers/video/Config.in
- endmenu
+ mainmenu_option next_comment
+ comment 'Console drivers'
+ if [ "$CONFIG_HP300" = "y" ]; then
+ bool 'Frame buffer support' CONFIG_FB
+ else
+ define_bool CONFIG_FB y
+ fi
+ source drivers/video/Config.in
+ endmenu
fi
mainmenu_option next_comment
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)