commit 756db2ba8bde4ead58ceb54e9cbc71f526f9a98f Author: Greg Kroah-Hartman Date: Wed Oct 6 15:05:11 2021 +0200 Linux 4.14.249 Link: https://lore.kernel.org/r/20211004125031.530773667@linuxfoundation.org Link: https://lore.kernel.org/r/20211005083258.454981062@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman commit babe2c4a00da1c28c006f6c0e0b22f3c82581fe5 Author: NeilBrown Date: Mon Dec 3 11:30:30 2018 +1100 cred: allow get_cred() and put_cred() to be given NULL. commit f06bc03339ad4c1baa964a5f0606247ac1c3c50b upstream. It is common practice for helpers like this to silently, accept a NULL pointer. get_rpccred() and put_rpccred() used by NFS act this way and using the same interface will ease the conversion for NFS, and simplify the resulting code. Signed-off-by: NeilBrown Signed-off-by: Anna Schumaker Cc: Eric Dumazet Signed-off-by: Greg Kroah-Hartman commit c3156fea4d8a0e643625dff69a0421e872d1fdae Author: Anirudh Rayabharam Date: Thu Jun 24 00:10:29 2021 +0530 HID: usbhid: free raw_report buffers in usbhid_stop commit f7744fa16b96da57187dc8e5634152d3b63d72de upstream. Free the unsent raw_report buffers when the device is removed. Fixes a memory leak reported by syzbot at: https://syzkaller.appspot.com/bug?id=7b4fa7cb1a7c2d3342a2a8a6c53371c8c418ab47 Reported-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com Tested-by: syzbot+47b26cd837ececfc666d@syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 633bd6d69eac5deffbaeab4b33b34c7a98a7fc2c Author: Jozsef Kadlecsik Date: Mon Sep 6 18:26:34 2021 +0200 netfilter: ipset: Fix oversized kvmalloc() calls commit 7bbc3d385bd813077acaf0e6fdb2a86a901f5382 upstream. The commit commit 7661809d493b426e979f39ab512e3adf41fbcc69 Author: Linus Torvalds Date: Wed Jul 14 09:45:49 2021 -0700 mm: don't allow oversized kvmalloc() calls limits the max allocatable memory via kvmalloc() to MAX_INT. Apply the same limit in ipset. Reported-by: syzbot+3493b1873fb3ea827986@syzkaller.appspotmail.com Reported-by: syzbot+2b8443c35458a617c904@syzkaller.appspotmail.com Reported-by: syzbot+ee5cb15f4a0e85e0d54e@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman commit 1c83c38dec83d57bc18d0c01d82c413d3b34ccb9 Author: F.A.Sulaiman Date: Tue Aug 24 20:37:30 2021 +0530 HID: betop: fix slab-out-of-bounds Write in betop_probe commit 1e4ce418b1cb1a810256b5fb3fd33d22d1325993 upstream. Syzbot reported slab-out-of-bounds Write bug in hid-betopff driver. The problem is the driver assumes the device must have an input report but some malicious devices violate this assumption. So this patch checks hid_device's input is non empty before it's been used. Reported-by: syzbot+07efed3bc5a1407bd742@syzkaller.appspotmail.com Signed-off-by: F.A. SULAIMAN Reviewed-by: Pavel Skripkin Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman commit 3707e37b3fcef4d5e9a81b9c2c48ba7248051c2a Author: Dan Carpenter Date: Thu Aug 26 16:04:27 2021 +0300 crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd() commit 505d9dcb0f7ddf9d075e729523a33d38642ae680 upstream. There are three bugs in this code: 1) If we ccp_init_data() fails for &src then we need to free aad. Use goto e_aad instead of goto e_ctx. 2) The label to free the &final_wa was named incorrectly as "e_tag" but it should have been "e_final_wa". One error path leaked &final_wa. 3) The &tag was leaked on one error path. In that case, I added a free before the goto because the resource was local to that block. Fixes: 36cf515b9bbe ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Reported-by: "minihanshen(沈明航)" Signed-off-by: Dan Carpenter Reviewed-by: John Allen Tested-by: John Allen Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman commit 1a4089d9f9b3312e8e9c8d58945978160bdc55a7 Author: Dongliang Mu Date: Wed Jul 21 16:14:57 2021 +0800 usb: hso: remove the bailout parameter commit dcb713d53e2eadf42b878c12a471e74dc6ed3145 upstream. There are two invocation sites of hso_free_net_device. After refactoring hso_create_net_device, this parameter is useless. Remove the bailout in the hso_free_net_device and change the invocation sites of this function. Signed-off-by: Dongliang Mu Signed-off-by: David S. Miller Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit 4c0db9c4b3701c29f47bac0721e2f7d2b15d8edb Author: Dongliang Mu Date: Wed Jul 14 17:13:22 2021 +0800 usb: hso: fix error handling code of hso_create_net_device commit a6ecfb39ba9d7316057cea823b196b734f6b18ca upstream. The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0bfcd ("hso: fix bailout in error case of probe") Signed-off-by: Dongliang Mu Signed-off-by: David S. Miller Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit ed26ab7a02d9ab4354e38f16ec85c9fd8f099bec Author: Oliver Neukum Date: Wed Aug 5 14:07:07 2020 +0200 hso: fix bailout in error case of probe commit 5fcfb6d0bfcda17f0d0656e4e5b3710af2bbaae5 upstream. The driver tries to reuse code for disconnect in case of a failed probe. If resources need to be freed after an error in probe, the netdev must not be freed because it has never been registered. Fix it by telling the helper which path we are in. Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman commit c13d897b09515e63131c9e88318fbea653a1378d Author: Suzuki K Poulose Date: Wed Feb 3 23:00:57 2021 +0000 arm64: Extend workaround for erratum 1024718 to all versions of Cortex-A55 commit c0b15c25d25171db4b70cc0b7dbc1130ee94017d upstream. The erratum 1024718 affects Cortex-A55 r0p0 to r2p0. However we apply the work around for r0p0 - r1p0. Unfortunately this won't be fixed for the future revisions for the CPU. Thus extend the work around for all versions of A55, to cover for r2p0 and any future revisions. Cc: stable@vger.kernel.org Cc: Catalin Marinas Cc: Will Deacon Cc: James Morse Cc: Kunihiko Hayashi Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20210203230057.3961239-1-suzuki.poulose@arm.com [will: Update Kconfig help text] Signed-off-by: Will Deacon [Nanyon: adjust for stable version below v4.16, which set TCR_HD earlier in assembly code] Signed-off-by: Nanyong Sun Signed-off-by: Greg Kroah-Hartman commit ed6c090b5934aa6a7974c3f9cc843406d4979a6f Author: Alex Sverdlin Date: Mon Sep 27 14:02:59 2021 -0700 ARM: 9098/1: ftrace: MODULE_PLT: Fix build problem without DYNAMIC_FTRACE commit 6fa630bf473827aee48cbf0efbbdf6f03134e890 upstream FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is enough for MCOUNT_ADDR). Link: https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/ Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support") Reported-by: kernel test robot Signed-off-by: Alexander Sverdlin Signed-off-by: Russell King Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman commit d0db7cfb49f5b30feeea4327d93e971506aa0637 Author: Alex Sverdlin Date: Mon Sep 27 14:02:58 2021 -0700 ARM: 9079/1: ftrace: Add MODULE_PLTS support commit 79f32b221b18c15a98507b101ef4beb52444cc6f upstream Teach ftrace_make_call() and ftrace_make_nop() about PLTs. Teach PLT code about FTRACE and all its callbacks. Otherwise the following might happen: ------------[ cut here ]------------ WARNING: CPU: 14 PID: 2265 at .../arch/arm/kernel/insn.c:14 __arm_gen_branch+0x83/0x8c() ... Hardware name: LSI Axxia AXM55XX [] (unwind_backtrace) from [] (show_stack+0x11/0x14) [] (show_stack) from [] (dump_stack+0x81/0xa8) [] (dump_stack) from [] (warn_slowpath_common+0x69/0x90) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x17/0x1c) [] (warn_slowpath_null) from [] (__arm_gen_branch+0x83/0x8c) [] (__arm_gen_branch) from [] (ftrace_make_nop+0xf/0x24) [] (ftrace_make_nop) from [] (ftrace_process_locs+0x27b/0x3e8) [] (ftrace_process_locs) from [] (load_module+0x11e9/0x1a44) [] (load_module) from [] (SyS_finit_module+0x59/0x84) [] (SyS_finit_module) from [] (ret_fast_syscall+0x1/0x18) ---[ end trace e1b64ced7a89adcc ]--- ------------[ cut here ]------------ WARNING: CPU: 14 PID: 2265 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1b1/0x234() ... Hardware name: LSI Axxia AXM55XX [] (unwind_backtrace) from [] (show_stack+0x11/0x14) [] (show_stack) from [] (dump_stack+0x81/0xa8) [] (dump_stack) from [] (warn_slowpath_common+0x69/0x90) [] (warn_slowpath_common) from [] (warn_slowpath_null+0x17/0x1c) [] (warn_slowpath_null) from [] (ftrace_bug+0x1b1/0x234) [] (ftrace_bug) from [] (ftrace_process_locs+0x285/0x3e8) [] (ftrace_process_locs) from [] (load_module+0x11e9/0x1a44) [] (load_module) from [] (SyS_finit_module+0x59/0x84) [] (SyS_finit_module) from [] (ret_fast_syscall+0x1/0x18) ---[ end trace e1b64ced7a89adcd ]--- ftrace failed to modify [] 0xe9ef7006 actual: 02:f0:3b:fa ftrace record flags: 0 (0) expected tramp: c0314265 [florian: resolved merge conflict with struct dyn_arch_ftrace::old_mcount] Signed-off-by: Alexander Sverdlin Signed-off-by: Russell King Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman commit 29a8f3a3ccb733c76a44eff539aad2fa4a805510 Author: Alex Sverdlin Date: Mon Sep 27 14:02:57 2021 -0700 ARM: 9078/1: Add warn suppress parameter to arm_gen_branch_link() commit 890cb057a46d323fd8c77ebecb6485476614cd21 upstream Will be used in the following patch. No functional change. Signed-off-by: Alexander Sverdlin Signed-off-by: Russell King Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman commit 49229b008275ca4b618c05a18060970583f3bf9c Author: Alex Sverdlin Date: Mon Sep 27 14:02:56 2021 -0700 ARM: 9077/1: PLT: Move struct plt_entries definition to header commit 4e271701c17dee70c6e1351c4d7d42e70405c6a9 upstream No functional change, later it will be re-used in several files. Signed-off-by: Alexander Sverdlin Signed-off-by: Russell King Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman commit 27e30ed539677d73105ec593ec3532823b5465ac Author: Sai Krishna Potthuri Date: Wed Aug 18 12:53:14 2021 +0530 EDAC/synopsys: Fix wrong value type assignment for edac_mode commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream. dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman commit dfe1064adf369e913cf709437676ab20768de804 Author: Eric Dumazet Date: Mon Sep 27 17:29:24 2021 -0700 net: udp: annotate data race around udp_sk(sk)->corkflag commit a9f5970767d11eadc805d5283f202612c7ba1f59 upstream. up->corkflag field can be read or written without any lock. Annotate accesses to avoid possible syzbot/KCSAN reports. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7362dd8a9bd9238981639ca225055f00b82dd228 Author: yangerkun Date: Tue Sep 14 19:14:15 2021 +0800 ext4: fix potential infinite loop in ext4_dx_readdir() commit 42cb447410d024e9d54139ae9c21ea132a8c384c upstream. When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an infinite loop since if info->last_pos != ctx->pos this will reset the directory scan and reread the failing entry. For example: 1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as leaf block which own the ext4_dir_entry_2 2. block 1 read ok and call_filldir which will fill the dirent and update the ctx->pos 3. block 2 read fail, but we has already fill some dirent, so we will return back to userspace will a positive return val(see ksys_getdents64) 4. the second ext4_dx_readdir will reset the world since info->last_pos != ctx->pos, and will also init the curr_hash which pos to block 1 5. So we will read block1 too, and once block2 still read fail, we can only fill one dirent because the hash of the entry in block1(besides the last one) won't greater than curr_hash 6. this time, we forget update last_pos too since the read for block2 will fail, and since we has got the one entry, ksys_getdents64 can return success 7. Latter we will trapped in a loop with step 4~6 Cc: stable@kernel.org Signed-off-by: yangerkun Reviewed-by: Jan Kara Signed-off-by: Theodore Ts'o Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com Signed-off-by: Greg Kroah-Hartman commit dde4c1429b97383689f755ce92b4ed1e84a9c92b Author: Johan Hovold Date: Fri Sep 17 13:46:21 2021 +0200 ipack: ipoctal: fix module reference leak commit bb8a4fcb2136508224c596a7e665bdba1d7c3c27 upstream. A reference to the carrier module was taken on every open but was only released once when the final reference to the tty struct was dropped. Fix this by taking the module reference and initialising the tty driver data when installing the tty. Fixes: 82a82340bab6 ("ipoctal: get carrier driver to avoid rmmod") Cc: stable@vger.kernel.org # 3.18 Cc: Federico Vaga Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 58e818cd994fdd3921dfbbdc67d0b581a2f7aa2f Author: Johan Hovold Date: Fri Sep 17 13:46:20 2021 +0200 ipack: ipoctal: fix missing allocation-failure check commit 445c8132727728dc297492a7d9fc074af3e94ba3 upstream. Add the missing error handling when allocating the transmit buffer to avoid dereferencing a NULL pointer in write() should the allocation ever fail. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 9314f8826b888ecb2ca8a8dc6a0edd90ad29719f Author: Johan Hovold Date: Fri Sep 17 13:46:19 2021 +0200 ipack: ipoctal: fix tty-registration error handling commit cd20d59291d1790dc74248476e928f57fc455189 upstream. Registration of the ipoctal tty devices is unlikely to fail, but if it ever does, make sure not to deregister a never registered tty device (and dereference a NULL pointer) when the driver is later unbound. Fixes: 2afb41d9d30d ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 372f4ccabc1b6e4a2d89dd70d7f19b6a1d5aeb27 Author: Johan Hovold Date: Fri Sep 17 13:46:18 2021 +0200 ipack: ipoctal: fix tty registration race commit 65c001df517a7bf9be8621b53d43c89f426ce8d6 upstream. Make sure to set the tty class-device driver data before registering the tty to avoid having a racing open() dereference a NULL pointer. Fixes: 9c1d784afc6f ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.") Cc: stable@vger.kernel.org # 3.7 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 2725925982dc96a78069cd118ea3d66759bfdad7 Author: Johan Hovold Date: Fri Sep 17 13:46:17 2021 +0200 ipack: ipoctal: fix stack information leak commit a89936cce87d60766a75732a9e7e25c51164f47c upstream. The tty driver name is used also after registering the driver and must specifically not be allocated on the stack to avoid leaking information to user space (or triggering an oops). Drivers should not try to encode topology information in the tty device name but this one snuck in through staging without anyone noticing and another driver has since copied this malpractice. Fixing the ABI is a separate issue, but this at least plugs the security hole. Fixes: ba4dc61fe8c5 ("Staging: ipack: add support for IP-OCTAL mezzanine board") Cc: stable@vger.kernel.org # 3.5 Acked-by: Samuel Iglesias Gonsalvez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 9d76f723256d68eea16f0c563fc80b3c14258634 Author: Eric Dumazet Date: Wed Sep 29 15:57:50 2021 -0700 af_unix: fix races in sk_peer_pid and sk_peer_cred accesses [ Upstream commit 35306eb23814444bd4021f8a1c3047d3cb0c8b2b ] Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred. In order to fix this issue, this patch adds a new spinlock that needs to be used whenever these fields are read or written. Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently reading sk->sk_peer_pid which makes no sense, as this field is only possibly set by AF_UNIX sockets. We will have to clean this in a separate patch. This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback" or implementing what was truly expected. Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.") Signed-off-by: Eric Dumazet Reported-by: Jann Horn Cc: Eric W. Biederman Cc: Luiz Augusto von Dentz Cc: Marcel Holtmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit a9664da5999019947bfda1d7bb0ff12f9f5b41ee Author: Rahul Lakkireddy Date: Mon Sep 27 21:44:08 2021 +0530 scsi: csiostor: Add module softdep on cxgb4 [ Upstream commit 79a7482249a7353bc86aff8127954d5febf02472 ] Both cxgb4 and csiostor drivers run on their own independent Physical Function. But when cxgb4 and csiostor are both being loaded in parallel via modprobe, there is a race when firmware upgrade is attempted by both the drivers. When the cxgb4 driver initiates the firmware upgrade, it halts the firmware and the chip until upgrade is complete. When the csiostor driver is coming up in parallel, the firmware mailbox communication fails with timeouts and the csiostor driver probe fails. Add a module soft dependency on cxgb4 driver to ensure loading csiostor triggers cxgb4 to load first when available to avoid the firmware upgrade race. Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver") Signed-off-by: Rahul Lakkireddy Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 47aa88903f00698f106166b9b207c9fb3193c2bf Author: Jacob Keller Date: Wed Sep 8 10:52:37 2021 -0700 e100: fix buffer overrun in e100_get_regs [ Upstream commit 51032e6f17ce990d06123ad7307f258c50d25aa7 ] The e100_get_regs function is used to implement a simple register dump for the e100 device. The data is broken into a couple of MAC control registers, and then a series of PHY registers, followed by a memory dump buffer. The total length of the register dump is defined as (1 + E100_PHY_REGS) * sizeof(u32) + sizeof(nic->mem->dump_buf). The logic for filling in the PHY registers uses a convoluted inverted count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This is actually one more than the supposed number of PHY registers. The memory dump buffer is then filled into the space at [2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past the total size. The end result is that we overrun the total buffer size allocated by the kernel, which could lead to a panic or other issues due to memory corruption. It is difficult to determine the actual total number of registers here. The only 8255x datasheet I could find indicates there are 28 total MDI registers. However, we're reading 29 here, and reading them in reverse! In addition, the ethtool e100 register dump interface appears to read the first PHY register to determine if the device is in MDI or MDIx mode. This doesn't appear to be documented anywhere within the 8255x datasheet. I can only assume it must be in register 28 (the extra register we're reading here). Lets not change any of the intended meaning of what we copy here. Just extend the space by 4 bytes to account for the extra register and continue copying the data out in the same order. Change the E100_PHY_REGS value to be the correct total (29) so that the total register dump size is calculated properly. Fix the offset for where we copy the dump buffer so that it doesn't overrun the total size. Re-write the for loop to use counting up instead of the convoluted down-counting. Correct the mdio_read offset to use the 0-based register offsets, but maintain the bizarre reverse ordering so that we have the ABI expected by applications like ethtool. This requires and additional subtraction of 1. It seems a bit odd but it makes the flow of assignment into the register buffer easier to follow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Felicitas Hetzelt Signed-off-by: Jacob Keller Tested-by: Jacob Keller Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit a8c995965115e83e24d80883e79e42f9435fdfda Author: Jacob Keller Date: Wed Sep 8 10:52:36 2021 -0700 e100: fix length calculation in e100_get_regs_len [ Upstream commit 4329c8dc110b25d5f04ed20c6821bb60deff279f ] commit abf9b902059f ("e100: cleanup unneeded math") tried to simplify e100_get_regs_len and remove a double 'divide and then multiply' calculation that the e100_reg_regs_len function did. This change broke the size calculation entirely as it failed to account for the fact that the numbered registers are actually 4 bytes wide and not 1 byte. This resulted in a significant under allocation of the register buffer used by e100_get_regs. Fix this by properly multiplying the register count by u32 first before adding the size of the dump buffer. Fixes: abf9b902059f ("e100: cleanup unneeded math") Reported-by: Felicitas Hetzelt Signed-off-by: Jacob Keller Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin commit 6378e8a5a335a06293b29f5d94442d549365249b Author: Paul Fertser Date: Fri Sep 24 12:30:11 2021 +0300 hwmon: (tmp421) fix rounding for negative values [ Upstream commit 724e8af85854c4d3401313b6dd7d79cf792d8990 ] Old code produces -24999 for 0b1110011100000000 input in standard format due to always rounding up rather than "away from zero". Use the common macro for division, unify and simplify the conversion code along the way. Fixes: 9410700b881f ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips") Signed-off-by: Paul Fertser Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 77bc7dcf0fcc1519341a91788d7a2914fcfddf6d Author: Xin Long Date: Thu Sep 23 00:05:04 2021 -0400 sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb [ Upstream commit f7e745f8e94492a8ac0b0a26e25f2b19d342918f ] We should always check if skb_header_pointer's return is NULL before using it, otherwise it may cause null-ptr-deref, as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline] RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196 Call Trace: sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109 ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422 ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463 NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] NF_HOOK include/linux/netfilter.h:301 [inline] ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297 Fixes: 3acb50c18d8d ("sctp: delay as much as possible skb_linearize") Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit ce5f372f5f084ff51c285fc27b232f15a3d00f0b Author: Lorenzo Bianconi Date: Mon Sep 20 14:45:22 2021 +0200 mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap [ Upstream commit 13cb6d826e0ac0d144b0d48191ff1a111d32f0c6 ] Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap routine in order to fix the following warning reported by syzbot: WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 Modules linked in: CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline] RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244 RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216 RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000 RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100 R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8 R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004 FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Call Trace: ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740 netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089 __dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165 __bpf_tx_skb net/core/filter.c:2114 [inline] __bpf_redirect_no_mac net/core/filter.c:2139 [inline] __bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162 ____bpf_clone_redirect net/core/filter.c:2429 [inline] bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401 bpf_prog_eeb6f53a69e5c6a2+0x59/0x234 bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline] __bpf_prog_run include/linux/filter.h:624 [inline] bpf_prog_run include/linux/filter.h:631 [inline] bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119 bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663 bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline] __sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605 __do_sys_bpf kernel/bpf/syscall.c:4691 [inline] __se_sys_bpf kernel/bpf/syscall.c:4689 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Reported-by: syzbot+0196ac871673f0c20f68@syzkaller.appspotmail.com Fixes: 646e76bb5daf4 ("mac80211: parse VHT info in injected frames") Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/c26c3f02dcb38ab63b2f2534cb463d95ee81bb13.1632141760.git.lorenzo@kernel.org Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit 8eb2264118a8f9736c933983a9c975758b9fd3d9 Author: Chih-Kang Chang Date: Mon Aug 30 15:32:40 2021 +0800 mac80211: Fix ieee80211_amsdu_aggregate frag_tail bug [ Upstream commit fe94bac626d9c1c5bc98ab32707be8a9d7f8adba ] In ieee80211_amsdu_aggregate() set a pointer frag_tail point to the end of skb_shinfo(head)->frag_list, and use it to bind other skb in the end of this function. But when execute ieee80211_amsdu_aggregate() ->ieee80211_amsdu_realloc_pad()->pskb_expand_head(), the address of skb_shinfo(head)->frag_list will be changed. However, the ieee80211_amsdu_aggregate() not update frag_tail after call pskb_expand_head(). That will cause the second skb can't bind to the head skb appropriately.So we update the address of frag_tail to fix it. Fixes: 6e0456b54545 ("mac80211: add A-MSDU tx support") Signed-off-by: Chih-Kang Chang Signed-off-by: Zong-Zhe Yang Signed-off-by: Ping-Ke Shih Link: https://lore.kernel.org/r/20210830073240.12736-1-pkshih@realtek.com [reword comment] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin commit fbaeca0e3f0ceb33b6bb25a0fb0422f2ae438681 Author: Andrea Claudi Date: Fri Sep 10 18:08:39 2021 +0200 ipvs: check that ip_vs_conn_tab_bits is between 8 and 20 [ Upstream commit 69e73dbfda14fbfe748d3812da1244cce2928dcb ] ip_vs_conn_tab_bits may be provided by the user through the conn_tab_bits module parameter. If this value is greater than 31, or less than 0, the shift operator used to derive tab_size causes undefined behaviour. Fix this checking ip_vs_conn_tab_bits value to be in the range specified in ipvs Kconfig. If not, simply use default value. Fixes: 6f7edb4881bf ("IPVS: Allow boot time change of hash size") Reported-by: Yi Chen Signed-off-by: Andrea Claudi Acked-by: Julian Anastasov Acked-by: Simon Horman Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit f556e1d6fb9f2923a9a36f3df638c7d79ba09dbb Author: Johannes Berg Date: Mon Sep 27 11:58:39 2021 +0200 mac80211: fix use-after-free in CCMP/GCMP RX commit 94513069eb549737bcfc3d988d6ed4da948a2de8 upstream. When PN checking is done in mac80211, for fragmentation we need to copy the PN to the RX struct so we can later use it to do a comparison, since commit bf30ca922a0c ("mac80211: check defrag PN against current frame"). Unfortunately, in that commit I used the 'hdr' variable without it being necessarily valid, so use-after-free could occur if it was necessary to reallocate (parts of) the frame. Fix this by reloading the variable after the code that results in the reallocations, if any. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=214401. Cc: stable@vger.kernel.org Fixes: bf30ca922a0c ("mac80211: check defrag PN against current frame") Link: https://lore.kernel.org/r/20210927115838.12b9ac6bb233.I1d066acd5408a662c3b6e828122cd314fcb28cdb@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit 514643eadfeab8ee11e55981289c720308eb0afd Author: James Morse Date: Tue Sep 14 16:56:23 2021 +0000 cpufreq: schedutil: Destroy mutex before kobject_put() frees the memory [ Upstream commit cdef1196608892b9a46caa5f2b64095a7f0be60c ] Since commit e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables") kobject_put() has kfree()d the attr_set before gov_attr_set_put() returns. kobject_put() isn't the last user of attr_set in gov_attr_set_put(), the subsequent mutex_destroy() triggers a use-after-free: | BUG: KASAN: use-after-free in mutex_is_locked+0x20/0x60 | Read of size 8 at addr ffff000800ca4250 by task cpuhp/2/20 | | CPU: 2 PID: 20 Comm: cpuhp/2 Not tainted 5.15.0-rc1 #12369 | Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development | Platform, BIOS EDK II Jul 30 2018 | Call trace: | dump_backtrace+0x0/0x380 | show_stack+0x1c/0x30 | dump_stack_lvl+0x8c/0xb8 | print_address_description.constprop.0+0x74/0x2b8 | kasan_report+0x1f4/0x210 | kasan_check_range+0xfc/0x1a4 | __kasan_check_read+0x38/0x60 | mutex_is_locked+0x20/0x60 | mutex_destroy+0x80/0x100 | gov_attr_set_put+0xfc/0x150 | sugov_exit+0x78/0x190 | cpufreq_offline.isra.0+0x2c0/0x660 | cpuhp_cpufreq_offline+0x14/0x24 | cpuhp_invoke_callback+0x430/0x6d0 | cpuhp_thread_fun+0x1b0/0x624 | smpboot_thread_fn+0x5e0/0xa6c | kthread+0x3a0/0x450 | ret_from_fork+0x10/0x20 Swap the order of the calls. Fixes: e5c6b312ce3c ("cpufreq: schedutil: Use kobject release() method to free sugov_tunables") Cc: 4.7+ # 4.7+ Signed-off-by: James Morse Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 463c46705f321201090b69c4ad5da0cd2ce614c9 Author: Kevin Hao Date: Thu Aug 5 15:29:17 2021 +0800 cpufreq: schedutil: Use kobject release() method to free sugov_tunables [ Upstream commit e5c6b312ce3cc97e90ea159446e6bfa06645364d ] The struct sugov_tunables is protected by the kobject, so we can't free it directly. Otherwise we would get a call trace like this: ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30 WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100 Modules linked in: CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) pc : debug_print_object+0xb8/0x100 lr : debug_print_object+0xb8/0x100 sp : ffff80001ecaf910 x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80 x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000 x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20 x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010 x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365 x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69 x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0 x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001 x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000 x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000 Call trace: debug_print_object+0xb8/0x100 __debug_check_no_obj_freed+0x1c0/0x230 debug_check_no_obj_freed+0x20/0x88 slab_free_freelist_hook+0x154/0x1c8 kfree+0x114/0x5d0 sugov_exit+0xbc/0xc0 cpufreq_exit_governor+0x44/0x90 cpufreq_set_policy+0x268/0x4a8 store_scaling_governor+0xe0/0x128 store+0xc0/0xf0 sysfs_kf_write+0x54/0x80 kernfs_fop_write_iter+0x128/0x1c0 new_sync_write+0xf0/0x190 vfs_write+0x2d4/0x478 ksys_write+0x74/0x100 __arm64_sys_write+0x24/0x30 invoke_syscall.constprop.0+0x54/0xe0 do_el0_svc+0x64/0x158 el0_svc+0x2c/0xb0 el0t_64_sync_handler+0xb0/0xb8 el0t_64_sync+0x198/0x19c irq event stamp: 5518 hardirqs last enabled at (5517): [] console_unlock+0x554/0x6c8 hardirqs last disabled at (5518): [] el1_dbg+0x28/0xa0 softirqs last enabled at (5504): [] __do_softirq+0x4d0/0x6c0 softirqs last disabled at (5483): [] irq_exit+0x1b0/0x1b8 So split the original sugov_tunables_free() into two functions, sugov_clear_global_tunables() is just used to clear the global_tunables and the new sugov_tunables_free() is used as kobj_type::release to release the sugov_tunables safely. Fixes: 9bdcb44e391d ("cpufreq: schedutil: New governor based on scheduler utilization data") Cc: 4.7+ # 4.7+ Signed-off-by: Kevin Hao Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin commit 067c694d06040db6f0c65281bb358452ca6d85b9 Author: Igor Matheus Andrade Torrente Date: Mon Jun 28 10:45:09 2021 -0300 tty: Fix out-of-bound vmalloc access in imageblit [ Upstream commit 3b0c406124719b625b1aba431659f5cdc24a982c ] This issue happens when a userspace program does an ioctl FBIOPUT_VSCREENINFO passing the fb_var_screeninfo struct containing only the fields xres, yres, and bits_per_pixel with values. If this struct is the same as the previous ioctl, the vc_resize() detects it and doesn't call the resize_screen(), leaving the fb_var_screeninfo incomplete. And this leads to the updatescrollmode() calculates a wrong value to fbcon_display->vrows, which makes the real_y() return a wrong value of y, and that value, eventually, causes the imageblit to access an out-of-bound address value. To solve this issue I made the resize_screen() be called even if the screen does not need any resizing, so it will "fix and fill" the fb_var_screeninfo independently. Cc: stable # after 5.15-rc2 is out, give it time to bake Reported-and-tested-by: syzbot+858dc7a2f7ef07c2c219@syzkaller.appspotmail.com Signed-off-by: Igor Matheus Andrade Torrente Link: https://lore.kernel.org/r/20210628134509.15895-1-igormtorrente@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin commit 40faa4d13add5b6f79083f734b1a3a79e14a3336 Author: Linus Torvalds Date: Mon Sep 20 10:26:21 2021 -0700 qnx4: work around gcc false positive warning bug commit d5f6545934c47e97c0b48a645418e877b452a992 upstream. In commit b7213ffa0e58 ("qnx4: avoid stringop-overread errors") I tried to teach gcc about how the directory entry structure can be two different things depending on a status flag. It made the code clearer, and it seemed to make gcc happy. However, Arnd points to a gcc bug, where despite using two different members of a union, gcc then gets confused, and uses the size of one of the members to decide if a string overrun happens. And not necessarily the rigth one. End result: with some configurations, gcc-11 will still complain about the source buffer size being overread: fs/qnx4/dir.c: In function 'qnx4_readdir': fs/qnx4/dir.c:76:32: error: 'strnlen' specified bound [16, 48] exceeds source size 1 [-Werror=stringop-overread] 76 | size = strnlen(name, size); | ^~~~~~~~~~~~~~~~~~~ fs/qnx4/dir.c:26:22: note: source object declared here 26 | char de_name; | ^~~~~~~ because gcc will get confused about which union member entry is actually getting accessed, even when the source code is very clear about it. Gcc internally will have combined two "redundant" pointers (pointing to different union elements that are at the same offset), and takes the size checking from one or the other - not necessarily the right one. This is clearly a gcc bug, but we can work around it fairly easily. The biggest thing here is the big honking comment about why we do what we do. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578#c6 Reported-and-tested-by: Arnd Bergmann Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit ab9755f791868868d035d3c67e3618cea370a608 Author: Juergen Gross Date: Mon Sep 20 12:03:45 2021 +0200 xen/balloon: fix balloon kthread freezing commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream. Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") switched the Xen balloon driver to use a kernel thread. Unfortunately the patch omitted to call try_to_freeze() or to use wait_event_freezable_timeout(), causing a system suspend to fail. Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman commit e21c6587b0e987df1dfa9803306c73ad47261c94 Author: Evan Wang Date: Thu Jul 22 16:40:38 2021 +0200 PCI: aardvark: Fix checking for PIO status commit fcb461e2bc8b83b7eaca20cb2221e8b940f2189c upstream. There is an issue that when PCIe switch is connected to an Armada 3700 board, there will be lots of warnings about PIO errors when reading the config space. According to Aardvark PIO read and write sequence in HW specification, the current way to check PIO status has the following issues: 1) For PIO read operation, it reports the error message, which should be avoided according to HW specification. 2) For PIO read and write operations, it only checks PIO operation complete status, which is not enough, and error status should also be checked. This patch aligns the code with Aardvark PIO read and write sequence in HW specification on PIO status check and fix the warnings when reading config space. [pali: Fix CRS handling when CRSSVE is not enabled] Link: https://lore.kernel.org/r/20210722144041.12661-2-pali@kernel.org Tested-by: Victor Gu Signed-off-by: Evan Wang Signed-off-by: Pali Rohár Signed-off-by: Lorenzo Pieralisi Reviewed-by: Victor Gu Reviewed-by: Marek Behún Cc: stable@vger.kernel.org # b1bd5714472c ("PCI: aardvark: Indicate error in 'val' when config read fails") Signed-off-by: Greg Kroah-Hartman commit 538d73db8474e92dfc7236a015eb63f560599d15 Author: Pali Rohár Date: Thu Jun 24 23:33:43 2021 +0200 PCI: aardvark: Fix checking for PIO Non-posted Request commit 8ceeac307a79f68c0d0c72d6e48b82fa424204ec upstream. PIO_NON_POSTED_REQ for PIO_STAT register is incorrectly defined. Bit 10 in register PIO_STAT indicates the response is to a non-posted request. Link: https://lore.kernel.org/r/20210624213345.3617-2-pali@kernel.org Signed-off-by: Pali Rohár Signed-off-by: Lorenzo Pieralisi Reviewed-by: Marek Behún Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman commit 59a446e26ecb20ae22198018d9def225ad5ec74f Author: Pali Rohár Date: Thu Jun 24 23:55:46 2021 +0200 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space commit 514ef1e62d6521c2199d192b1c71b79d2aa21d5a upstream. Current PCIe MEM space of size 16 MB is not enough for some combination of PCIe cards (e.g. NVMe disk together with ath11k wifi card). ARM Trusted Firmware for Armada 3700 platform already assigns 128 MB for PCIe window, so extend PCIe MEM space to the end of 128 MB PCIe window which allows to allocate more PCIe BARs for more PCIe cards. Without this change some combination of PCIe cards cannot be used and kernel show error messages in dmesg during initialization: pci 0000:00:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:00:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:00:00.0: BAR 6: assigned [mem 0xe8000000-0xe80007ff pref] pci 0000:01:00.0: BAR 8: no space for [mem size 0x01800000] pci 0000:01:00.0: BAR 8: failed to assign [mem size 0x01800000] pci 0000:02:03.0: BAR 8: no space for [mem size 0x01000000] pci 0000:02:03.0: BAR 8: failed to assign [mem size 0x01000000] pci 0000:02:07.0: BAR 8: no space for [mem size 0x00100000] pci 0000:02:07.0: BAR 8: failed to assign [mem size 0x00100000] pci 0000:03:00.0: BAR 0: no space for [mem size 0x01000000 64bit] pci 0000:03:00.0: BAR 0: failed to assign [mem size 0x01000000 64bit] Due to bugs in U-Boot port for Turris Mox, the second range in Turris Mox kernel DTS file for PCIe must start at 16 MB offset. Otherwise U-Boot crashes during loading of kernel DTB file. This bug is present only in U-Boot code for Turris Mox and therefore other Armada 3700 devices are not affected by this bug. Bug is fixed in U-Boot version 2021.07. To not break booting new kernels on existing versions of U-Boot on Turris Mox, use first 16 MB range for IO and second range with rest of PCIe window for MEM. Signed-off-by: Pali Rohár Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman commit 89d9390e96159bba0649592bacc3bd93cb9fd6da Author: Linus Torvalds Date: Sat Sep 18 10:05:06 2021 -0700 spi: Fix tegra20 build with CONFIG_PM=n [ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ] Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being empty, and the only use of tegra_slink_runtime_{resume,suspend} goes away, resulting in drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function] 1200 | static int tegra_slink_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function] 1188 | static int tegra_slink_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mark the functions __maybe_unused to make the build happy. This hits the alpha allmodconfig build (and others). Reported-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit f98836a0b811c2dac31444bae906e7c309fb20ab Author: Guenter Roeck Date: Wed Sep 8 20:57:43 2021 -0700 net: 6pack: Fix tx timeout and slot time [ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ] tx timeout and slot time are currently specified in units of HZ. On Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this results in the following error message. drivers/net/hamradio/6pack.c: In function 'sixpack_open': drivers/net/hamradio/6pack.c:71:41: error: unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' In the 6PACK protocol, tx timeout is specified in units of 10 ms and transmitted over the wire: https://www.linux-ax25.org/wiki/6PACK Defining a value dependent on HZ doesn't really make sense, and presumably comes from the (very historical) situation where HZ was originally 100. Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); and the SIXP_TXDELAY walue is sent as a byte over the wire. Signed-off-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 2de807c0b6250becfdbd5a8945410b10f1293731 Author: Guenter Roeck Date: Wed Sep 8 22:00:33 2021 -0700 alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatile [ Upstream commit 35a3f4ef0ab543daa1725b0c963eb8c05e3376f8 ] Some drivers pass a pointer to volatile data to virt_to_bus() and virt_to_phys(), and that works fine. One exception is alpha. This results in a number of compile errors such as drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset': drivers/net/wan/lmc/lmc_main.c:1782:50: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type drivers/atm/ambassador.c: In function 'do_loader_command': drivers/atm/ambassador.c:1747:58: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type Declare the parameter of virt_to_phys and virt_to_bus as pointer to volatile to fix the problem. Signed-off-by: Guenter Roeck Acked-by: Arnd Bergmann Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 0a52ba738f9448943333abf8cdbad0342b2e3ef7 Author: Dan Li Date: Tue Sep 14 17:44:02 2021 +0800 arm64: Mark __stack_chk_guard as __ro_after_init [ Upstream commit 9fcb2e93f41c07a400885325e7dbdfceba6efaec ] __stack_chk_guard is setup once while init stage and never changed after that. Although the modification of this variable at runtime will usually cause the kernel to crash (so does the attacker), it should be marked as __ro_after_init, and it should not affect performance if it is placed in the ro_after_init section. Signed-off-by: Dan Li Acked-by: Mark Rutland Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com Signed-off-by: Catalin Marinas Signed-off-by: Sasha Levin commit 7596c2bd112a80badcd5f8918ad0cbf4025c256e Author: Helge Deller Date: Thu Sep 16 08:35:42 2021 +0200 parisc: Use absolute_pointer() to define PAGE0 [ Upstream commit 90cc7bed1ed19f869ae7221a6b41887fe762a6a3 ] Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning: arch/parisc/kernel/setup.c: In function 'start_parisc': error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0 Signed-off-by: Helge Deller Co-Developed-by: Guenter Roeck Suggested-by: Linus Torvalds Signed-off-by: Sasha Levin commit 0abc7244c171e13e9ea2b2402b484a10b115700f Author: Linus Torvalds Date: Wed Sep 15 13:56:37 2021 -0700 qnx4: avoid stringop-overread errors [ Upstream commit b7213ffa0e585feb1aee3e7173e965e66ee0abaa ] The qnx4 directory entries are 64-byte blocks that have different contents depending on the a status byte that is in the last byte of the block. In particular, a directory entry can be either a "link info" entry with a 48-byte name and pointers to the real inode information, or an "inode entry" with a smaller 16-byte name and the full inode information. But the code was written to always just treat the directory name as if it was part of that "inode entry", and just extend the name to the longer case if the status byte said it was a link entry. That work just fine and gives the right results, but now that gcc is tracking data structure accesses much more, the code can trigger a compiler error about using up to 48 bytes (the long name) in a structure that only has that shorter name in it: fs/qnx4/dir.c: In function ‘qnx4_readdir’: fs/qnx4/dir.c:51:32: error: ‘strnlen’ specified bound 48 exceeds source size 16 [-Werror=stringop-overread] 51 | size = strnlen(de->di_fname, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from fs/qnx4/qnx4.h:3, from fs/qnx4/dir.c:16: include/uapi/linux/qnx4_fs.h:45:25: note: source object declared here 45 | char di_fname[QNX4_SHORT_NAME_MAX]; | ^~~~~~~~ which is because the source code doesn't really make this whole "one of two different types" explicit. Fix this by introducing a very explicit union of the two types, and basically explaining to the compiler what is really going on. Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 57c6e551f207da5727fac5fe828b9686ca23e0ab Author: Linus Torvalds Date: Mon Sep 6 16:06:04 2021 -0700 sparc: avoid stringop-overread errors [ Upstream commit fc7c028dcdbfe981bca75d2a7b95f363eb691ef3 ] The sparc mdesc code does pointer games with 'struct mdesc_hdr', but didn't describe to the compiler how that header is then followed by the data that the header describes. As a result, gcc is now unhappy since it does stricter pointer range tracking, and doesn't understand about how these things work. This results in various errors like: arch/sparc/kernel/mdesc.c: In function ‘mdesc_node_by_name’: arch/sparc/kernel/mdesc.c:647:22: error: ‘strcmp’ reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread] 647 | if (!strcmp(names + ep[ret].name_offset, name)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ which are easily avoided by just describing 'struct mdesc_hdr' better, and making the node_block() helper function look into that unsized data[] that follows the header. This makes the sparc64 build happy again at least for my cross-compiler version (gcc version 11.2.1). Link: https://lore.kernel.org/lkml/CAHk-=wi4NW3NC0xWykkw=6LnjQD6D_rtRtxY9g8gQAJXtQMi8A@mail.gmail.com/ Cc: Guenter Roeck Cc: David S. Miller Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit d67202e13fd8e3ab07428a9ad5495efc49d31015 Author: Guenter Roeck Date: Tue Sep 14 20:52:25 2021 -0700 net: i825xx: Use absolute_pointer for memcpy from fixed memory location [ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ] gcc 11.x reports the following compiler warning/error. drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Use absolute_pointer() to work around the problem. Cc: Geert Uytterhoeven Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 9e067d4780c3953a6c7338fa32252ed002bcdcf3 Author: Guenter Roeck Date: Tue Sep 14 20:52:24 2021 -0700 compiler.h: Introduce absolute_pointer macro [ Upstream commit f6b5f1a56987de837f8e25cd560847106b8632a8 ] absolute_pointer() disassociates a pointer from its originating symbol type and context. Use it to prevent compiler warnings/errors such as drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Such warnings may be reported by gcc 11.x for string and memory operations on fixed addresses. Suggested-by: Linus Torvalds Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit c5d5a43dd2b649a0a290bfed00fb76d1aff89be6 Author: Juergen Gross Date: Fri Aug 27 14:32:06 2021 +0200 xen/balloon: use a kernel thread instead a workqueue [ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ] Today the Xen ballooning is done via delayed work in a workqueue. This might result in workqueue hangups being reported in case of large amounts of memory are being ballooned in one go (here 16GB): BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s! Showing busy workqueues and worker pools: workqueue events: flags=0x0 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3 in-flight: 229:balloon_process pending: cache_reap workqueue events_freezable_power_: flags=0x84 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: disk_events_workfn workqueue mm_percpu_wq: flags=0x8 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: vmstat_update pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43 This can easily be avoided by using a dedicated kernel thread for doing the ballooning work. Reported-by: Jan Beulich Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit e8bbc24fba264bd29e114977e22885c03e88a195 Author: Guenter Roeck Date: Mon Sep 6 23:07:29 2021 -0700 m68k: Double cast io functions to unsigned long [ Upstream commit b1a89856fbf63fffde6a4771d8f1ac21df549e50 ] m68k builds fail widely with errors such as arch/m68k/include/asm/raw_io.h:20:19: error: cast to pointer from integer of different size arch/m68k/include/asm/raw_io.h:30:32: error: cast to pointer from integer of different size [-Werror=int-to-p On m68k, io functions are defined as macros. The problem is seen if the macro parameter variable size differs from the size of a pointer. Cast the parameter of all io macros to unsigned long before casting it to a pointer to fix the problem. Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210907060729.2391992-1-linux@roeck-us.net Signed-off-by: Geert Uytterhoeven Signed-off-by: Sasha Levin commit 3cd5d054611e7241ef40f6d5e7babaadd66a19fd Author: Jesper Nilsson Date: Fri Sep 10 21:55:34 2021 +0200 net: stmmac: allow CSR clock of 300MHz [ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ] The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by: Jesper Nilsson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit a7d521cc726f30b8e679a6f36d04b18a8ab3c536 Author: Tong Zhang Date: Wed Sep 8 12:02:32 2021 -0700 net: macb: fix use after free on rmmod [ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ] plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by: Nicolas Ferre Signed-off-by: Tong Zhang Acked-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit d56171d9360c0170c5c5f8f7e2362a2e999eca40 Author: Zhihao Cheng Date: Thu Sep 23 21:49:21 2021 +0800 blktrace: Fix uaf in blk_trace access after removing by sysfs [ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ] There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 9252a5f39df073d364d72662cb8a45dc2f0da328 Author: Christoph Hellwig Date: Wed Sep 1 13:38:29 2021 +0200 md: fix a lock order reversal in md_alloc [ Upstream commit 7df835a32a8bedf7ce88efcfa7c9b245b52ff139 ] Commit b0140891a8cea3 ("md: Fix race when creating a new md device.") not only moved assigning mddev->gendisk before calling add_disk, which fixes the races described in the commit log, but also added a mddev->open_mutex critical section over add_disk and creation of the md kobj. Adding a kobject after add_disk is racy vs deleting the gendisk right after adding it, but md already prevents against that by holding a mddev->active reference. On the other hand taking this lock added a lock order reversal with what is not disk->open_mutex (used to be bdev->bd_mutex when the commit was added) for partition devices, which need that lock for the internal open for the partition scan, and a recent commit also takes it for non-partitioned devices, leading to further lockdep splatter. Fixes: b0140891a8ce ("md: Fix race when creating a new md device.") Fixes: d62633873590 ("block: support delayed holder registration") Reported-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Signed-off-by: Christoph Hellwig Tested-by: syzbot+fadc0aaf497e6a493b9f@syzkaller.appspotmail.com Reviewed-by: NeilBrown Signed-off-by: Song Liu Signed-off-by: Sasha Levin commit 7d39992d45acd6f2d6b2f62389c55b61fb3d486b Author: Kaige Fu Date: Wed Sep 15 10:20:55 2021 +0800 irqchip/gic-v3-its: Fix potential VPE leak on error [ Upstream commit 280bef512933b2dda01d681d8cbe499b98fc5bdd ] In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. Fixes: 7d75bbb4bc1a ("irqchip/gic-v3-its: Add VPE irq domain allocation/teardown") Signed-off-by: Kaige Fu [maz: fixed commit message] Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/d9e36dee512e63670287ed9eff884a5d8d6d27f2.1631672311.git.kaige.fu@linux.alibaba.com Signed-off-by: Sasha Levin commit 31710aedd4b8be74ec7159f236d8fbda18e07472 Author: Dan Carpenter Date: Thu Sep 16 16:13:42 2021 +0300 thermal/core: Potential buffer overflow in thermal_build_list_of_policies() [ Upstream commit 1bb30b20b49773369c299d4d6c65227201328663 ] After printing the list of thermal governors, then this function prints a newline character. The problem is that "size" has not been updated after printing the last governor. This means that it can write one character (the NUL terminator) beyond the end of the buffer. Get rid of the "size" variable and just use "PAGE_SIZE - count" directly. Fixes: 1b4f48494eb2 ("thermal: core: group functions related to governor handling") Signed-off-by: Dan Carpenter Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20210916131342.GB25094@kili Signed-off-by: Sasha Levin commit b4599172710265af176d33d2a979a84faed41397 Author: Baokun Li Date: Wed Sep 1 16:53:36 2021 +0800 scsi: iscsi: Adjust iface sysfs attr detection [ Upstream commit 4e28550829258f7dab97383acaa477bd724c0ff4 ] ISCSI_NET_PARAM_IFACE_ENABLE belongs to enum iscsi_net_param instead of iscsi_iface_param so move it to ISCSI_NET_PARAM. Otherwise, when we call into the driver, we might not match and return that we don't want attr visible in sysfs. Found in code review. Link: https://lore.kernel.org/r/20210901085336.2264295-1-libaokun1@huawei.com Fixes: e746f3451ec7 ("scsi: iscsi: Fix iface sysfs attr detection") Reviewed-by: Lee Duncan Signed-off-by: Baokun Li Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin commit 5dbb82342ac4e202261e7af0358c2bbb622d6131 Author: Aya Levin Date: Thu Sep 23 09:51:45 2021 +0300 net/mlx4_en: Don't allow aRFS for encapsulated packets [ Upstream commit fdbccea419dc782079ce5881d2705cc9e3881480 ] Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 0c8ff25583b57f12c823b27d58b848f095cc20e0 Author: Michael Chan Date: Mon Sep 20 02:51:52 2021 -0400 bnxt_en: Fix TX timeout when TX ring size is set to the smallest [ Upstream commit 5bed8b0704c9ecccc8f4a2c377d7c8e21090a82e ] The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 3bfcd02538d18ae130f4b28d3cef7a5d5928e13e Author: Johan Hovold Date: Fri Sep 17 12:12:04 2021 +0200 net: hso: fix muxed tty registration commit e8f69b16ee776da88589b5271e3f46020efc8f6c upstream. If resource allocation and registration fail for a muxed tty device (e.g. if there are no more minor numbers) the driver should not try to deregister the never-registered (or already-deregistered) tty. Fix up the error handling to avoid dereferencing a NULL pointer when attempting to remove the character device. Fixes: 72dc1c096c70 ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 503b2e01af0ef5106d6a32577d85e470cd956877 Author: Pali Rohár Date: Sat Sep 11 15:20:17 2021 +0200 serial: mvebu-uart: fix driver's tx_empty callback commit 74e1eb3b4a1ef2e564b4bdeb6e92afe844e900de upstream. Driver's tx_empty callback should signal when the transmit shift register is empty. So when the last character has been sent. STAT_TX_FIFO_EMP bit signals only that HW transmit FIFO is empty, which happens when the last byte is loaded into transmit shift register. STAT_TX_EMP bit signals when the both HW transmit FIFO and transmit shift register are empty. So replace STAT_TX_FIFO_EMP check by STAT_TX_EMP in mvebu_uart_tx_empty() callback function. Fixes: 30530791a7a0 ("serial: mvebu-uart: initial support for Armada-3700 serial port") Cc: stable Signed-off-by: Pali Rohár Link: https://lore.kernel.org/r/20210911132017.25505-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman commit 115b07d9f47e3996430b8f2007edd9768e1f807f Author: Dan Carpenter Date: Mon Sep 6 21:35:48 2021 +0900 mcb: fix error handling in mcb_alloc_bus() commit 25a1433216489de4abc889910f744e952cb6dbae upstream. There are two bugs: 1) If ida_simple_get() fails then this code calls put_device(carrier) but we haven't yet called get_device(carrier) and probably that leads to a use after free. 2) After device_initialize() then we need to use put_device() to release the bus. This will free the internal resources tied to the device and call mcb_free_bus() which will free the rest. Fixes: 5d9e2ab9fea4 ("mcb: Implement bus->dev.release callback") Fixes: 18d288198099 ("mcb: Correctly initialize the bus's device") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/32e160cf6864ce77f9d62948338e24db9fd8ead9.1630931319.git.johannes.thumshirn@wdc.com Signed-off-by: Greg Kroah-Hartman commit dcb8f64d574ce669f710de031a17b06918fe8fa7 Author: Slark Xiao Date: Fri Sep 17 19:01:06 2021 +0800 USB: serial: option: add device id for Foxconn T99W265 commit 9e3eed534f8235a4a596a9dae5b8a6425d81ea1a upstream. Adding support for Foxconn device T99W265 for enumeration with PID 0xe0db. usb-devices output for 0xe0db T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 19 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0489 ProdID=e0db Rev=05.04 S: Manufacturer=Microsoft S: Product=Generic Mobile Broadband Adapter S: SerialNumber=6c50f452 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option if0/1: MBIM, if2:Diag, if3:GNSS, if4: Modem Signed-off-by: Slark Xiao Link: https://lore.kernel.org/r/20210917110106.9852-1-slark_xiao@163.com [ johan: use USB_DEVICE_INTERFACE_CLASS(), amend comment ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 10f36c0e1865d05aaf890ee3e005435258cd1450 Author: Krzysztof Kozlowski Date: Fri Sep 17 11:18:48 2021 +0200 USB: serial: option: remove duplicate USB device ID commit 1ca200a8c6f079950a04ea3c3380fe8cf78e95a2 upstream. The device ZTE 0x0094 is already on the list. Signed-off-by: Krzysztof Kozlowski Fixes: b9e44fe5ecda ("USB: option: cleanup zte 3g-dongle's pid in option.c") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 92351dce2c8e5d2525bcd5c97ba94cc5e3a1a6cc Author: Carlo Lobrano Date: Fri Sep 3 14:39:13 2021 +0200 USB: serial: option: add Telit LN920 compositions commit 7bb057134d609b9c038a00b6876cf0d37d0118ce upstream. This patch adds the following Telit LN920 compositions: 0x1060: tty, adb, rmnet, tty, tty, tty, tty 0x1061: tty, adb, mbim, tty, tty, tty, tty 0x1062: rndis, tty, adb, tty, tty, tty, tty 0x1063: tty, adb, ecm, tty, tty, tty, tty Signed-off-by: Carlo Lobrano Link: https://lore.kernel.org/r/20210903123913.1086513-1-c.lobrano@gmail.com Reviewed-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 6c2cfb71d758df63aa0d066e59966c9a415761e8 Author: Krzysztof Kozlowski Date: Fri Sep 17 11:18:47 2021 +0200 USB: serial: mos7840: remove duplicated 0xac24 device ID commit 211f323768a25b30c106fd38f15a0f62c7c2b5f4 upstream. 0xac24 device ID is already defined and used via BANDB_DEVICE_ID_USO9ML2_4. Remove the duplicate from the list. Fixes: 27f1281d5f72 ("USB: serial: Extra device/vendor ID for mos7840 driver") Signed-off-by: Krzysztof Kozlowski Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit c09bdd8d4a74d430ec3092295c0941504500cfe6 Author: Julian Sikorski Date: Mon Sep 13 20:14:55 2021 +0200 Re-enable UAS for LaCie Rugged USB3-FW with fk quirk commit ce1c42b4dacfe7d71c852d8bf3371067ccba865c upstream. Further testing has revealed that LaCie Rugged USB3-FW does work with uas as long as US_FL_NO_REPORT_OPCODES and US_FL_NO_SAME are enabled. Link: https://lore.kernel.org/linux-usb/2167ea48-e273-a336-a4e0-10a4e883e75e@redhat.com/ Cc: stable Suggested-by: Hans de Goede Reviewed-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Julian Sikorski Link: https://lore.kernel.org/r/20210913181454.7365-1-belegdol+github@gmail.com Signed-off-by: Greg Kroah-Hartman commit 64062fcaca8872f063ec9da011e7bf30470be33f Author: Johan Hovold Date: Mon Sep 6 14:45:38 2021 +0200 staging: greybus: uart: fix tty use after free commit 92dc0b1f46e12cfabd28d709bb34f7a39431b44f upstream. User space can hold a tty open indefinitely and tty drivers must not release the underlying structures until the last user is gone. Switch to using the tty-port reference counter to manage the life time of the greybus tty state to avoid use after free after a disconnect. Fixes: a18e15175708 ("greybus: more uart work") Cc: stable@vger.kernel.org # 4.9 Reviewed-by: Alex Elder Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210906124538.22358-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman commit 70981eab3d556f5a30e8152e570cea285c7c10b2 Author: Uwe Brandt Date: Tue Sep 21 19:54:46 2021 +0200 USB: serial: cp210x: add ID for GW Instek GDM-834x Digital Multimeter commit 3bd18ba7d859eb1fbef3beb1e80c24f6f7d7596c upstream. Add the USB serial device ID for the GW Instek GDM-834x Digital Multimeter. Signed-off-by: Uwe Brandt Link: https://lore.kernel.org/r/YUxFl3YUCPGJZd8Y@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman commit 6770d718bebf2016fa0589effc78bf58b2907621 Author: Ondrej Zary Date: Mon Sep 13 23:01:06 2021 +0200 usb-storage: Add quirk for ScanLogic SL11R-IDE older than 2.6c commit b55d37ef6b7db3eda9b4495a8d9b0a944ee8c67d upstream. ScanLogic SL11R-IDE with firmware older than 2.6c (the latest one) has broken tag handling, preventing the device from working at all: usb 1-1: new full-speed USB device number 2 using uhci_hcd usb 1-1: New USB device found, idVendor=04ce, idProduct=0002, bcdDevice= 2.60 usb 1-1: New USB device strings: Mfr=1, Product=1, SerialNumber=0 usb 1-1: Product: USB Device usb 1-1: Manufacturer: USB Device usb-storage 1-1:1.0: USB Mass Storage device detected scsi host2: usb-storage 1-1:1.0 usbcore: registered new interface driver usb-storage usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd usb 1-1: reset full-speed USB device number 2 using uhci_hcd Add US_FL_BULK_IGNORE_TAG to fix it. Also update my e-mail address. 2.6c is the only firmware that claims Linux compatibility. The firmware can be upgraded using ezotgdbg utility: https://github.com/asciilifeform/ezotgdbg Acked-by: Alan Stern Signed-off-by: Ondrej Zary Cc: stable Link: https://lore.kernel.org/r/20210913210106.12717-1-linux@zary.sk Signed-off-by: Greg Kroah-Hartman commit e316892ec618b0476111bf720415fd62e084762b Author: Jan Beulich Date: Mon Sep 20 18:15:11 2021 +0200 xen/x86: fix PV trap handling on secondary processors commit 0594c58161b6e0f3da8efa9c6e3d4ba52b652717 upstream. The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman commit 26fe3ebfeea76193ce769cd79efbef7fcfa24e73 Author: Steve French Date: Thu Sep 23 19:18:37 2021 -0500 cifs: fix incorrect check for null pointer in header_assemble commit 9ed38fd4a15417cac83967360cf20b853bfab9b6 upstream. Although very unlikely that the tlink pointer would be null in this case, get_next_mid function can in theory return null (but not an error) so need to check for null (not for IS_ERR, which can not be returned here). Address warning: fs/smbfs_client/connect.c:2392 cifs_match_super() warn: 'tlink' isn't an ERR_PTR Pointed out by Dan Carpenter via smatch code analysis tool CC: stable@vger.kernel.org Reported-by: Dan Carpenter Acked-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman commit 5a2c093a738f1feb36678314a53b76738f23a5d0 Author: Dan Carpenter Date: Thu Sep 16 16:57:37 2021 +0300 usb: musb: tusb6010: uninitialized data in tusb_fifo_write_unaligned() commit 517c7bf99bad3d6b9360558414aae634b7472d80 upstream. This is writing to the first 1 - 3 bytes of "val" and then writing all four bytes to musb_writel(). The last byte is always going to be garbage. Zero out the last bytes instead. Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Dan Carpenter Cc: stable Link: https://lore.kernel.org/r/20210916135737.GI25094@kili Signed-off-by: Greg Kroah-Hartman commit 1e69d3e992aa6bf04ee9ec4e6aba9e51a1131e28 Author: Dan Carpenter Date: Mon Sep 6 12:42:21 2021 +0300 usb: gadget: r8a66597: fix a loop in set_feature() commit 17956b53ebff6a490baf580a836cbd3eae94892b upstream. This loop is supposed to loop until if reads something other than CS_IDST or until it times out after 30,000 attempts. But because of the || vs && bug, it will never time out and instead it will loop a minimum of 30,000 times. This bug is quite old but the code is only used in USB_DEVICE_TEST_MODE so it probably doesn't affect regular usage. Fixes: 96fe53ef5498 ("usb: gadget: r8a66597-udc: add support for TEST_MODE") Cc: stable Reviewed-by: Yoshihiro Shimoda Acked-by: Felipe Balbi Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20210906094221.GA10957@kili Signed-off-by: Greg Kroah-Hartman commit 70b290743214c6c9758cf77f5d4636480782206c Author: Wengang Wang Date: Fri Sep 24 15:43:35 2021 -0700 ocfs2: drop acl cache for directories too commit 9c0f0a03e386f4e1df33db676401547e1b7800c6 upstream. ocfs2_data_convert_worker() is currently dropping any cached acl info for FILE before down-converting meta lock. It should also drop for DIRECTORY. Otherwise the second acl lookup returns the cached one (from VFS layer) which could be already stale. The problem we are seeing is that the acl changes on one node doesn't get refreshed on other nodes in the following case: Node 1 Node 2 -------------- ---------------- getfacl dir1 getfacl dir1 <-- this is OK setfacl -m u:user1:rwX dir1 getfacl dir1 <-- see the change for user1 getfacl dir1 <-- can't see change for user1 Link: https://lkml.kernel.org/r/20210903012631.6099-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Junxiao Bi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman