patch-2.4.20 linux-2.4.20/arch/ppc/kernel/chrp_time.c

• Lines: 196
• Date: Wed Dec 31 16:00:00 1969
• Orig file: linux-2.4.19/arch/ppc/kernel/chrp_time.c
• Orig date: Sat Sep 8 12:38:41 2001

diff -urN linux-2.4.19/arch/ppc/kernel/chrp_time.c linux-2.4.20/arch/ppc/kernel/chrp_time.c
@@ -1,195 +0,0 @@
-/*
- * BK Id: SCCS/s.chrp_time.c 1.10 09/08/01 15:47:42 paulus
- */
-/*
- *  linux/arch/i386/kernel/time.c
- *
- *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
- *
- * Adapted for PowerPC (PreP) by Gary Thomas
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- *  copied and modified from intel version
- *
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/nvram.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/time.h>
-
-extern spinlock_t rtc_lock;
-
-static int nvram_as1 = NVRAM_AS1;
-static int nvram_as0 = NVRAM_AS0;
-static int nvram_data = NVRAM_DATA;
-
-long __init chrp_time_init(void)
-{
-	struct device_node *rtcs;
-	int base;
-
-	rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
-	if (rtcs == NULL || rtcs->addrs == NULL)
-		return 0;
-	base = rtcs->addrs[0].address;
-	nvram_as1 = 0;
-	nvram_as0 = base;
-	nvram_data = base + 1;
-	
-	return 0;
-}
-
-int __chrp chrp_cmos_clock_read(int addr)
-{
-	if (nvram_as1 != 0)
-		outb(addr>>8, nvram_as1);
-	outb(addr, nvram_as0);
-	return (inb(nvram_data));
-}
-
-void __chrp chrp_cmos_clock_write(unsigned long val, int addr)
-{
-	if (nvram_as1 != 0)
-		outb(addr>>8, nvram_as1);
-	outb(addr, nvram_as0);
-	outb(val, nvram_data);
-	return;
-}
-
-/*
- * Set the hardware clock. -- Cort
- */
-int __chrp chrp_set_rtc_time(unsigned long nowtime)
-{
-	unsigned char save_control, save_freq_select;
-	struct rtc_time tm;
-
-	spin_lock(&rtc_lock);
-	to_tm(nowtime, &tm);
-
-	save_control = chrp_cmos_clock_read(RTC_CONTROL); /* tell the clock it's being set */
-
-	chrp_cmos_clock_write((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = chrp_cmos_clock_read(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	
-	chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-        tm.tm_year -= 1900;
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
-	}
-	chrp_cmos_clock_write(tm.tm_sec,RTC_SECONDS);
-	chrp_cmos_clock_write(tm.tm_min,RTC_MINUTES);
-	chrp_cmos_clock_write(tm.tm_hour,RTC_HOURS);
-	chrp_cmos_clock_write(tm.tm_mon,RTC_MONTH);
-	chrp_cmos_clock_write(tm.tm_mday,RTC_DAY_OF_MONTH);
-	chrp_cmos_clock_write(tm.tm_year,RTC_YEAR);
-	
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	chrp_cmos_clock_write(save_control, RTC_CONTROL);
-	chrp_cmos_clock_write(save_freq_select, RTC_FREQ_SELECT);
-
-	if ( (time_state == TIME_ERROR) || (time_state == TIME_BAD) )
-		time_state = TIME_OK;
-	spin_unlock(&rtc_lock);
-	return 0;
-}
-
-unsigned long __chrp chrp_get_rtc_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-	int uip, i;
-
-	/* The Linux interpretation of the CMOS clock register contents:
-	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
-	 * RTC registers show the second which has precisely just started.
-	 * Let's hope other operating systems interpret the RTC the same way.
-	 */
-
-	/* Since the UIP flag is set for about 2.2 ms and the clock
-	 * is typically written with a precision of 1 jiffy, trying
-	 * to obtain a precision better than a few milliseconds is 
-	 * an illusion. Only consistency is interesting, this also
-	 * allows to use the routine for /dev/rtc without a potential
-	 * 1 second kernel busy loop triggered by any reader of /dev/rtc. 
-	 */
-
-	for ( i = 0; i<1000000; i++) {
-		uip = chrp_cmos_clock_read(RTC_FREQ_SELECT);
-		sec = chrp_cmos_clock_read(RTC_SECONDS);
-		min = chrp_cmos_clock_read(RTC_MINUTES);
-		hour = chrp_cmos_clock_read(RTC_HOURS);
-		day = chrp_cmos_clock_read(RTC_DAY_OF_MONTH);
-		mon = chrp_cmos_clock_read(RTC_MONTH);
-		year = chrp_cmos_clock_read(RTC_YEAR);
-		uip |= chrp_cmos_clock_read(RTC_FREQ_SELECT);
-		if ((uip & RTC_UIP)==0) break;
-	}
-
-	if (!(chrp_cmos_clock_read(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-	  {
-	    BCD_TO_BIN(sec);
-	    BCD_TO_BIN(min);
-	    BCD_TO_BIN(hour);
-	    BCD_TO_BIN(day);
-	    BCD_TO_BIN(mon);
-	    BCD_TO_BIN(year);
-	  }
-	if ((year += 1900) < 1970)
-		year += 100;
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-
-void __init chrp_calibrate_decr(void)
-{
-	struct device_node *cpu;
-	unsigned int freq, *fp;
-
-	if (via_calibrate_decr())
-		return;
-
-	/*
-	 * The cpu node should have a timebase-frequency property
-	 * to tell us the rate at which the decrementer counts.
-	 */
-	freq = 16666000;		/* hardcoded default */
-	cpu = find_type_devices("cpu");
-	if (cpu != 0) {
-		fp = (unsigned int *)
-			get_property(cpu, "timebase-frequency", NULL);
-		if (fp != 0)
-			freq = *fp;
-	}
-	printk("time_init: decrementer frequency = %u.%.6u MHz\n",
- 	       freq/1000000, freq%1000000);
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}