patch-2.4.20 linux-2.4.20/arch/parisc/config.in

• Lines: 306
• Date: Thu Nov 28 15:53:10 2002
• Orig file: linux-2.4.19/arch/parisc/config.in
• Orig date: Tue Apr 17 17:19:25 2001

diff -urN linux-2.4.19/arch/parisc/config.in linux-2.4.20/arch/parisc/config.in
@@ -16,98 +16,106 @@
 endmenu
 
 mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ] ; then
+  bool 'Set version information on all module symbols' CONFIG_MODVERSIONS
+  bool 'Kernel module loader' CONFIG_KMOD
+fi
+endmenu
+
+mainmenu_option next_comment
+comment 'Processor type'
+choice 'Processor family' \
+	"PA7000/PA7100		CONFIG_PA7100 \
+	 PA7200			CONFIG_PA7200 \
+	 PA7100LC/PA7300LC	CONFIG_PA7100LC \
+	 PA8x00			CONFIG_PA8X00" PA7000
+
+if [ "$CONFIG_PA8X00" = "y" ] ; then
+   define_bool CONFIG_PA20 y
+   bool '64-bit kernel' CONFIG_PARISC64
+   dep_bool '32-bit PDC' CONFIG_PDC_NARROW $CONFIG_PARISC64
+else
+   define_bool CONFIG_PA11 y
+fi
+endmenu
+
+mainmenu_option next_comment
 comment 'General options'
 
-# bool 'Symmetric multi-processing support' CONFIG_SMP
-define_bool CONFIG_SMP n
+bool 'Symmetric multi-processing support' CONFIG_SMP
+bool 'Chassis LCD and LED support' CONFIG_CHASSIS_LCD_LED
 
 bool 'Kernel Debugger support' CONFIG_KWDB
 # define_bool CONFIG_KWDB n
 
-# bool 'GSC/Gecko bus support' CONFIG_GSC y
-define_bool CONFIG_GSC y
-
-bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO y
-bool 'LASI I/O support' CONFIG_GSC_LASI y
-
-bool 'PCI bus support' CONFIG_PCI y
+bool 'U2/Uturn I/O MMU' CONFIG_IOMMU_CCIO
+bool 'VSC/GSC/HSC bus support' CONFIG_GSC
+dep_bool '  Lasi I/O support' CONFIG_GSC_LASI $CONFIG_GSC
+dep_bool '  Wax I/O support' CONFIG_GSC_WAX $CONFIG_GSC
+
+dep_bool 'EISA support' CONFIG_EISA $CONFIG_GSC
+define_bool CONFIG_ISA $CONFIG_EISA
+bool 'PCI support' CONFIG_PCI
 
 if [ "$CONFIG_PCI" = "y" ]; then
-	bool 'GSCtoPCI/DINO PCI support' CONFIG_GSC_DINO y
-	bool 'LBA/Elroy PCI support' CONFIG_PCI_LBA n
-fi 
+   dep_bool '  GSCtoPCI/Dino PCI support' CONFIG_GSC_DINO $CONFIG_GSC
+   bool '  LBA/Elroy PCI support' CONFIG_PCI_LBA
+   define_bool CONFIG_IOSAPIC $CONFIG_PCI_LBA
+   define_bool CONFIG_IOMMU_SBA $CONFIG_PCI_LBA
 
-if [ "$CONFIG_PCI_LBA" = "y" ]; then
-	define_bool CONFIG_IOSAPIC y
-	define_bool CONFIG_IOMMU_SBA y
-fi
+#   bool '  EPIC PCI support' CONFIG_PCI_EPIC n
+   bool '  SuperIO support' CONFIG_SUPERIO
+fi 
 
-#
-# if [ "$CONFIG_PCI_EPIC" = "y" ]; then...
-#
+source drivers/pci/Config.in
 
 endmenu
 
 mainmenu_option next_comment
-comment 'Loadable module support'
-bool 'Enable loadable module support' CONFIG_MODULES
-if [ "$CONFIG_MODULES" = "y" ]; then
-  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
-  bool 'Kernel module loader' CONFIG_KMOD
-fi
-endmenu
-
-mainmenu_option next_comment
 comment 'General setup'
 
+bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
+
 bool 'Networking support' CONFIG_NET
 
 bool 'System V IPC' CONFIG_SYSVIPC
 bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
 bool 'Sysctl support' CONFIG_SYSCTL
-tristate 'Kernel support for SOM binaries' CONFIG_BINFMT_SOM
+define_bool CONFIG_KCORE_ELF y
 tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
+tristate 'Kernel support for SOM binaries' CONFIG_BINFMT_SOM
 tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
-if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
-fi
+
+# anyone want to get ACPI working on PA/RISC?
+define_bool CONFIG_PM n
 
 endmenu
 
-##source drivers/parport/Config.in
-mainmenu_option next_comment
-comment 'Parallel port support'
+source drivers/parport/Config.in
 
-tristate 'Parallel port support' CONFIG_PARPORT
-if [ "$CONFIG_PARPORT" != "n" ]; then
-   if [ "$CONFIG_PCI" = "y" ]; then
-     dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
-     if [ "$CONFIG_PARPORT_PC" != "n" ]; then
-        bool '    Use FIFO/DMA if available' CONFIG_PARPORT_PC_FIFO
-        if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
-           bool '    SuperIO chipset support (EXPERIMENTAL)' CONFIG_PARPORT_PC_SUPERIO
-        fi
-     fi
-   fi
-   if [ "$CONFIG_GSC_LASI" = "y" ]; then
-      dep_tristate '  LASI/ASP builtin parallel-port' CONFIG_PARPORT_GSC $CONFIG_PARPORT
-   else
-      define_tristate CONFIG_PARPORT_GSC n
-   fi
+source drivers/block/Config.in
 
-   # If exactly one hardware type is selected then parport will optimise away
-   # support for loading any others.  Defeat this if the user is keen.
-   bool '  Support foreign hardware' CONFIG_PARPORT_OTHER
+source drivers/md/Config.in
 
-   bool '  IEEE 1284 transfer modes' CONFIG_PARPORT_1284
+if [ "$CONFIG_NET" = "y" ]; then
+   source net/Config.in
 fi
-endmenu
 
+if [ "$CONFIG_SUPERIO" = "y" ]; then
+    mainmenu_option next_comment
+    comment 'ATA/IDE/MFM/RLL support'
 
-source drivers/block/Config.in
+    tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
 
-if [ "$CONFIG_NET" = "y" ]; then
-  source net/Config.in
+    if [ "$CONFIG_IDE" != "n" ]; then
+      source drivers/ide/Config.in
+    else
+      define_bool CONFIG_BLK_DEV_IDE_MODES n
+      define_bool CONFIG_BLK_DEV_HD n
+    fi
+    endmenu
 fi
 
 mainmenu_option next_comment
@@ -116,90 +124,70 @@
 tristate 'SCSI support' CONFIG_SCSI
 
 if [ "$CONFIG_SCSI" != "n" ]; then
-  comment 'SCSI support type (disk, tape, CDrom)'
-
-  dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
-  if [ "$CONFIG_BLK_DEV_SD" != "n" ]; then
-    int  'Maximum number of SCSI disks that can be loaded as modules' CONFIG_SD_EXTRA_DEVS 40
-  fi
-
-  dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
-  dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
-  if [ "$CONFIG_BLK_DEV_SR" != "n" ]; then
-    bool '  Enable vendor-specific extensions (for SCSI CDROM)' CONFIG_BLK_DEV_SR_VENDOR
-    int  'Maximum number of CDROM devices that can be loaded as modules' CONFIG_SR_EXTRA_DEVS 2
-  fi
-  dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
-
-  comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
-  bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
-  bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
-
-  mainmenu_option next_comment
-  comment 'SCSI low-level drivers'
-  if [ "$CONFIG_GSC_LASI" = "y" ]; then
-    dep_tristate 'Lasi SCSI support' CONFIG_SCSI_LASI $CONFIG_SCSI
-    dep_tristate 'Zalon SCSI support' CONFIG_SCSI_ZALON $CONFIG_SCSI
-  fi
-  if [ "$CONFIG_PCI" = "y" ]; then
-    dep_tristate 'SYM53C8XX SCSI support' CONFIG_SCSI_SYM53C8XX $CONFIG_SCSI
-  fi
-  if [ "$CONFIG_SCSI_ZALON" != "n" -o "$CONFIG_SCSI_SYM53C8XX" != "n" ]; then
-    int  '  default tagged command queue depth' CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS 8
-    int  '  maximum number of queued commands' CONFIG_SCSI_NCR53C8XX_MAX_TAGS 32
-    int  '  synchronous transfers frequency in MHz' CONFIG_SCSI_NCR53C8XX_SYNC 20
-    bool '  enable profiling' CONFIG_SCSI_NCR53C8XX_PROFILE
-    bool '  use normal IO' CONFIG_SCSI_NCR53C8XX_IOMAPPED
-  fi
-  endmenu
+   source drivers/scsi/Config.in
 fi
 endmenu
 
 if [ "$CONFIG_NET" = "y" ]; then
-  mainmenu_option next_comment
-  comment 'Network device support'
+   mainmenu_option next_comment
+   comment 'Network device support'
 
-  bool 'Network device support' CONFIG_NETDEVICES
+   bool 'Network device support' CONFIG_NETDEVICES
 
-  if [ "$CONFIG_NETDEVICES" = "y" ]; then
-    if [ "$CONFIG_GSC_LASI" = "y" ]; then
-      tristate 'Lasi ethernet' CONFIG_LASI_82596
-    fi
-    source drivers/net/Config.in
-  fi
-  endmenu
+   if [ "$CONFIG_NETDEVICES" = "y" ]; then
+      source drivers/net/Config.in
+      if [ "$CONFIG_ATM" = "y" ]; then
+         source drivers/atm/Config.in
+      fi
+   fi
+   endmenu
 fi
 
+#
+# input before char - char/joystick depends on it. As does USB.
+#
+source drivers/input/Config.in
 source drivers/char/Config.in
+source drivers/hil/Config.in
+
+source drivers/media/Config.in
 
 source fs/Config.in
 
+if [ "$CONFIG_VT" = "y" ]; then
+   mainmenu_option next_comment
+   comment 'Console drivers'
+   source drivers/video/Config.in
+
+   bool 'STI console' CONFIG_STI_CONSOLE
+   if [ "$CONFIG_GSC_PS2" = "y" ]; then
+      define_bool CONFIG_DUMMY_CONSOLE y
+   fi
+   if [ "$CONFIG_STI_CONSOLE" = "y" ]; then
+      define_bool CONFIG_DUMMY_CONSOLE y
+      define_bool CONFIG_FBCON y
+      define_bool CONFIG_FBCON_FONT y
+#      define_bool CONFIG_FBCON_FONTWIDTH8_ONLY n
+      define_bool CONFIG_FONT_8x8 y
+      define_bool CONFIG_FONT_8x16 y
+      define_bool CONFIG_FONT_6x11 y
+      define_bool CONFIG_FONT_SUN12x22 y
+   fi
+   endmenu
+fi
+
 mainmenu_option next_comment
-comment 'Sound Drivers'
+comment 'Sound'
+
 tristate 'Sound card support' CONFIG_SOUND
 if [ "$CONFIG_SOUND" != "n" ]; then
    source drivers/sound/Config.in
 fi
 endmenu
 
-if [ "$CONFIG_VT" = "y" ]; then
-  mainmenu_option next_comment
-  comment 'Console drivers'
-  source drivers/video/Config.in
-
-#  bool 'IODC console' CONFIG_IODC_CONSOLE
-  bool 'STI console' CONFIG_STI_CONSOLE
-  if [ "$CONFIG_IODC_CONSOLE" = "n" ]; then
-    if [ "$CONFIG_GSC_PS2" = "y" ]; then
-      define_bool CONFIG_DUMMY_CONSOLE y
-    fi
-  fi
-  if [ "$CONFIG_STI_CONSOLE" = "y" ]; then
-    define_bool CONFIG_DUMMY_CONSOLE y
-  fi
-  endmenu
+if [ "$CONFIG_SUPERIO" = "y" ]; then
+    source drivers/usb/Config.in
 fi
-# endmenu
 
 mainmenu_option next_comment
 comment 'Kernel hacking'
@@ -208,3 +196,4 @@
 bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
 endmenu
 
+source lib/Config.in