patch-2.4.5 linux/drivers/isdn/avmb1/avmcard.h

• Lines: 70
• Date: Sat May 19 17:54:14 2001
• Orig file: v2.4.4/linux/drivers/isdn/avmb1/avmcard.h
• Orig date: Thu Apr 19 22:30:16 2001

diff -u --recursive --new-file v2.4.4/linux/drivers/isdn/avmb1/avmcard.h linux/drivers/isdn/avmb1/avmcard.h
@@ -1,60 +1,8 @@
 /*
- * $Id: avmcard.h,v 1.8.6.1 2001/04/20 02:41:59 keil Exp $
+ * $Id: avmcard.h,v 1.8.6.3 2001/05/17 21:15:33 kai Exp $
  *
  * Copyright 1999 by Carsten Paeth (calle@calle.in-berlin.de)
  *
- * $Log: avmcard.h,v $
- * Revision 1.8.6.1  2001/04/20 02:41:59  keil
- * changes from mainstream
- *
- * Revision 1.8  2000/10/10 17:44:19  kai
- * changes from/for 2.2.18
- *
- * Revision 1.7  2000/01/25 14:33:38  calle
- * - Added Support AVM B1 PCI V4.0 (tested with prototype)
- *   - splitted up t1pci.c into b1dma.c for common function with b1pciv4
- *   - support for revision register
- *
- * Revision 1.6  1999/11/05 16:38:01  calle
- * Cleanups before kernel 2.4:
- * - Changed all messages to use card->name or driver->name instead of
- *   constant string.
- * - Moved some data from struct avmcard into new struct avmctrl_info.
- *   Changed all lowlevel capi driver to match the new structur.
- *
- * Revision 1.5  1999/09/07 09:02:53  calle
- * SETDATA removed. Now inside the kernel the datapart of DATA_B3_REQ and
- * DATA_B3_IND is always directly after the CAPI message. The "Data" member
- * ist never used inside the kernel.
- *
- * Revision 1.4  1999/08/04 10:10:08  calle
- * Bugfix: corrected /proc functions, added structure for new AVM cards.
- *
- * Revision 1.3  1999/07/23 08:41:47  calle
- * prepared for new AVM cards.
- *
- * Revision 1.2  1999/07/05 15:09:45  calle
- * - renamed "appl_release" to "appl_released".
- * - version und profile data now cleared on controller reset
- * - extended /proc interface, to allow driver and controller specific
- *   informations to include by driver hackers.
- *
- * Revision 1.1  1999/07/01 15:26:22  calle
- * complete new version (I love it):
- * + new hardware independed "capi_driver" interface that will make it easy to:
- *   - support other controllers with CAPI-2.0 (i.e. USB Controller)
- *   - write a CAPI-2.0 for the passive cards
- *   - support serial link CAPI-2.0 boxes.
- * + wrote "capi_driver" for all supported cards.
- * + "capi_driver" (supported cards) now have to be configured with
- *   make menuconfig, in the past all supported cards where included
- *   at once.
- * + new and better informations in /proc/capi/
- * + new ioctl to switch trace of capi messages per controller
- *   using "avmcapictrl trace [contr] on|off|...."
- * + complete testcircle with all supported cards and also the
- *   PCMCIA cards (now patch for pcmcia-cs-3.0.13 needed) done.
- *
  */
 
 #ifndef _AVMCARD_H_
@@ -62,7 +10,6 @@
 
 #define	AVMB1_PORTLEN		0x1f
 #define AVM_MAXVERSION		8
-#define AVM_NAPPS		30
 #define AVM_NCCI_PER_CHANNEL	4
 
 /*