patch-2.4.20 linux-2.4.20/arch/ppc/kernel/pmac_feature.c
Next file: linux-2.4.20/arch/ppc/kernel/pmac_nvram.c
Previous file: linux-2.4.20/arch/ppc/kernel/pmac_backlight.c
Back to the patch index
Back to the overall index
- Lines: 2140
- Date:
Wed Dec 31 16:00:00 1969
- Orig file:
linux-2.4.19/arch/ppc/kernel/pmac_feature.c
- Orig date:
Fri Aug 2 17:39:43 2002
diff -urN linux-2.4.19/arch/ppc/kernel/pmac_feature.c linux-2.4.20/arch/ppc/kernel/pmac_feature.c
@@ -1,2139 +0,0 @@
-/*
- * BK Id: %F% %I% %G% %U% %#%
- */
-/*
- * arch/ppc/kernel/pmac_feature.c
- *
- * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
- * Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * TODO:
- *
- * - Replace mdelay with some schedule loop if possible
- * - Shorten some obfuscated delays on some routines (like modem
- * power)
- *
- */
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <asm/sections.h>
-#include <asm/errno.h>
-#include <asm/ohare.h>
-#include <asm/heathrow.h>
-#include <asm/keylargo.h>
-#include <asm/uninorth.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pmac_feature.h>
-#include <asm/dbdma.h>
-
-#undef DEBUG_FEATURE
-
-#ifdef DEBUG_FEATURE
-#define DBG(fmt,...) printk(KERN_DEBUG fmt)
-#else
-#define DBG(fmt,...)
-#endif
-
-/* Exported from arch/ppc/kernel/idle.c */
-extern unsigned long powersave_nap;
-
-/*
- * We use a single global lock to protect accesses. Each driver has
- * to take care of it's own locking
- */
-static spinlock_t feature_lock __pmacdata = SPIN_LOCK_UNLOCKED;
-
-#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags);
-#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags);
-
-/*
- * Helper functions regarding the various flavors of mac-io
- */
-
-#define MAX_MACIO_CHIPS 2
-
-enum {
- macio_unknown = 0,
- macio_grand_central,
- macio_ohare,
- macio_ohareII,
- macio_heathrow,
- macio_gatwick,
- macio_paddington,
- macio_keylargo,
- macio_pangea
-};
-
-static const char* macio_names[] __pmacdata =
-{
- "Unknown",
- "Grand Central",
- "OHare",
- "OHareII",
- "Heathrow",
- "Gatwick",
- "Paddington",
- "Keylargo",
- "Pangea"
-};
-
-static struct macio_chip
-{
- struct device_node* of_node;
- int type;
- int rev;
- volatile u32* base;
- unsigned long flags;
-} macio_chips[MAX_MACIO_CHIPS] __pmacdata;
-
-#define MACIO_FLAG_SCCA_ON 0x00000001
-#define MACIO_FLAG_SCCB_ON 0x00000002
-#define MACIO_FLAG_SCC_LOCKED 0x00000004
-#define MACIO_FLAG_AIRPORT_ON 0x00000010
-#define MACIO_FLAG_FW_SUPPORTED 0x00000020
-
-static struct macio_chip* __pmac
-macio_find(struct device_node* child, int type)
-{
- while(child) {
- int i;
-
- for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
- if (child == macio_chips[i].of_node &&
- (!type || macio_chips[i].type == type))
- return &macio_chips[i];
- child = child->parent;
- }
- return NULL;
-}
-
-#define MACIO_FCR32(macio, r) ((macio)->base + ((r) >> 2))
-#define MACIO_FCR8(macio, r) (((volatile u8*)((macio)->base)) + (r))
-
-#define MACIO_IN32(r) (in_le32(MACIO_FCR32(macio,r)))
-#define MACIO_OUT32(r,v) (out_le32(MACIO_FCR32(macio,r), (v)))
-#define MACIO_BIS(r,v) (MACIO_OUT32((r), MACIO_IN32(r) | (v)))
-#define MACIO_BIC(r,v) (MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
-#define MACIO_IN8(r) (in_8(MACIO_FCR8(macio,r)))
-#define MACIO_OUT8(r,v) (out_8(MACIO_FCR8(macio,r), (v)))
-
-/*
- * Uninorth reg. access. Note that Uni-N regs are big endian
- */
-
-#define UN_REG(r) (uninorth_base + ((r) >> 2))
-#define UN_IN(r) (in_be32(UN_REG(r)))
-#define UN_OUT(r,v) (out_be32(UN_REG(r), (v)))
-#define UN_BIS(r,v) (UN_OUT((r), UN_IN(r) | (v)))
-#define UN_BIC(r,v) (UN_OUT((r), UN_IN(r) & ~(v)))
-
-static struct device_node* uninorth_node __pmacdata;
-static u32* uninorth_base __pmacdata;
-static u32 uninorth_rev __pmacdata;
-
-
-/*
- * For each motherboard family, we have a table of functions pointers
- * that handle the various features.
- */
-
-typedef int (*feature_call)(struct device_node* node, int param, int value);
-
-struct feature_table_entry {
- unsigned int selector;
- feature_call function;
-};
-
-struct pmac_mb_def
-{
- const char* model_string;
- const char* model_name;
- int model_id;
- struct feature_table_entry* features;
- unsigned long board_flags;
-};
-static struct pmac_mb_def pmac_mb __pmacdata;
-
-/*
- * Here are the chip specific feature functions
- */
-
-static inline int __pmac
-simple_feature_tweak(struct device_node* node, int type, int reg, u32 mask, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
-
- macio = macio_find(node, type);
- if (!macio)
- return -ENODEV;
- LOCK(flags);
- if (value)
- MACIO_BIS(reg, mask);
- else
- MACIO_BIC(reg, mask);
- (void)MACIO_IN32(reg);
- UNLOCK(flags);
-
- return 0;
-}
-
-static int __pmac
-ohare_htw_scc_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long chan_mask;
- unsigned long fcr;
- unsigned long flags;
- int htw, trans;
- unsigned long rmask;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
- if (!strcmp(node->name, "ch-a"))
- chan_mask = MACIO_FLAG_SCCA_ON;
- else if (!strcmp(node->name, "ch-b"))
- chan_mask = MACIO_FLAG_SCCB_ON;
- else
- return -ENODEV;
-
- htw = (macio->type == macio_heathrow || macio->type == macio_paddington
- || macio->type == macio_gatwick);
- /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
- trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
- pmac_mb.model_id != PMAC_TYPE_YIKES);
- if (value) {
-#ifdef CONFIG_ADB_PMU
- if ((param & 0xfff) == PMAC_SCC_IRDA)
- pmu_enable_irled(1);
-#endif /* CONFIG_ADB_PMU */
- LOCK(flags);
- fcr = MACIO_IN32(OHARE_FCR);
- /* Check if scc cell need enabling */
- if (!(fcr & OH_SCC_ENABLE)) {
- fcr |= OH_SCC_ENABLE;
- if (htw) {
- /* Side effect: this will also power up the
- * modem, but it's too messy to figure out on which
- * ports this controls the tranceiver and on which
- * it controls the modem
- */
- if (trans)
- fcr &= ~HRW_SCC_TRANS_EN_N;
- MACIO_OUT32(OHARE_FCR, fcr);
- fcr |= (rmask = HRW_RESET_SCC);
- MACIO_OUT32(OHARE_FCR, fcr);
- } else {
- fcr |= (rmask = OH_SCC_RESET);
- MACIO_OUT32(OHARE_FCR, fcr);
- }
- UNLOCK(flags);
- (void)MACIO_IN32(OHARE_FCR);
- mdelay(15);
- LOCK(flags);
- fcr &= ~rmask;
- MACIO_OUT32(OHARE_FCR, fcr);
- }
- if (chan_mask & MACIO_FLAG_SCCA_ON)
- fcr |= OH_SCCA_IO;
- if (chan_mask & MACIO_FLAG_SCCB_ON)
- fcr |= OH_SCCB_IO;
- MACIO_OUT32(OHARE_FCR, fcr);
- macio->flags |= chan_mask;
- UNLOCK(flags);
- if (param & PMAC_SCC_FLAG_XMON)
- macio->flags |= MACIO_FLAG_SCC_LOCKED;
- } else {
- if (macio->flags & MACIO_FLAG_SCC_LOCKED)
- return -EPERM;
- LOCK(flags);
- fcr = MACIO_IN32(OHARE_FCR);
- if (chan_mask & MACIO_FLAG_SCCA_ON)
- fcr &= ~OH_SCCA_IO;
- if (chan_mask & MACIO_FLAG_SCCB_ON)
- fcr &= ~OH_SCCB_IO;
- MACIO_OUT32(OHARE_FCR, fcr);
- if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
- fcr &= ~OH_SCC_ENABLE;
- if (htw && trans)
- fcr |= HRW_SCC_TRANS_EN_N;
- MACIO_OUT32(OHARE_FCR, fcr);
- }
- macio->flags &= ~(chan_mask);
- UNLOCK(flags);
- mdelay(10);
-#ifdef CONFIG_ADB_PMU
- if ((param & 0xfff) == PMAC_SCC_IRDA)
- pmu_enable_irled(0);
-#endif /* CONFIG_ADB_PMU */
- }
- return 0;
-}
-
-static int __pmac
-ohare_floppy_enable(struct device_node* node, int param, int value)
-{
- return simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_FLOPPY_ENABLE, value);
-}
-
-static int __pmac
-ohare_mesh_enable(struct device_node* node, int param, int value)
-{
- return simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_MESH_ENABLE, value);
-}
-
-static int __pmac
-ohare_ide_enable(struct device_node* node, int param, int value)
-{
- switch(param) {
- case 0:
- /* For some reason, setting the bit in set_initial_features()
- * doesn't stick. I'm still investigating... --BenH.
- */
- if (value)
- simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_IOBUS_ENABLE, 1);
- return simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_IDE0_ENABLE, value);
- case 1:
- return simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_BAY_IDE_ENABLE, value);
- default:
- return -ENODEV;
- }
-}
-
-static int __pmac
-ohare_ide_reset(struct device_node* node, int param, int value)
-{
- switch(param) {
- case 0:
- return simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_IDE0_RESET_N, !value);
- case 1:
- return simple_feature_tweak(node, macio_ohare,
- OHARE_FCR, OH_IDE1_RESET_N, !value);
- default:
- return -ENODEV;
- }
-}
-
-static int __pmac
-ohare_sleep_state(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio = &macio_chips[0];
-
- if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
- return -EPERM;
- if (value == 1) {
- MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
- } else if (value == 0) {
- MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
- }
-
- return 0;
-}
-
-static int __pmac
-heathrow_modem_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- u8 gpio;
- unsigned long flags;
-
- macio = macio_find(node, macio_unknown);
- if (!macio)
- return -ENODEV;
- gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
- if (!value) {
- LOCK(flags);
- MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
- UNLOCK(flags);
- (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
- mdelay(250);
- }
- if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
- pmac_mb.model_id != PMAC_TYPE_YIKES) {
- LOCK(flags);
- if (value)
- MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
- else
- MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
- UNLOCK(flags);
- (void)MACIO_IN32(HEATHROW_FCR);
- mdelay(250);
- }
- if (value) {
- LOCK(flags);
- MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
- (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250); LOCK(flags);
- MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
- (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250); LOCK(flags);
- MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
- (void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250);
- }
- return 0;
-}
-
-static int __pmac
-heathrow_floppy_enable(struct device_node* node, int param, int value)
-{
- return simple_feature_tweak(node, macio_unknown,
- HEATHROW_FCR,
- HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
- value);
-}
-
-static int __pmac
-heathrow_mesh_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
-
- macio = macio_find(node, macio_unknown);
- if (!macio)
- return -ENODEV;
- LOCK(flags);
- /* Set clear mesh cell enable */
- if (value)
- MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
- else
- MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
- (void)MACIO_IN32(HEATHROW_FCR);
- udelay(10);
- /* Set/Clear termination power (todo: test ! the bit value
- * used by Darwin doesn't seem to match what we used so
- * far. If you experience problems, turn #if 1 into #if 0
- * and tell me about it --BenH.
- */
-#if 1
- if (value)
- MACIO_BIC(HEATHROW_MBCR, 0x00000004);
- else
- MACIO_BIS(HEATHROW_MBCR, 0x00000004);
-#else
- if (value)
- MACIO_BIC(HEATHROW_MBCR, 0x00040000);
- else
- MACIO_BIS(HEATHROW_MBCR, 0x00040000);
-#endif
- (void)MACIO_IN32(HEATHROW_MBCR);
- udelay(10);
- UNLOCK(flags);
-
- return 0;
-}
-
-static int __pmac
-heathrow_ide_enable(struct device_node* node, int param, int value)
-{
- switch(param) {
- case 0:
- return simple_feature_tweak(node, macio_unknown,
- HEATHROW_FCR, HRW_IDE0_ENABLE, value);
- case 1:
- return simple_feature_tweak(node, macio_unknown,
- HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
- default:
- return -ENODEV;
- }
-}
-
-static int __pmac
-heathrow_ide_reset(struct device_node* node, int param, int value)
-{
- switch(param) {
- case 0:
- return simple_feature_tweak(node, macio_unknown,
- HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
- case 1:
- return simple_feature_tweak(node, macio_unknown,
- HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
- default:
- return -ENODEV;
- }
-}
-
-static int __pmac
-heathrow_bmac_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
- if (value) {
- LOCK(flags);
- MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
- MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
- UNLOCK(flags);
- (void)MACIO_IN32(HEATHROW_FCR);
- mdelay(10);
- LOCK(flags);
- MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
- UNLOCK(flags);
- (void)MACIO_IN32(HEATHROW_FCR);
- mdelay(10);
- } else {
- LOCK(flags);
- MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
- UNLOCK(flags);
- }
- return 0;
-}
-
-static int __pmac
-heathrow_sound_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
-
- /* B&W G3 and Yikes don't support that properly (the
- * sound appear to never come back after beeing shut down).
- */
- if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
- pmac_mb.model_id == PMAC_TYPE_YIKES)
- return 0;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
- if (value) {
- LOCK(flags);
- MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
- MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
- UNLOCK(flags);
- (void)MACIO_IN32(HEATHROW_FCR);
- } else {
- LOCK(flags);
- MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
- MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
- UNLOCK(flags);
- }
- return 0;
-}
-
-static u32 save_fcr[5] __pmacdata;
-static u32 save_mbcr __pmacdata;
-static u32 save_gpio_levels[2] __pmacdata;
-static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT] __pmacdata;
-static u8 save_gpio_normal[KEYLARGO_GPIO_CNT] __pmacdata;
-static u32 save_unin_clock_ctl __pmacdata;
-static struct dbdma_regs save_dbdma[13] __pmacdata;
-static struct dbdma_regs save_alt_dbdma[13] __pmacdata;
-
-static void __pmac
-dbdma_save(struct macio_chip* macio, struct dbdma_regs* save)
-{
- int i;
-
- /* Save state & config of DBDMA channels */
- for (i=0; i<13; i++) {
- volatile struct dbdma_regs* chan = (volatile struct dbdma_regs*)
- (macio->base + ((0x8000+i*0x100)>>2));
- save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
- save[i].cmdptr = in_le32(&chan->cmdptr);
- save[i].intr_sel = in_le32(&chan->intr_sel);
- save[i].br_sel = in_le32(&chan->br_sel);
- save[i].wait_sel = in_le32(&chan->wait_sel);
- }
-}
-
-static void __pmac
-dbdma_restore(struct macio_chip* macio, struct dbdma_regs* save)
-{
- int i;
-
- /* Save state & config of DBDMA channels */
- for (i=0; i<13; i++) {
- volatile struct dbdma_regs* chan = (volatile struct dbdma_regs*)
- (macio->base + ((0x8000+i*0x100)>>2));
- out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
- while (in_le32(&chan->status) & ACTIVE)
- mb();
- out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
- out_le32(&chan->cmdptr, save[i].cmdptr);
- out_le32(&chan->intr_sel, save[i].intr_sel);
- out_le32(&chan->br_sel, save[i].br_sel);
- out_le32(&chan->wait_sel, save[i].wait_sel);
- }
-}
-
-static void __pmac
-heathrow_sleep(struct macio_chip* macio, int secondary)
-{
- if (secondary) {
- dbdma_save(macio, save_alt_dbdma);
- save_fcr[2] = MACIO_IN32(0x38);
- save_fcr[3] = MACIO_IN32(0x3c);
- } else {
- dbdma_save(macio, save_dbdma);
- save_fcr[0] = MACIO_IN32(0x38);
- save_fcr[1] = MACIO_IN32(0x3c);
- save_mbcr = MACIO_IN32(0x34);
- /* Make sure sound is shut down */
- MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
- MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
- /* This seems to be necessary as well or the fan
- * keeps coming up and battery drains fast */
- MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
- /* Make sure eth is down even if module or sleep
- * won't work properly */
- MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
- }
- /* Make sure modem is shut down */
- MACIO_OUT8(HRW_GPIO_MODEM_RESET,
- MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
- MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
- MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
-
- /* Let things settle */
- (void)MACIO_IN32(HEATHROW_FCR);
- mdelay(1);
-}
-
-static void __pmac
-heathrow_wakeup(struct macio_chip* macio, int secondary)
-{
- if (secondary) {
- MACIO_OUT32(0x38, save_fcr[2]);
- (void)MACIO_IN32(0x38);
- mdelay(1);
- MACIO_OUT32(0x3c, save_fcr[3]);
- (void)MACIO_IN32(0x38);
- mdelay(10);
- dbdma_restore(macio, save_alt_dbdma);
- } else {
- MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
- (void)MACIO_IN32(0x38);
- mdelay(1);
- MACIO_OUT32(0x3c, save_fcr[1]);
- (void)MACIO_IN32(0x38);
- mdelay(1);
- MACIO_OUT32(0x34, save_mbcr);
- (void)MACIO_IN32(0x38);
- mdelay(10);
- dbdma_restore(macio, save_dbdma);
- }
-}
-
-static int __pmac
-heathrow_sleep_state(struct device_node* node, int param, int value)
-{
- if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
- return -EPERM;
- if (value == 1) {
- if (macio_chips[1].type == macio_gatwick)
- heathrow_sleep(&macio_chips[0], 1);
- heathrow_sleep(&macio_chips[0], 0);
- } else if (value == 0) {
- heathrow_wakeup(&macio_chips[0], 0);
- if (macio_chips[1].type == macio_gatwick)
- heathrow_wakeup(&macio_chips[0], 1);
- }
- return 0;
-}
-
-static int __pmac
-core99_scc_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
- unsigned long chan_mask;
- u32 fcr;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
- if (!strcmp(node->name, "ch-a"))
- chan_mask = MACIO_FLAG_SCCA_ON;
- else if (!strcmp(node->name, "ch-b"))
- chan_mask = MACIO_FLAG_SCCB_ON;
- else
- return -ENODEV;
-
- if (value) {
- int need_reset_scc = 0;
- int need_reset_irda = 0;
-
- LOCK(flags);
- fcr = MACIO_IN32(KEYLARGO_FCR0);
- /* Check if scc cell need enabling */
- if (!(fcr & KL0_SCC_CELL_ENABLE)) {
- fcr |= KL0_SCC_CELL_ENABLE;
- need_reset_scc = 1;
- }
- if (chan_mask & MACIO_FLAG_SCCA_ON) {
- fcr |= KL0_SCCA_ENABLE;
- /* Don't enable line drivers for I2S modem */
- if ((param & 0xfff) == PMAC_SCC_I2S1)
- fcr &= ~KL0_SCC_A_INTF_ENABLE;
- else
- fcr |= KL0_SCC_A_INTF_ENABLE;
- }
- if (chan_mask & MACIO_FLAG_SCCB_ON) {
- fcr |= KL0_SCCB_ENABLE;
- /* Perform irda specific inits */
- if ((param & 0xfff) == PMAC_SCC_IRDA) {
- fcr &= ~KL0_SCC_B_INTF_ENABLE;
- fcr |= KL0_IRDA_ENABLE;
- fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
- fcr |= KL0_IRDA_SOURCE1_SEL;
- fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
- fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
- need_reset_irda = 1;
- } else
- fcr |= KL0_SCC_B_INTF_ENABLE;
- }
- MACIO_OUT32(KEYLARGO_FCR0, fcr);
- macio->flags |= chan_mask;
- if (need_reset_scc) {
- MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
- (void)MACIO_IN32(KEYLARGO_FCR0);
- UNLOCK(flags);
- mdelay(15);
- LOCK(flags);
- MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
- }
- if (need_reset_irda) {
- MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
- (void)MACIO_IN32(KEYLARGO_FCR0);
- UNLOCK(flags);
- mdelay(15);
- LOCK(flags);
- MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
- }
- UNLOCK(flags);
- if (param & PMAC_SCC_FLAG_XMON)
- macio->flags |= MACIO_FLAG_SCC_LOCKED;
- } else {
- if (macio->flags & MACIO_FLAG_SCC_LOCKED)
- return -EPERM;
- LOCK(flags);
- fcr = MACIO_IN32(KEYLARGO_FCR0);
- if (chan_mask & MACIO_FLAG_SCCA_ON)
- fcr &= ~KL0_SCCA_ENABLE;
- if (chan_mask & MACIO_FLAG_SCCB_ON) {
- fcr &= ~KL0_SCCB_ENABLE;
- /* Perform irda specific clears */
- if ((param & 0xfff) == PMAC_SCC_IRDA) {
- fcr &= ~KL0_IRDA_ENABLE;
- fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
- fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
- fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
- }
- }
- MACIO_OUT32(KEYLARGO_FCR0, fcr);
- if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
- fcr &= ~KL0_SCC_CELL_ENABLE;
- MACIO_OUT32(KEYLARGO_FCR0, fcr);
- }
- macio->flags &= ~(chan_mask);
- UNLOCK(flags);
- mdelay(10);
- }
- return 0;
-}
-
-static int __pmac
-core99_modem_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- u8 gpio;
- unsigned long flags;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
- gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
- gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
- gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
-
- if (!value) {
- LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
- UNLOCK(flags);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- mdelay(250);
- }
- LOCK(flags);
- if (value) {
- MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
- UNLOCK(flags);
- (void)MACIO_IN32(KEYLARGO_FCR2);
- mdelay(250);
- } else {
- MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
- UNLOCK(flags);
- }
- if (value) {
- LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250); LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250); LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250);
- }
- return 0;
-}
-
-static int __pmac
-core99_ide_enable(struct device_node* node, int param, int value)
-{
- switch(param) {
- case 0:
- return simple_feature_tweak(node, macio_unknown,
- KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
- case 1:
- return simple_feature_tweak(node, macio_unknown,
- KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
- case 2:
- return simple_feature_tweak(node, macio_unknown,
- KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
- default:
- return -ENODEV;
- }
-}
-
-static int __pmac
-core99_ide_reset(struct device_node* node, int param, int value)
-{
- switch(param) {
- case 0:
- return simple_feature_tweak(node, macio_unknown,
- KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
- case 1:
- return simple_feature_tweak(node, macio_unknown,
- KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
- case 2:
- return simple_feature_tweak(node, macio_unknown,
- KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
- default:
- return -ENODEV;
- }
-}
-
-static int __pmac
-core99_gmac_enable(struct device_node* node, int param, int value)
-{
- unsigned long flags;
-
- LOCK(flags);
- if (value)
- UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
- else
- UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
- (void)UN_IN(UNI_N_CLOCK_CNTL);
- UNLOCK(flags);
- udelay(20);
-
- return 0;
-}
-
-static int __pmac
-core99_gmac_phy_reset(struct device_node* node, int param, int value)
-{
- unsigned long flags;
- struct macio_chip* macio;
-
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
-
- LOCK(flags);
- MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
- (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
- UNLOCK(flags);
- mdelay(10);
- LOCK(flags);
- MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE
- | KEYLARGO_GPIO_OUTOUT_DATA);
- UNLOCK(flags);
- mdelay(10);
-
- return 0;
-}
-
-static int __pmac
-core99_sound_chip_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
-
- /* Do a better probe code, screamer G4 desktops &
- * iMacs can do that too, add a recalibrate in
- * the driver as well
- */
- if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
- pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
- LOCK(flags);
- if (value)
- MACIO_OUT8(KL_GPIO_SOUND_POWER,
- KEYLARGO_GPIO_OUTPUT_ENABLE |
- KEYLARGO_GPIO_OUTOUT_DATA);
- else
- MACIO_OUT8(KL_GPIO_SOUND_POWER,
- KEYLARGO_GPIO_OUTPUT_ENABLE);
- (void)MACIO_IN8(KL_GPIO_SOUND_POWER);
- UNLOCK(flags);
- }
- return 0;
-}
-
-static int __pmac
-core99_airport_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
- int state;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
-
- /* Hint: we allow passing of macio itself for the sake of the
- * sleep code
- */
- if (node != macio->of_node &&
- (!node->parent || node->parent != macio->of_node))
- return -ENODEV;
- state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
- if (value == state)
- return 0;
- if (value) {
- /* This code is a reproduction of OF enable-cardslot
- * and init-wireless methods, slightly hacked until
- * I got it working.
- */
- LOCK(flags);
- MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
- (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
- UNLOCK(flags);
- mdelay(10);
- LOCK(flags);
- MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
- (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
- UNLOCK(flags);
-
- mdelay(10);
-
- LOCK(flags);
- MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
- (void)MACIO_IN32(KEYLARGO_FCR2);
- udelay(10);
- MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
- (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
- udelay(10);
- MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
- (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
- udelay(10);
- MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
- (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
- udelay(10);
- MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
- (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
- udelay(10);
- MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
- (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
- UNLOCK(flags);
- udelay(10);
- MACIO_OUT32(0x1c000, 0);
- mdelay(1);
- MACIO_OUT8(0x1a3e0, 0x41);
- (void)MACIO_IN8(0x1a3e0);
- udelay(10);
- LOCK(flags);
- MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
- (void)MACIO_IN32(KEYLARGO_FCR2);
- UNLOCK(flags);
- mdelay(100);
-
- macio->flags |= MACIO_FLAG_AIRPORT_ON;
- } else {
- LOCK(flags);
- MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
- (void)MACIO_IN32(KEYLARGO_FCR2);
- MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
- MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
- MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
- MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
- MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
- (void)MACIO_IN8(KL_GPIO_AIRPORT_4);
- UNLOCK(flags);
-
- macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
- }
- return 0;
-}
-
-#ifdef CONFIG_SMP
-static int __pmac
-core99_reset_cpu(struct device_node* node, int param, int value)
-{
- const int reset_lines[] = { KL_GPIO_RESET_CPU0,
- KL_GPIO_RESET_CPU1,
- KL_GPIO_RESET_CPU2,
- KL_GPIO_RESET_CPU3 };
- int reset_io;
- unsigned long flags;
- struct macio_chip* macio;
-
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
- if (param > 3 || param < 0)
- return -ENODEV;
-
- reset_io = reset_lines[param];
-
- LOCK(flags);
- MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
- (void)MACIO_IN8(reset_io);
- udelay(1);
- MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
- (void)MACIO_IN8(reset_io);
- UNLOCK(flags);
-
- return 0;
-}
-#endif /* CONFIG_SMP */
-
-static int __pmac
-core99_usb_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- unsigned long flags;
- char* prop;
- int number;
- u32 reg;
-
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
-
- prop = (char *)get_property(node, "AAPL,clock-id", NULL);
- if (!prop)
- return -ENODEV;
- if (strncmp(prop, "usb0u048", strlen("usb0u048")) == 0)
- number = 0;
- else if (strncmp(prop, "usb1u148", strlen("usb1u148")) == 0)
- number = 2;
- else
- return -ENODEV;
-
- /* Sorry for the brute-force locking, but this is only used during
- * sleep and the timing seem to be critical
- */
- LOCK(flags);
- if (value) {
- /* Turn ON */
- if (number == 0) {
- MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
- (void)MACIO_IN32(KEYLARGO_FCR0);
- UNLOCK(flags);
- mdelay(1);
- LOCK(flags);
- MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
- } else {
- MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
- UNLOCK(flags);
- (void)MACIO_IN32(KEYLARGO_FCR0);
- mdelay(1);
- LOCK(flags);
- MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
- }
- reg = MACIO_IN32(KEYLARGO_FCR4);
- reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
- KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
- reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
- KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
- MACIO_OUT32(KEYLARGO_FCR4, reg);
- (void)MACIO_IN32(KEYLARGO_FCR4);
- udelay(10);
- } else {
- /* Turn OFF */
- reg = MACIO_IN32(KEYLARGO_FCR4);
- reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
- KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
- reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
- KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
- MACIO_OUT32(KEYLARGO_FCR4, reg);
- (void)MACIO_IN32(KEYLARGO_FCR4);
- udelay(1);
- if (number == 0) {
- MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
- (void)MACIO_IN32(KEYLARGO_FCR0);
- udelay(1);
- MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
- (void)MACIO_IN32(KEYLARGO_FCR0);
- } else {
- MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
- (void)MACIO_IN32(KEYLARGO_FCR0);
- udelay(1);
- MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
- (void)MACIO_IN32(KEYLARGO_FCR0);
- }
- udelay(1);
- }
- UNLOCK(flags);
-
- return 0;
-}
-
-static int __pmac
-core99_firewire_enable(struct device_node* node, int param, int value)
-{
- unsigned long flags;
- struct macio_chip* macio;
-
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
- if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
- return -ENODEV;
-
- LOCK(flags);
- if (value) {
- UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
- (void)UN_IN(UNI_N_CLOCK_CNTL);
- } else {
- UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
- (void)UN_IN(UNI_N_CLOCK_CNTL);
- }
- UNLOCK(flags);
- mdelay(1);
-
- return 0;
-}
-
-static int __pmac
-core99_firewire_cable_power(struct device_node* node, int param, int value)
-{
- unsigned long flags;
- struct macio_chip* macio;
-
- /* Trick: we allow NULL node */
- if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
- return -ENODEV;
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
- if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
- return -ENODEV;
-
- LOCK(flags);
- if (value) {
- MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
- MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
- udelay(10);
- } else {
- MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
- MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
- }
- UNLOCK(flags);
- mdelay(1);
-
- return 0;
-}
-
-static int __pmac
-core99_read_gpio(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio = &macio_chips[0];
-
- return MACIO_IN8(param);
-}
-
-
-static int __pmac
-core99_write_gpio(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio = &macio_chips[0];
-
- MACIO_OUT8(param, (u8)(value & 0xff));
- return 0;
-}
-
-static void __pmac
-keylargo_shutdown(struct macio_chip* macio, int restart)
-{
- u32 temp;
-
- mdelay(1);
- MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
- (void)MACIO_IN32(KEYLARGO_FCR0);
- mdelay(100);
-
- MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
- KL0_SCC_CELL_ENABLE |
- KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
- KL0_IRDA_CLK19_ENABLE);
-
- (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
- MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
- (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
-
- MACIO_BIC(KEYLARGO_FCR1,
- KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
- KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
- KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
- KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
- KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
- KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
- KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
- KL1_UIDE_ENABLE);
- (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
-
- MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
- udelay(10);
- MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
- udelay(10);
- temp = MACIO_IN32(KEYLARGO_FCR3);
- if (macio->rev >= 2)
- temp |= (KL3_SHUTDOWN_PLL2X | KL3_SHUTDOWN_PLL_TOTAL);
-
- temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
- KL3_SHUTDOWN_PLLKW35 | KL3_SHUTDOWN_PLLKW12;
- temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
- | KL3_CLK31_ENABLE | KL3_TIMER_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE
- | KL3_I2S0_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
- MACIO_OUT32(KEYLARGO_FCR3, temp);
- (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
-}
-
-static void __pmac
-pangea_shutdown(struct macio_chip* macio, int restart)
-{
- u32 temp;
-
- MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
- KL0_SCC_CELL_ENABLE |
- KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
-
- (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
- MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
- (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
-
- MACIO_BIC(KEYLARGO_FCR1,
- KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
- KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
- KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
- KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
- KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
- KL1_UIDE_ENABLE);
- (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
-
- MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
- udelay(10);
- temp = MACIO_IN32(KEYLARGO_FCR3);
- temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
- KL3_SHUTDOWN_PLLKW35;
- temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
- | KL3_CLK31_ENABLE | KL3_TIMER_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE
- | KL3_I2S0_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
- MACIO_OUT32(KEYLARGO_FCR3, temp);
- (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
-}
-
-static int __pmac
-core99_sleep(void)
-{
- struct macio_chip* macio;
- int i;
-
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
-
- /* We power off the wireless slot in case it was not done
- * by the driver. We don't power it on automatically however
- */
- if (macio->flags & MACIO_FLAG_AIRPORT_ON)
- core99_airport_enable(macio->of_node, 0, 0);
-
- /* We power off the FW cable. Should be done by the driver... */
- if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
- core99_firewire_enable(NULL, 0, 0);
- core99_firewire_cable_power(NULL, 0, 0);
- }
-
- /* We make sure int. modem is off (in case driver lost it) */
- core99_modem_enable(macio->of_node, 0, 0);
- /* We make sure the sound is off as well */
- core99_sound_chip_enable(macio->of_node, 0, 0);
-
- /*
- * Save various bits of KeyLargo
- */
-
- /* Save the state of the various GPIOs */
- save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
- save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
- for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
- save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
- for (i=0; i<KEYLARGO_GPIO_CNT; i++)
- save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
-
- /* Save the FCRs */
- save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
- save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
- save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
- save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
- save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
- save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
-
- /* Save state & config of DBDMA channels */
- dbdma_save(macio, save_dbdma);
-
- /*
- * Turn off as much as we can
- */
- if (macio->type == macio_pangea)
- pangea_shutdown(macio, 0);
- else if (macio->type == macio_keylargo)
- keylargo_shutdown(macio, 0);
-
- /*
- * Put the host bridge to sleep
- */
-
- save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
- UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
- ~(UNI_N_CLOCK_CNTL_GMAC|UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
- udelay(100);
- UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
- UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
-
- /*
- * FIXME: A bit of black magic with OpenPIC (don't ask me why)
- */
- if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
- MACIO_BIS(0x506e0, 0x00400000);
- MACIO_BIS(0x506e0, 0x80000000);
- }
- return 0;
-}
-
-static int __pmac
-core99_wake_up(void)
-{
- struct macio_chip* macio;
- int i;
-
- macio = &macio_chips[0];
- if (macio->type != macio_keylargo && macio->type != macio_pangea)
- return -ENODEV;
-
- /*
- * Wakeup the host bridge
- */
- UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
- udelay(10);
- UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
- udelay(10);
-
- /*
- * Restore KeyLargo
- */
-
- MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
- (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
- MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
- (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
- MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
- (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
- MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
- (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
- MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
- (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
- MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
- (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
-
- dbdma_restore(macio, save_dbdma);
-
- MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
- MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
- for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
- MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
- for (i=0; i<KEYLARGO_GPIO_CNT; i++)
- MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
-
- /* FIXME more black magic with OpenPIC ... */
- if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
- MACIO_BIC(0x506e0, 0x00400000);
- MACIO_BIC(0x506e0, 0x80000000);
- }
-
- UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
- udelay(100);
-
- return 0;
-}
-
-static int __pmac
-core99_sleep_state(struct device_node* node, int param, int value)
-{
- if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
- return -EPERM;
- if (value == 1)
- return core99_sleep();
- else if (value == 0)
- return core99_wake_up();
- return 0;
-}
-
-static int __pmac
-pangea_modem_enable(struct device_node* node, int param, int value)
-{
- struct macio_chip* macio;
- u8 gpio;
- unsigned long flags;
-
- macio = macio_find(node, 0);
- if (!macio)
- return -ENODEV;
- gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
- gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
- gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
-
- if (!value) {
- LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
- UNLOCK(flags);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- mdelay(250);
- }
- LOCK(flags);
- if (value) {
- MACIO_OUT8(KL_GPIO_MODEM_POWER,
- KEYLARGO_GPIO_OUTPUT_ENABLE);
- UNLOCK(flags);
- (void)MACIO_IN32(KEYLARGO_FCR2);
- mdelay(250);
- } else {
- MACIO_OUT8(KL_GPIO_MODEM_POWER,
- KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
- UNLOCK(flags);
- }
- if (value) {
- LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250); LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250); LOCK(flags);
- MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
- (void)MACIO_IN8(KL_GPIO_MODEM_RESET);
- UNLOCK(flags); mdelay(250);
- }
- return 0;
-}
-
-
-static int __pmac
-generic_get_mb_info(struct device_node* node, int param, int value)
-{
- switch(param) {
- case PMAC_MB_INFO_MODEL:
- return pmac_mb.model_id;
- case PMAC_MB_INFO_FLAGS:
- return pmac_mb.board_flags;
- case PMAC_MB_INFO_NAME:
- /* hack hack hack... but should work */
- *((const char **)value) = pmac_mb.model_name;
- break;
- }
- return 0;
-}
-
-
-/*
- * Table definitions
- */
-
-/* Used on any machine
- */
-static struct feature_table_entry any_features[] __pmacdata = {
- { PMAC_FTR_GET_MB_INFO, generic_get_mb_info },
- { 0, NULL }
-};
-
-/* OHare based motherboards. Currently, we only use these on the
- * 2400,3400 and 3500 series powerbooks. Some older desktops seem
- * to have issues with turning on/off those asic cells
- */
-static struct feature_table_entry ohare_features[] __pmacdata = {
- { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
- { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable },
- { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable },
- { PMAC_FTR_IDE_ENABLE, ohare_ide_enable},
- { PMAC_FTR_IDE_RESET, ohare_ide_reset},
- { PMAC_FTR_SLEEP_STATE, ohare_sleep_state },
- { 0, NULL }
-};
-
-/* Heathrow desktop machines (Beige G3).
- * Separated as some features couldn't be properly tested
- * and the serial port control bits appear to confuse it.
- */
-static struct feature_table_entry heathrow_desktop_features[] __pmacdata = {
- { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
- { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
- { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
- { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
- { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
- { 0, NULL }
-};
-
-/* Heathrow based laptop, that is the Wallstreet and mainstreet
- * powerbooks.
- */
-static struct feature_table_entry heathrow_laptop_features[] __pmacdata = {
- { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
- { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
- { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
- { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
- { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
- { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
- { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
- { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
- { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
- { 0, NULL }
-};
-
-/* Paddington based machines
- * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
- */
-static struct feature_table_entry paddington_features[] __pmacdata = {
- { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable },
- { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable },
- { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable },
- { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable },
- { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable },
- { PMAC_FTR_IDE_RESET, heathrow_ide_reset },
- { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable },
- { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable },
- { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state },
- { 0, NULL }
-};
-
-/* Core99 & MacRISC 2 machines (all machines released since the
- * iBook (included), that is all AGP machines, except pangea
- * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
- * used on iBook2 & iMac "flow power".
- */
-static struct feature_table_entry core99_features[] __pmacdata = {
- { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
- { PMAC_FTR_MODEM_ENABLE, core99_modem_enable },
- { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
- { PMAC_FTR_IDE_RESET, core99_ide_reset },
- { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
- { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
- { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
- { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
- { PMAC_FTR_USB_ENABLE, core99_usb_enable },
- { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
- { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
- { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
-#ifdef CONFIG_SMP
- { PMAC_FTR_RESET_CPU, core99_reset_cpu },
-#endif /* CONFIG_SMP */
- { PMAC_FTR_READ_GPIO, core99_read_gpio },
- { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
- { 0, NULL }
-};
-
-/* Pangea features
- */
-static struct feature_table_entry pangea_features[] __pmacdata = {
- { PMAC_FTR_SCC_ENABLE, core99_scc_enable },
- { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable },
- { PMAC_FTR_IDE_ENABLE, core99_ide_enable },
- { PMAC_FTR_IDE_RESET, core99_ide_reset },
- { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable },
- { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset },
- { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable },
- { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable },
- { PMAC_FTR_USB_ENABLE, core99_usb_enable },
- { PMAC_FTR_1394_ENABLE, core99_firewire_enable },
- { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power },
- { PMAC_FTR_SLEEP_STATE, core99_sleep_state },
- { PMAC_FTR_READ_GPIO, core99_read_gpio },
- { PMAC_FTR_WRITE_GPIO, core99_write_gpio },
- { 0, NULL }
-};
-
-static struct pmac_mb_def pmac_mb_defs[] __pmacdata = {
- /* Warning: ordering is important as some models may claim
- * beeing compatible with several types
- */
- { "AAPL,8500", "PowerMac 8500/8600",
- PMAC_TYPE_PSURGE, NULL,
- 0
- },
- { "AAPL,9500", "PowerMac 9500/9600",
- PMAC_TYPE_PSURGE, NULL,
- 0
- },
- { "AAPL,7500", "PowerMac 7500",
- PMAC_TYPE_PSURGE, NULL,
- 0
- },
- { "AAPL,ShinerESB", "Apple Network Server",
- PMAC_TYPE_ANS, NULL,
- 0
- },
- { "AAPL,e407", "Alchemy",
- PMAC_TYPE_ALCHEMY, NULL,
- 0
- },
- { "AAPL,e411", "Gazelle",
- PMAC_TYPE_GAZELLE, NULL,
- 0
- },
- { "AAPL,3400/2400", "PowerBook 3400",
- PMAC_TYPE_HOOPER, ohare_features,
- PMAC_MB_CAN_SLEEP
- },
- { "AAPL,3500", "PowerBook 3500",
- PMAC_TYPE_KANGA, ohare_features,
- PMAC_MB_CAN_SLEEP
- },
- { "AAPL,Gossamer", "PowerMac G3 (Gossamer)",
- PMAC_TYPE_GOSSAMER, heathrow_desktop_features,
- 0
- },
- { "AAPL,PowerMac G3", "PowerMac G3 (Silk)",
- PMAC_TYPE_SILK, heathrow_desktop_features,
- 0
- },
- { "AAPL,PowerBook1998", "PowerBook Wallstreet",
- PMAC_TYPE_WALLSTREET, heathrow_laptop_features,
- PMAC_MB_CAN_SLEEP
- },
- { "AAPL,PowerBook1,1", "PowerBook 101 (Lombard)",
- PMAC_TYPE_101_PBOOK, paddington_features,
- PMAC_MB_CAN_SLEEP
- },
- { "iMac,1", "iMac (first generation)",
- PMAC_TYPE_ORIG_IMAC, paddington_features,
- 0
- },
- { "PowerMac4,1", "iMac \"Flower Power\"",
- PMAC_TYPE_PANGEA_IMAC, pangea_features,
- PMAC_MB_CAN_SLEEP
- },
- { "PowerBook4,3", "iBook 2 with 14\" LCD",
- PMAC_TYPE_IBOOK2, pangea_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerBook4,2", "iBook 2 with 14\" LCD",
- PMAC_TYPE_IBOOK2, pangea_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerBook4,1", "iBook 2",
- PMAC_TYPE_IBOOK2, pangea_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerMac4,2", "Flat panel iMac",
- PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features,
- PMAC_MB_CAN_SLEEP
- },
- { "PowerMac1,1", "Blue&White G3",
- PMAC_TYPE_YOSEMITE, paddington_features,
- 0
- },
- { "PowerMac1,2", "PowerMac G4 PCI Graphics",
- PMAC_TYPE_YIKES, paddington_features,
- 0
- },
- { "PowerBook2,1", "iBook (first generation)",
- PMAC_TYPE_ORIG_IBOOK, core99_features,
- PMAC_MB_CAN_SLEEP
- },
- { "PowerMac3,1", "PowerMac G4 AGP Graphics",
- PMAC_TYPE_SAWTOOTH, core99_features,
- 0
- },
- { "PowerMac3,2", "PowerMac G4 AGP Graphics",
- PMAC_TYPE_SAWTOOTH, core99_features,
- 0
- },
- { "PowerMac3,3", "PowerMac G4 AGP Graphics",
- PMAC_TYPE_SAWTOOTH, core99_features,
- 0
- },
- { "PowerMac2,1", "iMac FireWire",
- PMAC_TYPE_FW_IMAC, core99_features,
- PMAC_MB_CAN_SLEEP
- },
- { "PowerMac2,2", "iMac FireWire",
- PMAC_TYPE_FW_IMAC, core99_features,
- PMAC_MB_CAN_SLEEP
- },
- { "PowerBook2,2", "iBook FireWire",
- PMAC_TYPE_FW_IBOOK, core99_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerMac5,1", "PowerMac G4 Cube",
- PMAC_TYPE_CUBE, core99_features,
- },
- { "PowerMac3,4", "PowerMac G4 Silver",
- PMAC_TYPE_QUICKSILVER, core99_features,
- 0
- },
- { "PowerMac3,5", "PowerMac G4 Silver",
- PMAC_TYPE_QUICKSILVER, core99_features,
- 0
- },
- { "PowerBook3,1", "PowerBook Pismo",
- PMAC_TYPE_PISMO, core99_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerBook3,2", "PowerBook Titanium",
- PMAC_TYPE_TITANIUM, core99_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerBook3,3", "PowerBook Titanium II",
- PMAC_TYPE_TITANIUM2, core99_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
- { "PowerBook3,4", "PowerBook Titanium III",
- PMAC_TYPE_TITANIUM3, core99_features,
- PMAC_MB_CAN_SLEEP | PMAC_MB_HAS_FW_POWER
- },
-};
-
-/*
- * The toplevel feature_call callback
- */
-int __pmac
-pmac_do_feature_call(unsigned int selector, ...)
-{
- struct device_node* node;
- int param, value, i;
- feature_call func = NULL;
- va_list args;
-
- if (pmac_mb.features)
- for (i=0; pmac_mb.features[i].function; i++)
- if (pmac_mb.features[i].selector == selector) {
- func = pmac_mb.features[i].function;
- break;
- }
- if (!func)
- for (i=0; any_features[i].function; i++)
- if (any_features[i].selector == selector) {
- func = any_features[i].function;
- break;
- }
- if (!func)
- return -ENODEV;
-
- va_start(args, selector);
- node = (struct device_node*)va_arg(args, void*);
- param = va_arg(args, int);
- value = va_arg(args, int);
- va_end(args);
-
- return func(node, param, value);
-}
-
-static int __init
-probe_motherboard(void)
-{
- int i;
- struct macio_chip* macio = &macio_chips[0];
-
- /* Lookup known motherboard type in device-tree */
- for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
- if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
- pmac_mb = pmac_mb_defs[i];
- goto found;
- }
- }
-
- /* Fallback to selection depending on mac-io chip type */
- switch(macio->type) {
- case macio_grand_central:
- pmac_mb.model_id = PMAC_TYPE_PSURGE;
- pmac_mb.model_name = "Unknown PowerSurge";
- break;
- case macio_ohare:
- pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
- pmac_mb.model_name = "Unknown OHare-based";
- break;
- case macio_heathrow:
- pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
- pmac_mb.model_name = "Unknown Heathrow-based";
- pmac_mb.features = heathrow_desktop_features;
- break;
- case macio_paddington:
- pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
- pmac_mb.model_name = "Unknown Paddington-based";
- pmac_mb.features = paddington_features;
- break;
- case macio_keylargo:
- pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
- pmac_mb.model_name = "Unknown Keylargo-based";
- pmac_mb.features = core99_features;
- break;
- case macio_pangea:
- pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
- pmac_mb.model_name = "Unknown Pangea-based";
- pmac_mb.features = pangea_features;
- break;
- default:
- return -ENODEV;
- }
-found:
- /* Fixup Hooper vs. Comet */
- if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
- u32* mach_id_ptr = (u32*)ioremap(0xf3000034, 4);
- if (!mach_id_ptr)
- return -ENODEV;
- /* Here, I used to disable the media-bay on comet. It
- * appears this is wrong, the floppy connector is actually
- * a kind of media-bay and works with the current driver.
- */
- if ((*mach_id_ptr) & 0x20000000UL)
- pmac_mb.model_id = PMAC_TYPE_COMET;
- iounmap(mach_id_ptr);
- }
-
- /* Set default value of powersave_nap on machines that support it.
- * It appears that uninorth rev 3 has a problem with it, we don't
- * enable it on those. In theory, the flush-on-lock property is
- * supposed to be set when not supported, but I'm not very confident
- * that all Apple OF revs did it properly, I do it the paranoid way.
- */
- while (uninorth_base && uninorth_rev > 3) {
- struct device_node* np = find_path_device("/cpus");
- u32 pvr = mfspr(PVR);
- if (!np || !np->child) {
- printk(KERN_WARNING "Can't find CPU(s) in device tree !\n");
- break;
- }
- np = np->child;
- /* Nap mode not supported on SMP */
- if (np->sibling)
- break;
- /* Nap mode not supported if flush-on-lock property is present */
- if (get_property(np, "flush-on-lock", NULL))
- break;
- /* Some 7450 may have problem with NAP mode too ... */
- if (((pvr >> 16) == 0x8000) && ((pvr & 0xffff) < 0x0201))
- break;
- powersave_nap = 1;
- printk(KERN_INFO "Processor NAP mode on idle enabled.\n");
- break;
- }
-
- printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
- return 0;
-}
-
-/* Initialize the Core99 UniNorth host bridge and memory controller
- */
-static void __init
-probe_uninorth(void)
-{
- unsigned long actrl;
-
- /* Locate core99 Uni-N */
- uninorth_node = find_devices("uni-n");
- if (uninorth_node && uninorth_node->n_addrs > 0) {
- uninorth_base = ioremap(uninorth_node->addrs[0].address, 0x1000);
- uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
- } else
- uninorth_node = NULL;
-
- if (!uninorth_node)
- return;
-
- printk(KERN_INFO "Found Uninorth memory controller & host bridge, revision: %d\n",
- uninorth_rev);
-
- /* Set the arbitrer QAck delay according to what Apple does
- */
- if (uninorth_rev < 0x10) {
- actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
- actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
- UNI_N_ARB_CTRL_QACK_DELAY) << UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
- UN_OUT(UNI_N_ARB_CTRL, actrl);
- }
-}
-
-static void __init
-probe_one_macio(const char* name, const char* compat, int type)
-{
- struct device_node* node;
- int i;
- volatile u32* base;
- u32* revp;
-
- node = find_devices(name);
- if (!node || !node->n_addrs)
- return;
- if (compat)
- do {
- if (device_is_compatible(node, compat))
- break;
- node = node->next;
- } while (node);
- if (!node)
- return;
- for(i=0; i<MAX_MACIO_CHIPS; i++) {
- if (!macio_chips[i].of_node)
- break;
- if (macio_chips[i].of_node == node)
- return;
- }
- if (i >= MAX_MACIO_CHIPS) {
- printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
- printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name);
- return;
- }
- base = (volatile u32*)ioremap(node->addrs[0].address, node->addrs[0].size);
- if (!base) {
- printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n");
- return;
- }
- if (type == macio_keylargo) {
- u32* did = (u32 *)get_property(node, "device-id", NULL);
- if (*did == 0x00000025)
- type = macio_pangea;
- }
- macio_chips[i].of_node = node;
- macio_chips[i].type = type;
- macio_chips[i].base = base;
- macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON;
- revp = (u32 *)get_property(node, "revision-id", NULL);
- if (revp)
- macio_chips[i].rev = *revp;
- printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
- macio_names[type], macio_chips[i].rev, macio_chips[i].base);
-}
-
-static int __init
-probe_macios(void)
-{
- /* Warning, ordering is important */
- probe_one_macio("gc", NULL, macio_grand_central);
- probe_one_macio("ohare", NULL, macio_ohare);
- probe_one_macio("pci106b,7", NULL, macio_ohareII);
- probe_one_macio("mac-io", "keylargo", macio_keylargo);
- probe_one_macio("mac-io", "paddington", macio_paddington);
- probe_one_macio("mac-io", "gatwick", macio_gatwick);
- probe_one_macio("mac-io", "heathrow", macio_heathrow);
-
- /* Make sure the "main" macio chip appear first */
- if (macio_chips[0].type == macio_gatwick
- && macio_chips[1].type == macio_heathrow) {
- struct macio_chip temp = macio_chips[0];
- macio_chips[0] = macio_chips[1];
- macio_chips[1] = temp;
- }
- if (macio_chips[0].type == macio_ohareII
- && macio_chips[1].type == macio_ohare) {
- struct macio_chip temp = macio_chips[0];
- macio_chips[0] = macio_chips[1];
- macio_chips[1] = temp;
- }
-
- return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
-}
-
-static void __init
-initial_serial_shutdown(struct device_node* np)
-{
- int len;
- struct slot_names_prop {
- int count;
- char name[1];
- } *slots;
- char *conn;
- int port_type = PMAC_SCC_ASYNC;
- int modem = 0;
-
- slots = (struct slot_names_prop *)get_property(np, "slot-names", &len);
- conn = get_property(np, "AAPL,connector", &len);
- if (conn && (strcmp(conn, "infrared") == 0))
- port_type = PMAC_SCC_IRDA;
- else if (device_is_compatible(np, "cobalt"))
- modem = 1;
- else if (slots && slots->count > 0) {
- if (strcmp(slots->name, "IrDA") == 0)
- port_type = PMAC_SCC_IRDA;
- else if (strcmp(slots->name, "Modem") == 0)
- modem = 1;
- }
- if (modem)
- pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
- pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
-}
-
-static void __init
-set_initial_features(void)
-{
- struct device_node* np;
-
- /* That hack appears to be necessary for some StarMax motherboards
- * but I'm not too sure it was audited for side-effects on other
- * ohare based machines...
- * Since I still have difficulties figuring the right way to
- * differenciate them all and since that hack was there for a long
- * time, I'll keep it around
- */
- if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) {
- struct macio_chip* macio = &macio_chips[0];
- MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
- } else if (macio_chips[0].type == macio_ohare) {
- struct macio_chip* macio = &macio_chips[0];
- MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
- } else if (macio_chips[1].type == macio_ohare) {
- struct macio_chip* macio = &macio_chips[1];
- MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
- }
-
- if (macio_chips[0].type == macio_keylargo ||
- macio_chips[0].type == macio_pangea) {
- /* Enable GMAC for now for PCI probing. It will be disabled
- * later on after PCI probe
- */
- np = find_devices("ethernet");
- while(np) {
- if (np->parent
- && device_is_compatible(np->parent, "uni-north")
- && device_is_compatible(np, "gmac"))
- core99_gmac_enable(np, 0, 1);
- np = np->next;
- }
-
- /* Enable FW before PCI probe. Will be disabled later on
- * Note: We should have a batter way to check that we are
- * dealing with uninorth internal cell and not a PCI cell
- * on the external PCI. The code below works though.
- */
- np = find_devices("firewire");
- while(np) {
- if (np->parent
- && device_is_compatible(np->parent, "uni-north")
- && (device_is_compatible(np, "pci106b,18") ||
- device_is_compatible(np, "pci106b,30") ||
- device_is_compatible(np, "pci11c1,5811"))) {
- macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
- core99_firewire_enable(np, 0, 1);
- }
- np = np->next;
- }
-
- /* Switch airport off */
- np = find_devices("radio");
- while(np) {
- if (np && np->parent == macio_chips[0].of_node) {
- macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
- core99_airport_enable(np, 0, 0);
- }
- np = np->next;
- }
- }
-
- /* On all machines that support sound PM, switch sound off */
- if (macio_chips[0].of_node)
- pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
- macio_chips[0].of_node, 0, 0);
-
- /* While on some desktop G3s, we turn it back on */
- if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
- && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
- pmac_mb.model_id == PMAC_TYPE_SILK)) {
- struct macio_chip* macio = &macio_chips[0];
- MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
- MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
- }
-
-
- /* On all machines, switch modem & serial ports off */
- np = find_devices("ch-a");
- while(np) {
- initial_serial_shutdown(np);
- np = np->next;
- }
- np = find_devices("ch-b");
- while(np) {
- initial_serial_shutdown(np);
- np = np->next;
- }
-
- /* Let hardware settle down */
- mdelay(10);
-}
-
-void __init
-pmac_feature_init(void)
-{
- /* Detect the UniNorth memory controller */
- probe_uninorth();
-
- /* Probe mac-io controllers */
- if (probe_macios()) {
- printk(KERN_WARNING "No mac-io chip found\n");
- return;
- }
-
- /* Probe machine type */
- if (probe_motherboard())
- printk(KERN_WARNING "Unknown PowerMac !\n");
-
- /* Set some initial features (turn off some chips that will
- * be later turned on)
- */
- set_initial_features();
-}
-
-void __init
-pmac_feature_late_init(void)
-{
- struct device_node* np;
-
- /* Request some resources late */
- if (uninorth_node)
- request_OF_resource(uninorth_node, 0, NULL);
- np = find_devices("hammerhead");
- if (np)
- request_OF_resource(np, 0, NULL);
- np = find_devices("interrupt-controller");
- if (np)
- request_OF_resource(np, 0, NULL);
-}
FUNET's LINUX-ADM group, linux-adm@nic.funet.fi
TCL-scripts by Sam Shen (who was at: slshen@lbl.gov)