patch-2.4.7 linux/arch/cris/defconfig

• Lines: 150
• Date: Wed Jul 4 11:50:38 2001
• Orig file: v2.4.6/linux/arch/cris/defconfig
• Orig date: Tue May 1 16:04:56 2001

diff -u --recursive --new-file v2.4.6/linux/arch/cris/defconfig linux/arch/cris/defconfig
@@ -2,6 +2,8 @@
 # Automatically generated make config: don't edit
 #
 CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
 
 #
 # Code maturity level options
@@ -13,8 +15,9 @@
 #
 CONFIG_NET=y
 CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_SYSCTL is not set
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_JAVA is not set
 # CONFIG_ETRAX_KGDB is not set
 # CONFIG_ETRAX_WATCHDOG is not set
 
@@ -27,16 +30,30 @@
 CONFIG_CRIS_LOW_MAP=y
 CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000
 CONFIG_ETRAX_DRAM_SIZE=8
-CONFIG_ETRAX_FLASH_LENGTH=2
 CONFIG_ETRAX_FLASH_BUSWIDTH=2
 CONFIG_ETRAX_PA_LEDS=y
 # CONFIG_ETRAX_PB_LEDS is not set
-# CONFIG_ETRAX_90000000_LEDS is not set
+# CONFIG_ETRAX_CSP0_LEDS is not set
 # CONFIG_ETRAX_NO_LEDS is not set
 CONFIG_ETRAX_LED1G=2
 CONFIG_ETRAX_LED1R=2
 CONFIG_ETRAX_LED2G=2
 CONFIG_ETRAX_LED2R=2
+CONFIG_ETRAX_LED3R=2
+CONFIG_ETRAX_LED3G=2
+CONFIG_ETRAX_LED4R=2
+CONFIG_ETRAX_LED4G=2
+CONFIG_ETRAX_LED5R=2
+CONFIG_ETRAX_LED5G=2
+CONFIG_ETRAX_LED6R=2
+CONFIG_ETRAX_LED6G=2
+CONFIG_ETRAX_LED7R=2
+CONFIG_ETRAX_LED7G=2
+CONFIG_ETRAX_LED8Y=2
+CONFIG_ETRAX_LED9Y=2
+CONFIG_ETRAX_LED10Y=2
+CONFIG_ETRAX_LED11Y=2
+CONFIG_ETRAX_LED12R=2
 CONFIG_ETRAX_DEBUG_PORT0=y
 # CONFIG_ETRAX_DEBUG_PORT1 is not set
 # CONFIG_ETRAX_DEBUG_PORT2 is not set
@@ -55,13 +72,17 @@
 CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=00
 CONFIG_ETRAX_DEF_R_PORT_PB_DIR=1e
 CONFIG_ETRAX_DEF_R_PORT_PB_DATA=f3
+# CONFIG_ETRAX_SOFT_SHUTDOWN is not set
 
 #
-# Drivers for Etrax built-in interfaces
+# Drivers for ETRAX 100LX built-in interfaces
 #
 CONFIG_ETRAX_ETHERNET=y
 CONFIG_NET_ETHERNET=y
-CONFIG_ETRAX_SERIAL=y
+# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
+CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
+C# CONFIG_ETRAX_ETHERNET_LPSLAVE is not set
+ONFIG_ETRAX_SERIAL=y
 # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
 CONFIG_ETRAX_SERIAL_PORT1=y
 # CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_ON_PB is not set
@@ -71,6 +92,7 @@
 # CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
 # CONFIG_ETRAX_IDE is not set
 CONFIG_ETRAX_AXISFLASHMAP=y
+CONFIG_ETRAX_PTABLE_SECTOR=65536
 CONFIG_MTD=y
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_CFI_INTELEXT is not set
@@ -80,6 +102,7 @@
 CONFIG_MTD_BLOCK=y
 CONFIG_ETRAX_I2C=y
 CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
+# CONFIG_ETRAX_I2C_EEPROM is not set
 CONFIG_ETRAX_GPIO=y
 CONFIG_ETRAX_PA_BUTTON_BITMASK=02
 CONFIG_ETRAX_PA_CHANGEABLE_DIR=00
@@ -87,21 +110,35 @@
 CONFIG_ETRAX_PB_CHANGEABLE_DIR=00
 CONFIG_ETRAX_PB_CHANGEABLE_BITS=FF
 # CONFIG_ETRAX_USB_HOST is not set
+# CONFIG_USB is not set
+# CONFIG_ETRAX_DS1302 is not set
 
 #
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
 # CONFIG_MTD_DOC1000 is not set
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOCPROBE is not set
+
+#
+# RAM/ROM Device Drivers
+#
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_MTDRAM is not set
+
+#
+# Linearly Mapped Flash Device Drivers
+#
 CONFIG_MTD_CFI=y
 # CONFIG_MTD_CFI_GEOMETRY is not set
 # CONFIG_MTD_CFI_INTELEXT is not set
@@ -112,6 +149,7 @@
 # CONFIG_MTD_NORA is not set
 # CONFIG_MTD_PNC2000 is not set
 # CONFIG_MTD_RPXLITE is not set
+# CONFIG_MTD_SC520CDP is not set
 # CONFIG_MTD_SBC_MEDIAGX is not set
 # CONFIG_MTD_ELAN_104NC is not set
 # CONFIG_MTD_SA1100 is not set
@@ -121,8 +159,16 @@
 # CONFIG_MTD_MIXMEM is not set
 # CONFIG_MTD_OCTAGON is not set
 # CONFIG_MTD_VMAX is not set
+
+#
+# NAND Flash Device Drivers
+#
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_NAND_SPIA is not set
+
+#
+# User Modules And Translation Layers
+#
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set