patch-2.4.20 linux-2.4.20/arch/mips/ddb5xxx/ddb5074/irq.c

• Lines: 175
• Date: Thu Nov 28 15:53:09 2002
• Orig file: linux-2.4.19/arch/mips/ddb5xxx/ddb5074/irq.c
• Orig date: Wed Dec 31 16:00:00 1969

diff -urN linux-2.4.19/arch/mips/ddb5xxx/ddb5074/irq.c linux-2.4.20/arch/mips/ddb5xxx/ddb5074/irq.c
@@ -0,0 +1,174 @@
+/*
+ *  arch/mips/ddb5074/irq.c -- NEC DDB Vrc-5074 interrupt routines
+ *
+ *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
+ *                     Sony Software Development Center Europe (SDCE), Brussels
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/ptrace.h>
+#include <asm/nile4.h>
+#include <asm/ddb5xxx/ddb5xxx.h>
+#include <asm/ddb5xxx/ddb5074.h>
+
+
+extern void __init i8259_init(void);
+extern void init_i8259_irqs (void);
+extern void i8259_disable_irq(unsigned int irq_nr);
+extern void i8259_enable_irq(unsigned int irq_nr);
+
+extern asmlinkage void ddbIRQ(void);
+extern asmlinkage void i8259_do_irq(int irq, struct pt_regs *regs);
+extern asmlinkage void do_IRQ(int irq, struct pt_regs *regs);
+
+static struct irqaction irq_cascade = { no_action, 0, 0, "cascade", NULL, NULL };
+
+#define M1543_PNP_CONFIG	0x03f0	/* PnP Config Port */
+#define M1543_PNP_INDEX		0x03f0	/* PnP Index Port */
+#define M1543_PNP_DATA		0x03f1	/* PnP Data Port */
+
+#define M1543_PNP_ALT_CONFIG	0x0370	/* Alternative PnP Config Port */
+#define M1543_PNP_ALT_INDEX	0x0370	/* Alternative PnP Index Port */
+#define M1543_PNP_ALT_DATA	0x0371	/* Alternative PnP Data Port */
+
+#define M1543_INT1_MASTER_CTRL	0x0020	/* INT_1 (master) Control Register */
+#define M1543_INT1_MASTER_MASK	0x0021	/* INT_1 (master) Mask Register */
+
+#define M1543_INT1_SLAVE_CTRL	0x00a0	/* INT_1 (slave) Control Register */
+#define M1543_INT1_SLAVE_MASK	0x00a1	/* INT_1 (slave) Mask Register */
+
+#define M1543_INT1_MASTER_ELCR	0x04d0	/* INT_1 (master) Edge/Level Control */
+#define M1543_INT1_SLAVE_ELCR	0x04d1	/* INT_1 (slave) Edge/Level Control */
+
+
+static void m1543_irq_setup(void)
+{
+	/*
+	 *  The ALI M1543 has 13 interrupt inputs, IRQ1..IRQ13.  Not all
+	 *  the possible IO sources in the M1543 are in use by us.  We will
+	 *  use the following mapping:
+	 *
+	 *      IRQ1  - keyboard (default set by M1543)
+	 *      IRQ3  - reserved for UART B (default set by M1543) (note that
+	 *              the schematics for the DDB Vrc-5074 board seem to
+	 *              indicate that IRQ3 is connected to the DS1386
+	 *              watchdog timer interrupt output so we might have
+	 *              a conflict)
+	 *      IRQ4  - reserved for UART A (default set by M1543)
+	 *      IRQ5  - parallel (default set by M1543)
+	 *      IRQ8  - DS1386 time of day (RTC) interrupt
+	 *      IRQ12 - mouse
+	 */
+
+	/*
+	 *  Assing mouse interrupt to IRQ12
+	 */
+
+	/* Enter configuration mode */
+	outb(0x51, M1543_PNP_CONFIG);
+	outb(0x23, M1543_PNP_CONFIG);
+
+	/* Select logical device 7 (Keyboard) */
+	outb(0x07, M1543_PNP_INDEX);
+	outb(0x07, M1543_PNP_DATA);
+
+	/* Select IRQ12 */
+	outb(0x72, M1543_PNP_INDEX);
+	outb(0x0c, M1543_PNP_DATA);
+
+	outb(0x30, M1543_PNP_INDEX);
+	printk("device 7, 0x30: %02x\n",inb(M1543_PNP_DATA));
+
+	outb(0x70, M1543_PNP_INDEX);
+	printk("device 7, 0x70: %02x\n",inb(M1543_PNP_DATA));
+
+	/* Leave configration mode */
+	outb(0xbb, M1543_PNP_CONFIG);
+
+
+}
+
+void ddb_local0_irqdispatch(struct pt_regs *regs)
+{
+	u32 mask;
+	int nile4_irq;
+
+	mask = nile4_get_irq_stat(0);
+
+	/* Handle the timer interrupt first */
+#if 0
+	if (mask & (1 << NILE4_INT_GPT)) {
+		do_IRQ(nile4_to_irq(NILE4_INT_GPT), regs);
+		mask &= ~(1 << NILE4_INT_GPT);
+	}
+#endif
+	for (nile4_irq = 0; mask; nile4_irq++, mask >>= 1)
+		if (mask & 1) {
+			if (nile4_irq == NILE4_INT_INTE) {
+				int i8259_irq;
+
+				nile4_clear_irq(NILE4_INT_INTE);
+				i8259_irq = nile4_i8259_iack();
+				do_IRQ(i8259_irq, regs);
+			} else
+				do_IRQ(nile4_to_irq(nile4_irq), regs);
+
+		}
+}
+
+void ddb_local1_irqdispatch(void)
+{
+	printk("ddb_local1_irqdispatch called\n");
+}
+
+void ddb_buserror_irq(void)
+{
+	printk("ddb_buserror_irq called\n");
+}
+
+void ddb_8254timer_irq(void)
+{
+	printk("ddb_8254timer_irq called\n");
+}
+
+void __init ddb_irq_setup(void)
+{
+#ifdef CONFIG_REMOTE_DEBUG
+	if (remote_debug)
+		set_debug_traps();
+	breakpoint();		/* you may move this line to whereever you want :-) */
+#endif
+
+	/* setup cascade interrupts */
+	setup_irq(NILE4_IRQ_BASE  + NILE4_INT_INTE, &irq_cascade);
+	setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
+
+	set_except_vector(0, ddbIRQ);
+
+	nile4_irq_setup(NILE4_IRQ_BASE);
+	m1543_irq_setup();
+	init_i8259_irqs();
+
+
+	printk("CPU_IRQ_BASE: %d\n",CPU_IRQ_BASE);
+
+	mips_cpu_irq_init(CPU_IRQ_BASE);
+
+	printk("enabling 8259 cascade\n");
+
+	ddb5074_led_hex(0);
+
+	/* Enable the interrupt cascade */
+	nile4_enable_irq(NILE4_IRQ_BASE+IRQ_I8259_CASCADE);
+
+
+}